laser alignment system News

  • Shaft alignment tool video presentation - the Fixturlaser EVO

    Fixturlaser has developed a new shaft alignment tool, Fixturlaser EVO, which features a unique adaptive user interface. The tool's simplicity in its handling is characteristic for all Fixturlaser tools, a shaft alignment tool that can be handled by all maintenance professionals, and not only engineering experts. Please view our video presentation below for an overview of the latest in shaft ...


    By Monition Limited

  • Powerful DPSS lasers for Particle Sizing

    Our compact, powerful FlowExplorer DPSS combined with HiDense PDA is ideally suited for droplet sizing in dense sprays.  The FlowExplorer DPSS, having no optical fibers in the transmitting head, makes it an efficient unit, transmitting much of the laser power to the measurement volume. This factory aligned and turnkey system minimizes installation time and get’s you ...


    By Dantec Dynamics

  • Casella ETI launch ATEX approved laser based monitoring systems

    Casella ETi has launched the U.K.'s first tuneable diode laser emissions monitoring system with ATEX approval for use in hazardous areas. Proven technology in cross duct analysis of continuous emissions monitoring from within stacks has been also been developed to enable ...


    By Casella

  • Casella ETI launch ATEX approved laser based monitoring systems

    Casella ETi has launched the U.K.'s first tuneable diode laser emissions monitoring system with ATEX approval for use in hazardous areas. Proven technology in cross duct analysis of continuous emissions monitoring from within stacks has been also been developed to enable ...


    By Casella

  • Astro Engineering and Manufacturing Increases Laser Cutting Capacity

    Astro Engineering and Manufacturing increases laser cutting capacity with purchase of a Mazak STX-510 2500 Watt Laser Cutter.  This machine is complete with a load/unload system and with the programming software Radan, it can operate unattended for high efficiency and cost savings.  This laser cuts up to ¾” Mild Steel, 3/8” Stainless Steel, and ...

  • Delphi Midstream Partners Acquires Laser Midstream Energy; Establishing Pre-Eminent Northeast Natural Gas Gathering Company

    NEW YORK, NY -- (Marketwire) -- 07/12/10 -- Delphi Midstream Partners, LLC (DMP) announced today that it has completed its acquisition of Laser Midstream Energy, LP which is developing the first natural gas gathering project in northeastern Pennsylvania and southern New York state. Following the transaction, the name of the company was changed to Laser Northeast Gathering, LLC (Laser). Laser's ...


    By Marketwire

  • 3D-Micromac launches an innovative production system

    This June, 3D-Micromac from Chemnitz (Germany) will launch the first production equipment worldwide that can conduct the integrated series-connection of a thin-film solar module on one single platform and in one single production step. The new One-Stop-Patterning process (OSP) only structures the modules once all of the functional layers have been deposited on the substrate. This significantly ...


    By Krampitz Communications

  • Everest Visible Targeting System (Patent No. 7,355,178) Takes the Guesswork Out of Infrared Thermometry

    For some time now, infrared thermometers, such as those manufactured by Everest Interscience, have been used to measure temperatures under less-than-ideal conditions.  A major problem with infrared thermometers that frustrates the end users and prevents more widespread acceptance of infrared thermometry is the fact that the infrared measurement beam from the instrument is infrared so it is ...


    By Everest Interscience

  • Bertin Technologies acquires Saphymo strengthening instrumentation and systems division for nuclear, defense and environment

    Bertin Technologies, a subsidiary of the French industrial group CNIM1, finalized the takeover of the Saphymo Group, a French leader in systems for detecting and monitoring ionizing radiation. As a result, it has strengthened its scientific instrumentation and systems division and become the only French industrialist to offer a full range that covers both: detection and identification of ...


    By Saphymo

  • The new FlowExplorer DPSS: compact, powerful and calibrated LDA optics

    Our FlowExplorer product range is now extended with new products employing high power Diode Pumped Solid State (DPSS) lasers. The move from diode lasers to DPSS lasers allows us to increase the laser power while retaining a compact optical head. The new FlowExplorer DPSS is available with laser powers 100, 150 and 300 mW per wavelength in configurations for one, two or three velocity ...


    By Dantec Dynamics

  • LDI has passed ISO recertification

    On the 13th and 14th of November the international certification company Det Norske Veritas (DNV) verified that the quality management system of Laser Diagnostic Instruments Company still complies with the ISO 9001:2008 quality management standard and decided that recertification is granted to LDI. Next annual audit is scheduled to November 2013.  ...

  • Well-known companies at the South-East European Environmental Forum

      Well-known companies at the South-East European Environmental Forum 28-30 March 2012, Sofia, Bulgaria The latest green energy and waste ...


    By Via Expo Ltd.

  • Bertin Technologies signs a protocol with a view to acquiring Saphymo

    Bertin Technologies, a subsidiary of the French industrial group CNIM , is strengthening its range of instrumentation equipment and systems by acquiring the Saphymo Group. This take-over would take effect in early January 2015. Bertin Technologies is at the forefront of French technological and industrial innovation and has been investing for a number of years in the area of ...


    By Saphymo

  • Tri Tool builds performance with special engineering project

    Tri Tool was contracted to perform video inspection and laser weld profile measurement as a mission critical part of welding quality control for petroleum transmission pipelines. This required a stroke length beyond the scope of standard non-rotating cylinders. The weld inspection was to be performed under demanding conditions on highly specialized corrosion resistant alloy lined pipe, a process ...


    By Tri Tool Inc.

  • METTLER TOLEDO TDL Analyzers Receive Award from Frost & Sullivan for Competitive Strategy Innovation & Leadership

    Based on its recent analysis of the process tunable diode laser (TDL) analyzers market, Frost & Sullivan recognizes Mettler-Toledo AG with the 2014 Global Frost & Sullivan Award for Competitive Strategy Innovation & Leadership. ...


    By Mettler - Toledo Int. Inc

  • Lowest cost handheld XRF analyzer released by Skyray XRF

    Skyray XRF (USA) has officially released the newest version of their Handheld XRF Analyzer to the North American market. The Pocket-III builds upon the strengths of previous versions with the addition of various features and application capabilities.The Pocket-III from Skyray XRF Instrument is the lowest cost handheld system to utilize x-ray tube technology. A 4kv micro x-ray tube and silicon-pin ...


    By Skyray XRF

  • World Metrology Day 2015

    The theme for World Metrology Day 2015 is 'Measurements and Light', chosen to align with the UNESCO International Year of Light and Light-based technologies 2015 (IYL2015). This global initiative is designed to raise awareness of how optical technologies promote sustainable development and provide solutions to worldwide challenges in areas such as energy, ...

  • UK National Graphene Institute Selects Bruker’s Dimension FastScan AFM

    Bruker has established a collaborative partnership with the University of Manchester’s new National Graphene Institute (NGI) to leverage the benchmark speed, resolution and performance of the Dimension FastScan® Atomic Force Microscope (AFM) for research into the nanofabrication and nanoscale properties of graphene. Graphene, the world’s thinnest, strongest and most conductive ...


    By Bruker Corporation

  • IPM Attending AISTech 2016 in Pittsburgh

    In-Place Machining Company invites you to visit us at Booth #2653 during the Iron & Steel Technology Conference and Exposition 2016, May 16-19 at the David L. Lawrence Convention Center, Pittsburgh, Pennsylvania. The annual conference features technical presentations, plant tours, and the largest steel related exposition in North America. In-Place Machining Company provides ...


    By In-Place Machining Company

  • DOE funded research projects win 30 R&D awards for 2008

    US Secretary of Energy Samuel W. Bodman has announced that researchers from the US Department of Energy’s (DOE) National Laboratories and Y-12 National Security Complex have won 30 of the 100 awards given out this year by R&D Magazine for the most outstanding technology developments with promising commercial potential.  The coveted awards are presented annually in recognition of ...


    By US Department of Energy

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you