liquid flow monitoring News

  • Liquid Flow Measurement

    New turbine flow meters from Kimray are ideal for liquid flow measurement on or off the oilfield. They are a welcome solution to the increasing demand for simple to use measurement equipment. Constructed of 316 Stainless Steel, CD4MCU Stainless Steel and tungsten carbide these simple devices are designed to withstand the demands of the most rigorous liquid flow measurement applications. All ...


    By WIKA Instruments Ltd.

  • Flowline flow switch & control for liquid & air/gas

    Flowline's liquid and gas flow switches are simple devices that are used to detect or monitor flow and send a signal or alarm to another device. They are useful tools in situations where it is important to know whether or not flow exists and to act upon that knowledge (for example they can be used to actuate a signal when flow stops, start a motor with flow, shut off an alarm when flow is ...


    By icenta Controls Ltd

  • Introducing the New IC-LPM Series of Liquid Paddlewheel Flow Meters

    The IC-LPM series of paddlewheel meters provides accurate flow rate monitoring over the range of 0.5 to 1200 l/min with standard nominal sizes up to 50 mm.  A simple yet robust stainless steel construction offers excellent corrosion resistance and a versatile design with custom options can be easily adapted to meet varying flow monitoring requirements: additional meter sizes and flow ranges, ...


    By icenta Controls Ltd

  • Contact-free precise measurement: Flow meter for pulsing liquids

    Heidelberg, July 2010. World premiere at the IFAT ENTSORGA: ProMinent is introducing its newly developed flow meter for the first time at the world's leading trade fair for water, sewage, waste and raw materials management. Its unique feature is that for the first time the flow-through of a non-continuous flow and the amount of liquid which has flowed through ...

  • ProMinent: Flow meter for metering the flow-through of a pulsing flow

    ProMinent is showcasing its newly developed flow meter DulcoFlow®  at ACHEMA in hall 8 stand J94. Its unique feature is that for the first time the flow-through of a non-continuous flow and the amount of liquid which has flowed through in a pulsing flow regime can be reliably and precisely determined and monitored. The ProMinent developed flow meter is based on the ultrasonic ...

  • Liquid Level Alarm for Drums, Tanks and Containers

    Rochester, NY – Gizmo Engineering introduces the first liquid level alarm that monitors liquid level in chemical drums, tanks and containers that is battery-powered. Developed for automated chemical processes where liquid is continually pumped out of drums, it neatly solves the problem of having the drums run empty without notice. When a drum level is too low, the Drum Alarm® beeps and flashes ...


    By Gizmo Engineering

  • Complex issues with incinerating liquid and gaseous residues

    Production processes in the chem-ical and pharmaceutical industries give rise to gaseous and liquid residues that are preferably disposed of in decentralized incinerators. Most of these residues are highly caloric gases and solutions containing high concentrations of organic substances. The complexity of these often toxic substances requires the use of special equipment for the incineration ...

  • Genie membrane filters protect against Analyser Liquid damage

    When gas is extracted from a gas field, it requires processing before it can be sold. In the natural gas industries, one of the most important, yet difficult and challenging tasks for process engineering is measuring moisture in a multitude of process gases and liquids. Liquids and moisture will naturally make up a proportion of gas samples. In order to make the gas suitable for sale and use, the ...


    By a1-cbiss

  • Proline 300/500 – Flow measuring technology for the future

    For 40 years, Endress+Hauser has been offering one of the most comprehensive product ranges worldwide for flow measurement of liquids, gases and steam. The Proline device family has contributed significantly to this success and is now once again wowing users with unique innovations to ensure highest process and product quality. The Proline 300/500 generation combines Proline sensors, which have ...


    By Endress Hauser

  • Water Samplers and Flow Meters Featured in Isco Stand at ACHEMA 2006

    Lincoln, NE – The Isco-brand environmental water monitoring products of Teledyne Isco, Inc. – including the Model 2150EX flow meter for ATEX Zone 0 and Zone 1 manhole installations – will be featured in Hall 10.2, stand A34-A35. Teledyne Isco, Inc. is a leading manufacturer and supplier of rugged, reliable in-plant and field-portable instruments for monitoring water quality and pollution. ...


    By Teledyne Isco

  • FlowCERT - the most accurate open channel flow measurement available anywhere

    Pulsar Process Measurement of Malvern announce the launch of FlowCERT, a new non-contacting ultrasonic open channel flow measurement system that uses unique and patented technology to achieve measurement accuracy that was previously impossible, helping companies to achieve the MCERTS standards. FlowCERT consists of a dedicated control unit, which makes calculations to BS3680 across every ...

  • Air Monitors launches new bioaerosol sampler

    Amidst growing concerns with the health effects of airborne particles, Air Monitors, a specialist instrumentation company, is launching a new portable air sampler which significantly enhances the ability to measure and control biological contamination. The ‘Coriolis µ’ has a new wet-walled cyclone technology that improves bioaerosol sampling for bacteria, pollen, endotoxins, ...


    By Air Monitors Ltd.

  • Rotork provides electric solutions for automated flow control at the Botlek Tank Terminal

    The recently opened Botlek Tank Terminal (BTT) at Rotterdam relies on Rotork’s latest electric valve actuation technologies for automated flow control and vital safety related duties associated with the import, export and storage of a varied range of liquid bulk products. Construction of the €70 million first phase of the terminal began in April 2010 and was completed ...


    By Rotork

  • Daimer Introduces Carpet Cleaners with Self-Monitoring Technologies

    Daimer Industries, Inc.®, the world's most trusted brand of U.S.A. made cleaning machines, including carpet steam cleaners and industrial-level truck mount carpet cleaners, presents the XTreme Power® XPH-9605 portable system. The company's feature-rich, high-performance commercial carpet cleaning equipment offers superior cleaning results, given the product's high pressure, advanced ...


    By Daimer Industries Inc.

  • Sierra expands primary standard gas flow calibration systems & online store

    Sierra Instruments, a leading global mass flow meter and controller manufacturer, is pleased to announce the expansion of their primary gas flow calibration systems with the new economical CalTrak® 300 and 350. With increased portability and ease-of-use, now end-users can deliver precision flow calibration and validation, based on a primary standard, ...


    By Sierra Instruments, Inc.

  • Air Monitors targets UK food sector

    The specialist instrumentation provider, Air Monitors, has launched a new division to cater specifically for the air monitoring requirements of the food industry. Sales Manager Colin Craggs says “This initiative has been taken in response to a recent rise in enquiries from the food and beverage markets, combined with advances in measurement technology.” The new division will focus on ...


    By Air Monitors Ltd.

  • NPL trials identify improved bioaerosol monitoring technology

    Trials conducted by the National Physical Laboratory (NPL) have identified improved methodologies for sampling and measuring bioaerosols at composting facilities. Commissioned by Defra, the first project began in 2008 and the results of a larger series of trials will be published later this summer. Background As the UK seeks to reduce the quantity of waste going to landfill, there ...


    By Air Monitors Ltd.

  • WWEM 2012 to focus on the quality of monitoring- WWEM Conferences

    WWEM 2012, the 5th in a series of highly successful environmental monitoring events, will return to the Telford International Centre on 7th and 8th November 2012 to provide visitors with the latest information on regulations, standards, methods and technologies employed in laboratory, field and process monitoring applications. Organised in conjunction with the Environment Agency and the Water ...

  • MCERTS delivers confidence in multi-parameter monitors

    Simon Wills, Managing Director of OTT Hydrometry, the hydrometeorological and water quality instrumentation company, was presented with an MCERTS certificate for Hydrolab water quality monitors at WWEM 2010. Simon was accompanied by Lea Ann Zullig the Global Director of Sales and Marketing for Hydrolab products. In this article, Simon explains the reasoning behind this initiative and outlines the ...

  • New Sampling Technology Allows Reaction Monitoring Under Any Chemical Conditions

    METTLER TOLEDO ReactIR technology allows the sampling of any chemistry under a wide range of batch and continuous reaction conditions. Robust sampling technology enables chemical reaction monitoring and analysis of even the most difficult chemistry including corrosive slurries, acidic slurries, caustic slurries and abrasive slurries. METTLER TOLEDO is pleased to announce the ...


    By Mettler - Toledo Int. Inc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you