laboratory gas calibrator News

  • Laboratory Conference

    Kuwait Laboratory Technology Conference is a multi-tracked conference and tradeshow for the laboratory industry, to take place on 30th November and 1st December 2010 in Kuwait. It will cover a diverse range of subjects relating to the science and technology used in medical and non-medical laboratories, as well as their management. It will provide scientists, technicians, laboratory managers and ...

  • EN ISO 17025 calibration

    On rare occasions, e.g. when a device is used for measurement of emissions of industrial objects (and based on that a fine for environment pollution is calculated) the device must hold a valid calibration certificate, issued by authorised, accredited laboratory. madur co-operates with accredited laboratory, therefore it is possible to deliver any device with the mentioned ISO 17025 certificate. ...


    By madur Polska Sp. z o.o.

  • MAX300 LG: Quantitative Laboratory Gas Analyser

    With immediate effect Henniker Scientific Ltd. of Warrington, England announce the release of the MAX300 LG Quantitative Gas Analyser. Quantitative Gas Analysis, performed with precision, accuracy and repeatability, demands an analyser with exceptional stability & repeatability characteristics coupled with an inlet system and analysis methods that can handle routine calibrations and ...


  • Certification of calibration instruments for refrigeration

    Equipment Subject to Adjustment: The equipment that should be subject to periodic calibration are: Digital thermometer 4-way Manifold for R410A and R407c analog or digital Electronic balance; Digital Caliper / Meter AC Refrigerant gas leak detector The calibration process is the operation that the door, by comparison with a standard instrument , ...


    By Eurotec BT Srl

  • The high performances gas diluter/calibrator from LNI Swissgas

    LNI Swissgas in Geneva/Switzerland is proud to announce the launch of the new gas dilutor/calibrator: the Sonimix Sx7100. The Sx7100 is the 2nd generation of the previous Sx7000. It uses a combination of high precision Mass Flow Controllers (MFC’s) according to the norm ISO 6145-7. The goal of the Sx7100 is to reduce the amount of gas cylinders standards and generate any mixture ...


    By LNI Swissgas

  • Instrument for the preparation of gas standards for mono and/or multipoints calibration: airmoCAL M

    Simple and accessible through its integra­ted software, airmoCAL M can be used to calibrate analytical instruments with standard bottles or permeation tubes. airmoCAL M can automatically prepare and inject gas for all kinds of analytical instruments. The principle of this device is based on mixing, dilution and injection of calibration gases, which can be useful in many applications, such as ...


    By Chromatotec Group

  • Dynamic calibration of pressure sensors for engines

    The characterisation of the pressure sensors used to develop the next generation of petrol and diesel engines is crucial to optimising their design, improving efficiency and reducing emissions. The National Physical Laboratory (NPL) has developed shock tube facilities for the calibration of these sensors under the dynamic pressure conditions that they experience in use. Manufacturers of petrol ...

  • Matrix Gemini LIMS for Environmental Laboratories

    Autoscribe Informatics has published a useful downloadable 9 page guide: Matrix Gemini LIMS for Environmental Labs highlighting the use of its Matrix Gemini LIMS (Laboratory Information Management System) for the testing of water, air, gas, soil, and/or leachate samples in environmental laboratories. This new publication highlights how Matrix can be readily configured to accommodate varying local ...


    By Autoscribe Informatics

  • Gas dosing units for corrosion testing laboratories developed and successfully installed in the PR China

    QCAL Messtechnik GmbH – manufacturer of gas mixing and dosing equipment for laboratory use – is represented since January 2012 in the PR China by Beijing Ruixin Yuantai Technology Development Co. Ltd.. In Shanghai and Xiamen the first units have been installed for corrosion tests for the shipbuilding industry according to IMO DE53/WP.2. For those tests a special gas atmosphere is ...


    By QCAL Messtechnik GmbH

  • Neptune - LIMS for all water testing laboratories

    Neptune - LIMS -The Modern Solution for all Water Testing Laboratories Laboratories that support water treatment plants have long discovered the benefits of Laboratory Information Management Systems - LIMS. Today many laboratories are looking to replace their earlier systems with ones that are easier to support, more friendly to use and that can be connected easily with other plant computer ...


    By Autoscribe Informatics

  • Humidity calibration in non-air gases at above-atmospheric pressures

    Many laboratories can only perform humidity calibrations in air at atmospheric pressure. However, industrial humidity measurements may be at high pressures, or in other gases. For best validity, humidity calibrations should ideally be in the gas medium of use, because the performance of some hygrometers can depend on gas species and pressure. Calibration ...

  • Sierra Wins the 2013 Laboratory Equipment Readers` Choice Award

    Sierra Instruments is pleased to announce that their SmartTrak 100 Series with Compod  is the winner of Laboratory Equipment Readers' Choice Award for meters, monitors, and gauges. For over a decade, scientists, lab technicians and managers have used the ...


    By Sierra Instruments, Inc.

  • The simple solution to gas detection

    The Kitagawa Gas Detector Tube System is used by industries worldwide to detect gases and vapours, simply and reliably, without the need for calibration effort or power supply. It’s as easy to use as 1-2-3! - Lightweight, compact and easy to carry - Simple to operate for all personnel - An accurate reading obtained in a few minutes - Can be used in flammable atmospheres - ...

  • ASTM B810 - 01a(2011) standard test method for calibration of atmospheric corrosion test chambers by change in mass of copper coupons

    Electrical devices that contain electrical contacts generally contain some copper-based materials. Atmospheric corrosion of copper parts in such devices often occurs in service environments. A quantitative measure of the effect of a laboratory corrosion test on copper permits assessment of the severity of the test. In addition, corrosion tests may be defined in terms of their effect on copper; ...


    By ASTM International

  • New portable FTIR Gas Analyser detects almost any gas

    Gasmet Technologies Oy (Finland) has announced the launch of the DX4040 – a portable FTIR gas analyser that enables the field measurement of literally thousands of gases. The DX4040 is the second generation of the world’s first truly portable FTIR analyser which brought laboratory grade gas analysis into the field, and thereby brought the benefits of multiparameter FTIR gas analysis ...


    By DECHEMA Ausstellungs-GmbH

  • New portable FTIR Gas Analyser detects almost any gas

    Gasmet Technologies Oy (Finland) has announced the launch of the DX4040 – a portable FTIR gas analyser that enables the field measurement of literally thousands of gases. The DX4040 is the second generation of the world’s first truly portable FTIR analyser which brought laboratory grade gas analysis into the field, and thereby brought the benefits of multiparameter FTIR gas analysis ...


    By Gasmet Technologies Oy

  • Breaking New Ground in Gas Detection

    Gas detection specialist Crowcon today celebrated the official ground breaking for its new 40,000 square foot facility at the prestigious Milton Park in Didcot, UK. Having outgrown its current headquarters location in Abingdon, the Milton Park facility will house all existing functions as well as provide extensive customer training and product ...

  • Innovation drives flue gas treatment

    Sharing a common goal, experts in emissions monitoring and emissions abatement have formed a working partnership to develop innovative new materials for treating pollutants in flue gas emissions. A business strategy with a heavy focus on innovation has enabled Lhoist, a family owned Belgian company, to become one of the world’s leading providers of Flue Gas ...


    By Gasmet Technologies Oy

  • New Portable SPECTROSCOUT XRF Analyzer Enables Laboratory-Quality Analysis in Remote Locations

    SPECTRO Analytical Instruments announces the introduction of its new SPECTROSCOUT Portable Energy Dispersive X-ray Fluorescence (ED-XRF) analyzer that enables rapid, laboratory-class elemental analysis of environmental and geological samples even in remote locations. The determination of elemental compositions onsite from far-flung mining and geological field ...

  • E1100 Hand-Held Combustion Gas Analyzer

    The NEW E1100 Hand-Held Combustion Analyzer is a rugged unit for boiler, burner, engine, turbine, furnace, and other combustion applications. Pre-calibrated and field replaceable sensors allow for easy diagnostics and replacements to reduce “down-time” and costly repair charges. The E1100 is a NEW hand-held industrial gas analyzer that is a valuable tool designed for maintenance & ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you