magnetic scrap drum News

  • Eriez offer solution to meatball problems with new scrap drum

    Eriez Magnetics Europe Ltd has recently launched their Super Strength P- Rex Permanent Magnetic Scrap Drum. For many years electric motors or meatballs in shredder streams have caused problems for both scrap processors and steel mills. With the launch of this new Separation System Eriez can minimise meatball hassles and maximise revenue opportunities while reducing the need for hand sorting. The ...

  • Trends in the production and use of Shredded Steel Scrap - AMM scrap conference

    It is generally useful to understand a speaker's point of view so that you can make some judgment as to his particular set of prejudices.  In my case, I am Chairman of The Shredder Company, LLC, which manufactures scrap steel shredding equipment and which also operates an electric furnace steel foundry.  I am Chairman of Newell Recycling Company of El Paso which operates a complete ...


    By The Shredder Company (TSC)

  • Mastermag drum refurbished after 20 years in operation

    At Master Magnets, separation equipment supplied to customers is always of the highest manufacturing quality. This ensures that the units will provide not only the best possible levels of separation but will also ensure a very long operational life. Recently, Master Magnets were contacted by a steel recycling company based in Israel. The company had an Electromagnetic Drum Separator that was ...


    By Master Magnets Ltd

  • Eriez introduces the New Shred1 Ballistic Metal Sorter to Scrap Processors

    Eriez Magnetics Europe Ltd introduces their new Shred1™ Separator which uses ballistics to efficiently separate iron-rich ferrous from much of the mixed metals and waste material in the post Magnetic Drum flow in scrap processing lines. This powerful and innovative separator delivers three distinct fractions with the first being a high value, low-copper content ferrous product. This ...


    By Eriez Magnetics Europe Ltd

  • Eriez Magnetics - PR1020 Eriez Focus on recycling

    Waste management and investing in recycling remains high on the political agenda and there is a growing demand for recycling plants and a need for the development of new improved recycling equipment. To meet and appreciate the specific needs of the recycling industry Carlton Hicks, who has been employed by Eriez for five years, has been specifically charged with the development and sales of ...


    By Eriez Magnetics Europe Ltd

  • Steinert GmbH: Premiere at Ligna High-efficiency scrap wood recycling ISS — new process separates scrap wood and stainless steel

    Cologne - At the Ligna trade fair (Stand F03, outdoors), Steinert GmbH will be exhibiting machines that provide efficient metals separation and sorting for scrap wood. “As a technological leader, we have the know-how required to ensure very thorough separation of different materials. For the chipboard and pellet industry, this is a crucial criterion when it comes to decision-making,” says ...

  • Eriez magnetics - PR1019 Eriez introduce new equipment at RWM and IFAT 2010

    Optimum separation is a key stage in all applications. Eriez has designed and developed an extensive range of separators utilising magnetic principles, and at RWM, UK (stand 1410, Hall 17) and IFAT, Germany (Stand 500, Hall B3) in September 2010, Eriez will be launching 3 new systems for non ferrous and ferrous metal recovery. On the exhibition stands at both RWM and IFAT, Eriez will be ...


    By Eriez Magnetics Europe Ltd

  • The Masters ‘Sort Out’ BMW

    Master Magnets Ltd custom built and designed a swarf separator for one of the world’s largest car manufacturers. BMW had the problem of obtaining clean aluminium from left over swarf at their engine manufacturing plant at Castle Bromwich in the Midlands BMW. BMW had the problem of obtaining clean aluminium from left over swarf at their engine manufacturing plant at Castle Bromwich in the ...


    By Master Magnets Ltd

  • Started with the production of our New Vertical Shredder T6000

    Recent period, our engineers have been tremendously busy with new developments. We have developed a complete new plant: Namely: VERTICAL SHREDDER T-REX in four different models, 1500, 2500, 3500, and 6000. This system is particularly suitable for processing Scrap metals, electronic scrap, contaminated plastics etc. The plants are available from 90kW, tilll  440kW motors! And capacities range ...

  • Greek Slag Separation

    The UK based firm Master Magnets Ltd, recently supplied a variety of custom built magnetic separation equipment for a slag processing plant in Greece. Raw slag originates as left over material from refining and furnace operations, with metal still contaminated within it. Slag is often received in pots from blast furnaces tapping troughs or steel furnace refining vessels, and there will also ...


    By Master Magnets Ltd

  • EDDY GOES TO CHINA

    One of the main steel recyclers in China, Ghangzhou Asia Steel Ltd, has welcomed our Eddy Current Separator plant – which comes with a vibratory feeder and drum magnet – as the ideal solution for sorting fine particles. Based in the region of Whampoa, the company operate an ELV (End of Life Vehicle) plant and needed to efficiently recycle the finer scrap materials. Particles that measure between ...


    By Master Magnets Ltd

  • UK firm exports a complete recycling plant to China

    The UK company, Master Magnets Ltd, have recently designed, manufactured and delivered an Eddy Current Separator plant complete with a vibratory feeder and drum magnet to a major steel recycler in China. Ghangzhou Asia Steel Ltd are one of the main steel recyclers in China, based in the region of Whampoa. They have had great success in the metal recycling market, and a few years ago they ...


    By Master Magnets Ltd

  • Success for Eriez recycling division

    Eriez Magnetics Europe Ltd have been successfully improving their Recycling Division in 2011 with a dedicated team of recycling specialists and three new product launches (R-Rex Permanent Magnetic Scrap Drum, ProSort II Airless Metal Sorter and RevX-E Eccentric Eddy Current Separator). This increases the levels of metal reclamation possible with Eriez Magnetic Separation Equipment in the ...


    By Eriez Magnetics Europe Ltd

  • Eriez PokerSort Recovers Troublesome Rod Shaped Metals

    Eriez Magnetics Europe Ltd, as part of its dedication to continually advancing and transforming the metals recycling industry, introduces the PokerSort into the European recycling market. This new Magnetic Separator uses a special design permanent Magnetic Drum to help alleviate issues caused by long rod-like pieces of ferrous metals, typically over 600mm (24 inches) in length, that can damage ...


    By Eriez Magnetics Europe Ltd

  • Eriez join BIR

    Eriez Magnetics Europe Ltd has successfully become members of the BIR (Bureau of International Recycling). The BIR is a non-profit organisation which was founded in 1948. It was the first federation to support the interests of the recycling industry on an international scale and today represents over 750 member companies from the private sector and 40 national associations in more than 70 ...


    By Eriez Magnetics Europe Ltd

  • Wendt Corporation Announces Installation of Modular Model 60 Shredder at Rochester Iron & Metal

    Wendt Corporation announced another installation of their newly designed Model 60 shredder at Rochester Iron & Metal in Rochester, IN. The Model 60 is Rochester’s first automobile shredder and is part of their overall strategy to aid the company’s growth and expand their presence in the industry. Rochester Iron & Metal is a fourth generation, family owned ...


    By WENDT CORPORATION

  • Innov-X Systems, Inc. And Steinert cooperate to advance meatball extraction technology

    Innov-X Systems and Steinert have entered into an OEM agreement to market a new high speed, x-ray fluorescence-based (XRF) sorting system that will effectively identify and remove copper containing material, such as “meatballs”, from ferrous scrap. This new technology will be a welcome solution for metal recyclers worldwide who have long been challenged by copper contaminants in steel ...

  • WENDT Corporation Announces the Commissioning of a Model M6090 Shredder at Triple M Metal

    WENDT Corporation has announced the commissioning of a Model M6090 shredder at Triple M Metal LP in Sault Ste. Marie, Ontario, Canada. The WENDT Model M6090 was commissioned on May 9 and represents the first shredder installation for this site. ...


    By WENDT CORPORATION

  • Innov-X and Steinert cooperate in meatball extraction technology

    WOBURN, MA – April 28th, 2010 –Innov-X Systems and Steinert have entered into an OEM agreement to market a new high speed, x-ray fluorescence-based (XRF) sorting system that will effectively identify and remove ...


    By Olympus

  • Until now, bulky steel shavings covered with oil have, in the most part, simply been disposed of, thus wasting valuable resources

    Until now, bulky steel shavings covered with oil have, in the most part, simply been disposed of, thus wasting valuable resources. In order to avoid this, the company GEZE GmbH searched for a method of reducing the volume of the shavings and simultaneously recovering the oil adhering to them for re-use. The company Erdwich Zerkleinerungssysteme GmbH developed a plant for this purpose, which ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you