manufactured water control product News

  • On-site analysis of cannabis potency using Infrared spectroscopy

    Cannabis is increasingly being recognised for its therapeutic value. This has led to a reduction in its regulation, and even its legalisation, by many different governments. As cannabis production becomes legalised and regulated it is important that manufacturers can assess the chemical content and potency of their plants. The value of cannabis in the control of pain, spasm and a range of ...


    By Specac Limited

  • CETCI Expands Manufacturing Capabilities & Increases Productivity

    Critical Environment Technologies Canada Inc. (CETCI) has doubled its manufacturing and office space to approximately 11,000 square feet as of December 1, 2010. The service department and production department for portable IAQ instruments have moved into the new additional space. Meanwhile, production department for fixed gas detectors has utilized the space vacated by the portables and service ...

  • Polymer manufacturing turns to Rotork for improved control valve performance

    The introduction of Rotork CVA all-electric control valve actuation technology has improved the efficiency of the production process for a leading polymer manufacturing company in Australia. Era Polymers is a world-class manufacturer of polyurethane systems, producing a diverse range of cast elastomer prepolymers including spray polyurethane and polyureas, rigid and flexible foam systems, ...


    By Rotork

  • CVA delivers accurate valve control for Asian glass manufacturer

    An Asian fibreglass manufacturer uses electric valve actuators at several of its plants. Previously, a locally made control valve and actuator was used, which suffered from poor performance and inaccurate valve control. Raw fibreglass material in pellet form is transported from a hopper into a furnace and melted. Globe control valves must accurately control the ratio of natural gas and oxygen ...


    By Rotork

  • FDA's New Rule: Bottled Water Manufacturers Required to Monitor DEHP Levels

    The Food and Drug Administration recently announced a new maximum allowable level—0.006 mg/l—for diethylhexyl phthalate (DEHP) in bottled water. The chemical is commonly used to make plastics more flexible.   Source water will continue to be monitored according to current good manufacturing practice (cGMP) criteria, but the new rule mandates that finished bottled water products ...


    By EMSL Analytical, Inc.

  • Rhode Island concrete manufacturer pays penalty for clean water violations (RI)

    Subject to court approval, Cardi Materials, LLC of Warwick, R.I., will pay a $55,000 civil penalty and perform an additional project costing $168,500 to resolve numerous violations of the Clean Water Act at its Warwick concrete manufacturing facility. In addition to a financial penalty, the proposed settlement requires Cardi to eliminate all process water discharges from the facility. Process ...

  • Demanufacturing could become the new manufacturing

    As well as being taught the three Rs of reading, writing and arithmetic, schoolchildren nowadays learn new three Rs: reduce waste, re-use and recycle. But now there is a fourth ‘R' that manufacturers must learn: re-design. Companies that ...


    By Faversham House Ltd.

  • Product Highlight

    Most oilfield produced waters and other oily wastewaters have high fouling potential for optical sensors. High Cost Ultrasonic Cleaning systems only address the local optical path and not the entire sample system. The TurnerCIP (Clean In Place) addresses the entire sample system in the same way that CIP’s are used to clean heat exchangers and other oily systems in heavy industry worldwide. ...

  • Water for Purists: Dime Water`s New Water Treatment Product Line

    Wellness enthusiasts and water purists rejoice! Dime Water Inc. is proud to announce our new line of custom-built products in the wellness industry, which we call WFP (Water for Purists). Since our inception, we evolved with the thought that innovative ideas regarding our drinking water are most welcome, thus, we are always researching and experimenting with products that we ...


    By Dime Water

  • OxyGreen Corporation and Enviro-Equipment, Inc announce manufacturing agreement for oxygreen cells and control panels

    OxyGreen Corporation, an engineering technology company producing U.S. patented groundwater remediation products and Enviro-Equipment, Inc, a manufacturer of UL certified control panels and specialized environmental remediation equipment announce today an exclusive agreement for commercial manufacturing of OxyGreen cells and control panels OxyGreen Corporation, an engineering technology company ...


    By Enviro-Equipment, Inc.

  • OxyGreen Corporation and Enviro-Equipment, Inc Announce Manufacturing Agreement for OxyGreen Cells and Control Panels

      OxyGreen Corporation, an engineering technology company producing U.S. patented groundwater remediation products and Enviro-Equipment, Inc, a manufacturer of UL certified control panels and specialized environmental remediation equipment announce today an exclusive agreement for commercial manufacturing of OxyGreen cells and control panels ...


    By Enviro-Equipment, Inc.

  • Univar distributes GE water treatment products

    Univar has signed an agreement with GE Water & Process Technologies to become the company’s official distributor of their water treatment products, starting initially in Italy and Southern Europe, but planned to extend throughout Europe. Univar will be distributing products across five categories: boiler treatment, membrane separation, odour control, dust control and closed loop ...

  • Making nano-scale manufacturing eco-friendly with silk

    Nanolithography — a way of making finely detailed patterns or structures, such as those found in advanced computer microchips, uses toxic and corrosive chemicals. Researchers have now shown that these could be replaced with eco-friendly silk proteins and water, eliminating the need to use and dispose of hazardous chemicals, while achieving similar levels of detail to conventional methods. ...

  • Zorba Proposes Pyrolysis Aid to Indian Manufacturing Industry

    As per the recent news published in the reputed media house ‘The Times Of India’, the country is generating 15,342.46 tonne plastic waste per day. Of these only 9205 tonne waste is recycled per day, but what about 6137 tonnes of plastic waste? By the end of 2013 an extra 1,104,660 tonne of plastic waste will be scattered all over India. This will not only damage the sewage ...


    By Zorba Industries

  • LevelGuard(R) Fluid Control Products Announces New Sump Pump Switch Products

    TouchSensor™ Technologies, a division of Methode Electronics, Inc. (NYSE: MEI), a global developer of custom engineered and application specific products and solutions, announced the introduction of a new and improved LevelGuard® Electronic Sump Pump Switch model with three SKUs. The products target plumbing contractors and homeowners who need to eliminate sump pump switch failure. The new ...


    By Marketwire

  • GE’s Minnetonka Water Technology manufacturing facility receives prestigious Minnesota safety designation

    GE Recognized for Engaging Its Employees to Achieve Safety Excellence Minnesota Occupational Safety and Health Administration Designates GE Minnetonka Plant as Part of the Minnesota STAR Program Commissioner of the Minnesota Department of Labor and Industry Raises a Flag in GE’s Honor at Ceremony Today GE’s ...


    By General Electric

  • New Grundfos product honoured as product of the year in Germany

    It only took the new Grundfos MAGNA3 pump two months on the market to convince German Plus X Awards of its qualities and win several awards. Winner of the High Quality, Functionality and Ecology categories. And chosen as the product of the year in its category. All of this after only two months on the market. The name of the new pump is already ...


    By Grundfos

  • Resource-Friendly Processes and Products

    The measurement systems manufacturer regularly invests in optimum process design. In addition to certification according to ISO 9001-2015 the company was certified according to the ISO 14001 environmental standard this year for the first time. Managing director Marcus Fischer says: „As a provider of measurement systems whose products are mainly used in the fields of water supply, water ...


    By NIVUS GmbH

  • Dynamax, AquaSpy, Capilix Are Top Companies for Water Savings in Food Production

    With world food prices soaring 70% in just ten years, the $4 trillion food and beverage industry, from farm to market shelf, faces enormous pressure to grow capacity for a hungry world in the face of enormous water and environmental risk. With manufacturers hitting practical limits in their water efficiency, the industry is looking farther upstream to control its massive water risk, according to ...


    By Lux Research

  • Waters Corporation and NIBRT partner to bring greater control and predictability to biopharmaceutical processing

    Waters Corporation (WAT:NYSE) and Ireland’s National Institute for Bioprocessing Research and Training (NIBRT) announced today a collaboration that will create the world’s first database for glycan analysis by UltraPerformance Liquid Chromatography (UPLC). Expected to be available in 2011, NIBRT will develop, maintain and license the database while Waters and NIBRT will co-market it ...


    By Waters Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you