metal detector News

  • ASTM C1269 - 97(2012) Standard Practice for Adjusting the Operational Sensitivity Setting of In-Plant Walk-Through Metal Detectors

    Performing this procedure from this practice should result in a properly adjusted walk-through metal detector operating at or near the optimum sensitivity setting for the environment in which it is installed. This practice determines the lowest sensitivity setting required to detect a specified test object and establishes a sensitivity setting suitable for ...


    By ASTM International

  • Spymet metal locator from Eriez Magnetics Europe Ltd

    The SpyMet Metal Locator is the latest new product developed and launched by Eriez Magnetics Europe. SpyMet is an accessory to a metal detector system and is used to track and locate tramp metal on a conveyor belt. It can be operated in two different modes, manual or automatic. Its greatest advantage over conventional rejection/marking devices, which specifically rely on the speed of the conveyor ...


    By Eriez Magnetics Europe Ltd

  • ASTM C1270 - 97(2012) Standard Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors

    A complex set of variables affect metal detection and detection sensitivity. Some physical characteristics of metal objects that influence detection are material composition, shape, surface area, surface and internal electrical and magnetic properties, and finish. The orientation of a test object can greatly influence detection as can the direction and ...


    By ASTM International

  • Eriez Magnetics - PR1006 Eriez launch new and improved accessory for metal detector systems

    The Inkjet Marker MK II is the latest product launch from the Eriez Metal Detector range. The Inkjet Marker MK II is an accessory to a Metal Detector system and is used to mark the location of pieces of detected metal contamination on a conveyor belt. This makes it easier for operators to find and remove the problematic metal before continuing production. The Inkjet Marker is installed after a ...


    By Eriez Magnetics Europe Ltd

  • ASTM C1238 - 97(2012) Standard Guide for Installation of Walk-Through Metal Detectors

    This guide is intended for use by the designers, evaluators, and users of walk-through metal detectors to be installed to screen persons entering or leaving a controlled access area. This guide is not meant to constrain design liberty but is to be used as a guide in the selection of location and installation of walk-through metal detectors. 1. Scope ...


    By ASTM International

  • The Masters Of Detection

    Master Magnets Ltd has now acquired Metal Detection Ltd, one of the leading suppliers of metal detectors in the UK and abroad. The acquisition represents a strategic enhancement of Master Magnets existing range of separation and sortation equipment. The metal detectors will be beneficial to a wide range of industries, such as recycling, mining, food, bulk handling and more. The metal ...


    By Bunting - Redditch

  • New Multi-frequency Metal Detector Integrates onto Checkweigher Frame to Reduce Footprint

    A new scanning multi-frequency metal detector is designed to enable food manufacturers and food quality managers to improve productivity and maximize factory floor space by combining the benefits of multiscan metal detection technology with accurate weight control. The  ...

  • Eriez Showcase Metal Removal and Detection Technology at Bauma 2013

    Eriez Magnetics Europe Ltd are exhibiting the latest technology in metal removal, detection and sampling equipment at Bauma to be held in Munich, Germany between 15th–21st April 2013. On their eye catching stand Eriez will display a working TP Permanent Suspended (Overband) Magnet and a Metal Detector which are capable of solving the industries problem of unwanted metal that damages ...


    By Eriez Magnetics Europe Ltd

  • Eriez Display Magnetic Processing Equipment at Powtech 2013

    Eriez Magnetics Europe Ltd have announced their presence at Powtech in the Exhibition Centre Nuremberg, Germany from 23-25th April 2013 in hall 4, stand 421. Eriez’ experienced technical team will be on hand to discuss how Eriez Magnetic Separators, Metal Detectors and Vibratory equipment can help enhance and develop existing and new process lines in many industries including chemical, ...


    By Eriez Magnetics Europe Ltd

  • Eriez Enhanced Platform for the Xtremee Metal Detector is Helping Dairy Processors Exceed Metal Inspection Standards and Improve Productivity

    The Eriez Enhanced Platform for the Xtreme* Metal Detector is enablrtg dairy processors to boost productivity and meet rigid food safety guidelines set forth by the United States Department of Agriculture (USDA) and Food and Drug Administration (FDA). Eriez' Enhanced Platform drastically improves metal sensitivity by up to 300 percent while reducing false trips, even in traditionally challenging ...


    By Eriez Magnetics Europe Ltd

  • Master Magnets launch new website

    At Master Magnets, we have recently launched a new website for our sister company Metal Detection Ltd. Since 2005, when we acquired Metal Detection Ltd, the company has grown to become one of the UKs biggest manufacturers and suppliers of industrial Metal Detectors. As part of the continued growth of Metal Detection Ltd, a new website has been designed to showcase the wide range of products ...


    By Bunting - Redditch

  • Eriez explodes onto Atex scene

    Eriez Europe has launched Atex rated Permanent Suspended Magnets and Metalarm Metal Detectors suitable for operation in some explosion risk or hazardous environments. This development expands the product range, providing companies with solutions for metal contamination problems in the most arduous of environments. In 1996 new European regulations were introduced for equipment used in ...


    By Eriez Magnetics Europe Ltd

  • New Higher Specification Metal Detector for Quarries

    An innovative type of Metal Detector is having a global launch at the 2007 Hillhead International Quarrying and Recycling exhibition.  The revolutionary Metalarm MA3600 uses pulse induction technology that offers balanced coil detection sensitivity and performance; resulting in a high specification Metal Detector ideally suited for installation in quarries, mines and other arduous locations. ...


    By Eriez Magnetics Europe Ltd

  • Eriez magnetics - PR1019 Eriez introduce new equipment at RWM and IFAT 2010

    Optimum separation is a key stage in all applications. Eriez has designed and developed an extensive range of separators utilising magnetic principles, and at RWM, UK (stand 1410, Hall 17) and IFAT, Germany (Stand 500, Hall B3) in September 2010, Eriez will be launching 3 new systems for non ferrous and ferrous metal recovery. On the exhibition stands at both RWM and IFAT, Eriez will be ...


    By Eriez Magnetics Europe Ltd

  • New Metal Detector Enhances Foreign Object Identification for Food Processors and Personal Care Manufacturers for Improved Safety and Operational Efficiency

    Detection of foreign objects such as metals is a high priority for food processors, especially when in 2019 alone the United States Department of Agriculture  ...

  • Eriez Presents New Overband Magnet at Hillhead 2014

    Eriez Magnetics Europe Ltd, leading authority in separation technologies presents its brand-new suspended permanent magnet, the CPRE at the Hillhead Quarrying, Construction and Recycling Tradeshow. This international show, in a working quarry, is held at Hillhead Quarry, Buxton between the 24th and 26th of June 2014. Eriez’ new Rare Earth Permanent Overband Magnet provides an alternative ...


    By Eriez Magnetics Europe Ltd

  • New European Sales Office for Bunting

    A focus on developing business on the European mainland has led to Bunting opening a new sales office for Central and Northern Europe in Vienna, Austria.  The office is managed by new Sales Manager Christopher Gabriel. Christopher Gabriel outside Bunting’s facility in Berkhamsted, UK. “The appointment of Christopher further enhances our local presence in Europe,” explained ...


    By Bunting - Redditch

  • Over 10 years at RWM for Eriez Europe

    Eriez Magnetics is recognised as world authority in separation technologies, manufacturing magnetic separators and metal detectors in 12 international facilities on six continents, with the European Headquarters based in Caerphilly, South Wales, UK. For over the last decade, RWM has been a platform for Eriez to launch and showcase the most pioneering solutions for metal separation and ...


    By Eriez Magnetics Europe Ltd

  • Maximal exploitation of Eddy Current Separator

    It separates non-ferrous metals from various type of recyclable material, but separation purity depends first of all on machine’s magnetic power, which is transformed to eddy current. Higher magnetic power - higher separation purity. Not all Eddy Current Separators have the same separation results as various manufacturers achieves different magnetic power with their engineering solutions. ...


    By Cogelme S.r.l.

  • Eriez achieves re-certification of ISO 9001:2008 quality standard

    Customer satisfaction is high on the agenda at Eriez Magnetics Europe Ltd. This drive to meet customer needs led Eriez Europe to ensure re-certification of ISO 9001:2008 standard for its quality management system. Eriez undertook three full days of external audits by DNV where by all processes and departments within the business were looked into in great detail. During the audit it was found that ...


    By Eriez Magnetics Europe Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you