metal detector News
-
ASTM C1269 - 97(2012) Standard Practice for Adjusting the Operational Sensitivity Setting of In-Plant Walk-Through Metal Detectors
Performing this procedure from this practice should result in a properly adjusted walk-through metal detector operating at or near the optimum sensitivity setting for the environment in which it is installed. This practice determines the lowest sensitivity setting required to detect a specified test object and establishes a sensitivity setting suitable for ...
-
ASTM C1238 - 97(2012) Standard Guide for Installation of Walk-Through Metal Detectors
This guide is intended for use by the designers, evaluators, and users of walk-through metal detectors to be installed to screen persons entering or leaving a controlled access area. This guide is not meant to constrain design liberty but is to be used as a guide in the selection of location and installation of walk-through metal detectors. 1. Scope 1.1 Some ...
-
The Masters Of Detection
Master Magnets Ltd has now acquired Metal Detection Ltd, one of the leading suppliers of metal detectors in the UK and abroad. The acquisition represents a strategic enhancement of Master Magnets existing range of separation and sortation equipment. The metal detectors will be beneficial to a wide range of industries, such as recycling, mining, food, bulk handling and more. The metal ...
-
ASTM C1270 - 97(2012) Standard Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors
A complex set of variables affect metal detection and detection sensitivity. Some physical characteristics of metal objects that influence detection are material composition, shape, surface area, surface and internal electrical and magnetic properties, and finish. The orientation of a test object can greatly influence detection as can the direction and ...
-
Spymet metal locator from Eriez Magnetics Europe Ltd
The SpyMet Metal Locator is the latest new product developed and launched by Eriez Magnetics Europe. SpyMet is an accessory to a metal detector system and is used to track and locate tramp metal on a conveyor belt. It can be operated in two different modes, manual or automatic. Its greatest advantage over conventional rejection/marking devices, which specifically rely on the speed of the conveyor ...
-
Eriez Magnetics - PR1006 Eriez launch new and improved accessory for metal detector systems
The Inkjet Marker MK II is the latest product launch from the Eriez Metal Detector range. The Inkjet Marker MK II is an accessory to a Metal Detector system and is used to mark the location of pieces of detected metal contamination on a conveyor belt. This makes it easier for operators to find and remove the problematic metal before continuing production. The Inkjet Marker is installed after a ...
-
New Multi-frequency Metal Detector Integrates onto Checkweigher Frame to Reduce Footprint
A new scanning multi-frequency metal detector is designed to enable food manufacturers and food quality managers to improve productivity and maximize factory floor space by combining the benefits of multiscan metal detection technology with accurate weight control. The Thermo Scientific Sentinel 3000 multiscan metal detector is the smallest model in the line of Sentinel metal detectors and ...
-
Eriez Enhanced Platform for the Xtremee Metal Detector is Helping Dairy Processors Exceed Metal Inspection Standards and Improve Productivity
The Eriez Enhanced Platform for the Xtreme* Metal Detector is enablrtg dairy processors to boost productivity and meet rigid food safety guidelines set forth by the United States Department of Agriculture (USDA) and Food and Drug Administration (FDA). Eriez' Enhanced Platform drastically improves metal sensitivity by up to 300 percent while reducing false trips, even in traditionally challenging ...
-
Master Magnets launch new website
At Master Magnets, we have recently launched a new website for our sister company Metal Detection Ltd. Since 2005, when we acquired Metal Detection Ltd, the company has grown to become one of the UKs biggest manufacturers and suppliers of industrial Metal Detectors. As part of the continued growth of Metal Detection Ltd, a new website has been designed to showcase the wide range of products that ...
-
Eriez Showcase Metal Removal and Detection Technology at Bauma 2013
Eriez Magnetics Europe Ltd are exhibiting the latest technology in metal removal, detection and sampling equipment at Bauma to be held in Munich, Germany between 15th–21st April 2013. On their eye catching stand Eriez will display a working TP Permanent Suspended (Overband) Magnet and a Metal Detector which are capable of solving the industries problem of unwanted metal that damages ...
-
Eriez-Australia Opens Perth Sales and Service Centre
Magnetics specialist Eriez has opened its newest sales office in Western Australia, replacing its long-time sales representative organisation Western Process Equipment (WPE) with an Eriez-owned and operated sales and service centre. WPE served Eriez customers in Perth for more than five decades, offering an extensive line of Eriez equipment, most notably in the mining and minerals processing ...
-
New Higher Specification Metal Detector for Quarries
An innovative type of Metal Detector is having a global launch at the 2007 Hillhead International Quarrying and Recycling exhibition. The revolutionary Metalarm MA3600 uses pulse induction technology that offers balanced coil detection sensitivity and performance; resulting in a high specification Metal Detector ideally suited for installation in quarries, mines and other arduous locations. The ...
-
Eriez explodes onto Atex scene
Eriez Europe has launched Atex rated Permanent Suspended Magnets and Metalarm Metal Detectors suitable for operation in some explosion risk or hazardous environments. This development expands the product range, providing companies with solutions for metal contamination problems in the most arduous of environments. In 1996 new European regulations were introduced for equipment used in ...
-
Eriez Display Magnetic Processing Equipment at Powtech 2013
Eriez Magnetics Europe Ltd have announced their presence at Powtech in the Exhibition Centre Nuremberg, Germany from 23-25th April 2013 in hall 4, stand 421. Eriez’ experienced technical team will be on hand to discuss how Eriez Magnetic Separators, Metal Detectors and Vibratory equipment can help enhance and develop existing and new process lines in many industries including chemical, ...
-
Eriez Separate, Detect and Sample at Bauma 2010
Eriez Magnetics Europe Ltd are exhibiting the latest technology in metal removal, detection and sampling equipment at Bauma to be held in Munich, Germany between 19th – 25th April 2010. This is Eriez’ first appearance at the show where they will be showcasing their products on both an outside and inside stand. Eriez can be found in Hall C2 Stand 418A and Yard C1-C2 Stand 435. Overband ...
-
Bunting Extends Its Range with a Shredder Feeder Conveyor
Although not directly aimed at the tyre recycling sector the new shredder feeder conveyor from Bunting might be of interest to recyclers who have issues with metal contamination, or who are also recycling alternate waste streams on site. The new shredder feeder conveyor from Bunting-Redditch combines with either a magnetic separator or metal detector to protect a shredder or granulator from metal ...
-
New Metal Detector Enhances Foreign Object Identification for Food Processors and Personal Care Manufacturers for Improved Safety and Operational Efficiency
Detection of foreign objects such as metals is a high priority for food processors, especially when in 2019 alone the United States Department of Agriculture reported that 17 million pounds of food were impacted by recalls due to "extraneous material." The Thermo Scientific Sentinel 1000 Selectscan Metal Detector system features two technologies intended to help food and personal care ...
-
EHEDG Membership for Bunting
Bunting has joined the European Hygienic Engineering & Design Group (EHEDG) following a rise in magnetic separator and metal detector projects for the food, pharmaceutical and chemical industries. The European Hygienic Engineering & Design Group (EHEDG) was founded in 1989 as a non-profit consortium of equipment manufacturers, food producers, suppliers to the food industry, research ...
-
New Export Opportunities at Bauma 2019
Throughout the whole 7 days, the Master Magnets and Bunting Magnetics stand at Bauma 2019 buzzed with visitors. Mineral separation demonstrations on the Rare Earth Roll Magnetic Separator ignited curiosity and stimulated questions. The new ElectroMax Overband Magnet, proudly displayed at the front of the stand, drew visitors and the media. There was particular interest in the heavy duty, ...
-
Eriez Presents New Overband Magnet at Hillhead 2014
Eriez Magnetics Europe Ltd, leading authority in separation technologies presents its brand-new suspended permanent magnet, the CPRE at the Hillhead Quarrying, Construction and Recycling Tradeshow. This international show, in a working quarry, is held at Hillhead Quarry, Buxton between the 24th and 26th of June 2014. Eriez’ new Rare Earth Permanent Overband Magnet provides an alternative ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you