materials recycling system News

  • Road Repairs Utilizing 100% Recycled Material

    Phoenix Industries has recently completed a 3 week pilot project demonstrating their model MP300 mobile pot hole repair unit utilizing hot mix produced with 100% recycled asphalt product (RAP). The repairs were performed on the NovaDutra toll road that links the cities of Rio de Janeiro and Sao Paulo. This is one of the busiest highways in Brazil and caries approximately 60 percent of the ...


    By Phoenix Industries, LLC

  • SCA Recycling to open state-of-the-art multi-material recycling facility

    Paper reprocessor SCA Recycling UK is opening a new state-of-the-art £15 million materials recycling facility soon, expanding its operations into the multi-material market. According to SCA Recycling the MRF will be capable of processing paper, plastics, glass, ferrous and non-ferrous metals to produce high quality materials. Cutting edge disc screen technology ...

  • Bollegraaf Recycling Machinery has built largest material recycling facility in UK

    Bollegraaf Recycling Machinery has built for Greenstar the largest co-mingled material recycling facility of the UK in Aldridge. The plant  has been fully operational since April 2008. After the facility for Cardiff County Council, this is the second large facility Bollegraaf has completed in 1.5 year. Since the government of England “buckled” down to the European legislation of waste ...

  • Series MAC/2, Multi-Material Balers for Recyclables

    With just one baler you can treat different types of materials: plastic, paper, biomass and RDF. It is the evolution of the MAC/1 series, which has been representing an important benchmark for the market since 2001. During these 15 years of collaboration with our customers and dealers, we have collected their challenges and suggestions and designed the best technological solutions to meet the new ...


    By Macpresse Europa S.R.L

  • Series MAC/2, Multi-Material Balers for Recyclables

    Our new series of MAC/2 waste balers is multi-material.  With just one baler you can treat different types of materials: plastic, paper, biomass and RDF. It is the evolution of the MAC/1 series, which has been representing an important benchmark for the market since 2001. During these 15 years of collaboration with our customers and dealers, we have collected their ...


    By Macpresse Europa S.R.L

  • Experts discuss the challenges of battery recycling: Battery recyclers adjusting to new material mix

    The battery recycling sector needs to adjust to the increasing volumes of lithium-ion batteries on the market. The number of lithium-ion batteries currently in use is constantly growing, particularly in the fields of electronics and electric mobility. This fact became evident last week in Montreux, Switzerland, where the international battery recycling industry came together at the International ...


    By ICM AG

  • The new QR series: problem-free shredding of recyclable materials

    UNTHA is expanding its product range and is set to launch a new generation of extremely reliable, versatile high-performance single-shaft shredders: the QR series. The product is all about the problem-free shredding of recyclable materials. With the QR series, operators can be sure of avoiding unscheduled downtime. These machines do what they were built for - the reliable shredding of material. ...

  • Aluminium recycling

    Aluminium recycling is one of the most interesting topics at the moment, as aluminium is a highly sought-after raw material, just like steel. If it is processed properly, there is no limit to the reuse of aluminium. Recycled aluminium will not lose its quality through recycling as long as material of the highest possible purity is used. Currently, aluminium is shredded by means of shear balers to ...

  • Radiators Recycling

    Using its experience in the electric cables recycling field, Guidetti Company has created a line for recycling of the radiators coming from cars, household appliances and air/liquid industrial coolers with the capacity ranging from 400 up to 1.200 kg/h. 3 models are available, according to the radiator’s composition that can be made up of: copper/aluminium, copper/aluminium/plastic, ...


    By Guidetti Recycling Systems

  • Magic or recycling?

    Transforming a bottle into a jacket may sound like magic, but it may be easier than you think. A new video from the European Environment Agency (EEA) shows some of the ingenious ways a plastic water bottle can be reused or recycled. There is currently a drive towards a ‘circular economy’ in the European Union. This is an economic system which retains resources, virtually eliminating ...

  • Modern Recycling Factory, Qatar, Chose Eldan Tyre Recycling System

    "Qatar’s Modern Recycling Factory (MRF), based in Mesaieed Industrial City, is now operational. The $41.3m (QAR150.06m) facility was financed and endorsed more than two years ago by Al Khalij Commercial Bank in support of Qatar’s green-technology business sector. At 20,000m2, MRF is one of the largest Greenfield recycling projects in the country. The plant supplied by Danish equipment ...


    By Eldan Recycling A/S

  • Modern Recycling Factory, Qatar, Chose Eldan Tire Recycling System

    "Qatar’s Modern Recycling Factory (MRF), based in Mesaieed Industrial City, is now operational. The $41.3m (QAR150.06m) facility was financed and endorsed more than two years ago by Al Khalij Commercial Bank in support of Qatar’s green-technology business sector. ...


    By Eldan Recycling A/S

  • Information on Tyre Recycling Pyrolysis System Cost

    Moreover the tyre recycling pyrolysis system cost, numerous and other elements are influencing the pyrolysis system for waste tyre cost and you will think of them extensively. Most importantly of all, the high quality. The systems produced ...

  • WRAP report reaffirms recycling is the best end of life option for most materials

    Fresh research regarding the environmental benefits of recycling reaffirms that recycling generally remains the best option for most materials in the UK waste stream. Work undertaken by the Waste & Resources Action Programme reviewed life cycle analyses of additional materials from the previous report carried out in 2006, including food waste, garden waste, textiles and biopolymers. Other ...

  • Defra reveals long-awaited materials recycling facilities (MRF) Code of Practice

    The new Code of Practice will call for all materials recycling facilities (MRFs) over a certain size to measure the quality of their inputs and outputs. The test results will then be made available to businesses buying the recycling material as well as to local councils and others who supply material to the MRFs. ...


    By GPT Waste Management Ltd

  • Loh Recycle - Malaysia Recycling Services

    Established in 2001, Loh Recycle Enterprise is a leading waste collection and recycling company in Malaysia providing waste collection services and supplying a wide range of recyclable materials to worldwide markets.  Renowned for competitive product offerings, premium customer services and professionalism, Loh Recycle has earned a longstanding support and recognition from its customers ...


    By Loh Recycle Collection

  • Eldan Recycling Acquired Redoma Recycling

    As of January 1st 2016, REDOMA Recycling AB is a part of the ELDAN Group, forming the world’s largest manufacturer of cable recycling equipment with 90 years of joint experience. Eldan Recycling has during the last 60 years been active in the field of manufacturing cable recycling equipment. Eldan has sold and installed several thousands of cable recycling lines around the world. The ...


    By Eldan Recycling A/S

  • Critical Materials Institute rare-earth recycling invention licensed to U.S Rare Earths

    A new technology developed by the U.S. Department of Energy’s Critical Materials Institute that aids in the recycling, recovery and extraction of rare earth minerals has been licensed to U.S. Rare Earths, Inc. The membrane solvent extraction system, invented by CMI partners Oak Ridge and Idaho national laboratories, is the first commercially licensed technology developed ...

  • How to future-proof Materials Recycling Facilities (MRFs) design to maximise plant efficiency

    Incorporating ‘future-proof’ design concepts into the layout and operating principles of new Materials Recycling Facilities (MRFs) is vital if managers are to improve quality and maximise profits from their multi-million pound investments, conference delegates heard. Planning for expansion, predicting likely changes in feed composition and installing good management information ...


    By Axion Group

  • Axion Consulting and Zero Waste Scotland report reveals potential for stuffing material recycling

    Local schemes could offer potential recycling solutions for stuffing materials from bedding and furniture as the waste industry shifts its focus to tackling more difficult to recycle waste streams arising in smaller quantities. This comes from a recent report, thought to be the first of its type, published by resource recovery specialist Axion Consulting and Zero Waste Scotland. While there ...


    By Axion Group

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you