magnetic separation News

  • Overbelt Magnetic Separator for Tyres recycling

    INNOVATIVE FERRO SEPARATION FOR TYRES Cogelme introduces a new type of magnet separator, the Cogelme Tyre Recycling Magnet, which separates Ferrous threads in a very efficient manner from car and truck tyres. The Cogelme Tyre Recycling Magnet is developed together with one of the biggest tyre recyclers of North Italy. Regular tyre recycling Iron fraction ...

  • Fast track to magnetic separation equipment

    Eriez Europe, a leading authority in magnetic technologies, based in South Wales, UK is delighted to announce the launch in Europe of the Eriez Xpress programme providing fast shipment on the most common magnetic separation equipment in the industry.  The new Eriez Xpress programme will enable for faster processing of customer requirements. Gareth Meese, sales director at Eriez Europe ...


    By Eriez Magnetics Europe Ltd

  • Foreign Bodies in Food – Magnetic Separation

    With the increasing pressure to ensure that food standards comply with government guidelines and producers provide consumers with optimum quality products, the Magnetic Separation process plays a vital role in removing ferromagnetic and paramagnetic particles ...


    By Eriez Magnetics Europe Ltd

  • Magnetic Separation Myths 6 of 10 the Magnetic Field is Uniform along the Cartridge or Tube Magnetic Separator

    On a typical Cartridge or Tube Magnetic Separator, the magnetic field on the surface is not even along the whole length.  As shown on the photograph, magnetically attracted materials agglomerate at specific points along the length.  So why is that? A Cartridge or Tube Magnetic Separator is constructed by placing an alternating series of magnet slugs and steel discs inside a stainless ...


  • 600 & counting - Merger in magnetic separation technology

    Combination of two organisations almost 600 days ago has resulted in the emergence of a strong, capable and dynamic force in magnetic separation technology. Steinert Sturton-Gill Magnetics of Melbourne, Australia, began with the foresight and needs of two separate entities, half a world apart. While both were leaders in their respective fields and both share extensive expertise in ...

  • Magnetic Separator Technology Minimizes Compressor Downtime

    Removing Buffer Gas Contamination will reduce Seal FailureMagnetic separator technology is the key to minimizing compressor downtime. Over 80% of centrifugal gas compressors manufactured today are equipped with dry gas seals. Dry gas seals are a non-contact seal with a running gap between the primary and mating seal rings of approximately 3 to 4 microns. Buffer gas is used as a sealing and ...


    By One Eye Industries Inc.

  • Metal-free waste flows with magnetic separator

    The redesigned High Gradient Separator has been specially developed for the recycling industry; and is particularly suitable for a difficult and dirty work environment. The magnetic value of the coil has been increased to 10,000 Gauss. This allows the magnetically weak Iron and RFS particles to be removed from waste and residual streams as well. In the recycling world, more and more RFS is found ...

  • New Photographs of the FF Series Drawer Magnetic Separator

    The Bunting Magnetics Europe photograph gallery on Flickr continues to grow and the latest additions are recently taken images of the FF Series Drawer Magnetic Separators. The FF Series Drawer Magnetic Separator is used in a wide range of bulk handling ...


  • More Magnetic Separation to Achieve EU Targets?

    The UK recycling publication MRW featured a news article entitled ‘Metal targets matter’ in the 11 October 2014 issue. The article stated that Alupro, the UK’s aluminium packaging industry association, expressed concerns at suggested EU packaging recycling targets for 2030. Alupro quoted recycling rates for aluminium packaging as now being over 43% but also added “we ...


  • Metal-free waste flows with magnetic separator

    The re-designed High Gradient Separator has been specially developed for the recycling industry; and is particularly suitable for a difficult and dirty work environment. The magnetic value of the coil has been increased to 10,000 Gauss. This allows the magnetically weak Iron and RFS particles to be removed from waste and residual streams as well. In the recycling world, more and more RFS is found ...


    By Goudsmit Magnetic Systems BV

  • Interplas 2014 – Leading The Way With Magnetic Separation

    Bunting Magnetics Europe Ltd was the only magnetic separation supplier exhibiting at Interplas 2014 (staged at the NEC in Birmingham between 30th September and the 2nd October 2014).  Simon Ayling, the Bunting Europe Managing Director explained: “For us at Bunting, supplying and supporting the plastics industry has always been vitally important.  Whether that is working with a ...


  • Three-stage magnetic separator removes all metals from waste streams

    Goudsmit has recently designed and produced a compact unit that combines a conventional magnetic separator, high-gradient separator and non-ferrous separator. This three-stage separator removes normal iron parts, followed by weakly magnetic metal parts (including a large variety of stainless steels), and finally non-ferrous metal parts. This all takes place over a distance of approximately 7 ...


    By Goudsmit Magnetic Systems BV

  • Three-stage magnetic separator removes all metals from waste streams

    Goudsmit has recently designed and produced a compact unit that combines a conventional magnetic separator, high-gradient separator and non-ferrous separator. This three-stage separator removes normal iron parts, followed by weakly magnetic metal parts (including a large variety of stainless steels), and finally non-ferrous metal parts. This all takes place over a distance of approximately 7 ...

  • Suspended overband magnets successfully separate Eriez Europe from the competition

    The recovery of valuable metals that have incorrectly been disposed of into the non-recyclable waste system, is a widespread problem throughout the Energy from Waste process. However, Eriez Magnetics Europe are able to provide the perfect solution. Viridor has recently installed two of Eriez’ impressive Multi Pole (MP) suspended magnets at their new £223m Energy Recovery ...


    By Eriez Magnetics Europe Ltd

  • Magnetic system separates three types of metal at the same time - three-stage magnetic separator removes all metals from waste streams

    Goudsmit has recently designed and produced a compact unit that combines a conventional magnetic separator, high-gradient separator and non-ferrous separator. This three-stage separator removes normal iron parts, followed by weakly magnetic metal parts (including a large variety of stainless steels), and finally non-ferrous metal parts. This all takes place over a distance of approximately 7 ...


    By Goudsmit Magnetic Systems BV

  • Outotec wins further order for magnetic separators in Sierra Leone

    Outotec has secured a repeat order from London Mining plc to supply high gradient magnetic separators for the Marampa iron ore project in Sierra Leone. London Mining purchased the first magnetic separators for the project in 2010. The installation of these first Outotec magnetic separators is nearly complete with start-up expected later this year. The ...

  • PR1106 eriez introduces new eccentric Eddy current separator (eriez magnetics)

    Eriez Magnetics Europe Ltd recently introduced its new RevX-E Eccentric Eddy Current Separator.  It is the first Eddy Current Separator from Eriez to have an eccentric magnetic rotor to allow single point separation, which is different from the usual concentric design.  It provides unique separation solutions for the dynamically changing recycling industry.   Like all Eriez Eddy ...


    By Eriez Magnetics Europe Ltd

  • Eriez Trunnion`s Magnetic Separator used to improve chromite concentrate production

    An Eriez Trunnion Magnetic Separator has been utilised by Finnish ferrochromium producers, Outokumpu Tornio Works, in their efforts to improve chromite concentrate production in the company’s Kemi Mine.The Eriez Trunnion Magnet is a powerful system for the automatic separation and removal of processing balls and ferrous chips from milled ore in ball or SAG mills. Typically the system consists of ...


    By Eriez Magnetics Europe Ltd

  • Newly developed separator also removes weak magnetic parts - magnet removes stainless steel particles from waste streams

    Goudsmit has recently improved the High Gradient Separator. The standard High Gradient Separator was originally developed for the cleaning of chrome sand in foundries and the removing of black specks from salt or ceramics, for example. The magnetic value of the roll was increased to 16 000 Gauss for the improved version. This means that now even slightly magnetized Fe and STAINLESS STEEL ...


    By Goudsmit Magnetic Systems BV

  • OVERBAND MAGNETS NOW IN STOCK!

    Master Magnets now hold in stock Overband Separators ready for a next day delivery.This facility will enable our customers to reduce downtime and lost revenue while waiting for an Overband magnet to be manufactured.  This latest initiative responds to customer demand and is part of the Master Magnets push to further increase competitiveness in a global market. Common sizes and models will be ...


    By Master Magnets Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you