metal fractions separator News

  • TITECH solutions for quality fractions in organics, metals and wire recovery at EcoCity 2009

    The recovery of high quality end fractions from a range of waste streams is showcased by TITECH at this year’s EcoCity exhibition.  TITECH, widely recognised as the industry leader in sensor-based sorting solutions, is unveiling new configurations of its systems that have been designed to provide effective solutions to common problems encountered in a number of market applications. These ...


    By TOMRA Sorting (TITECH)

  • Bottom ash Mobile Non Ferrous Metals Separation Machine

    RNS Engineering proudly presents her New Generation high capacity Mobile (for picture see our Website). Non-Ferrous Metals Separation Machine. •The New Mobile Non-Ferrous Metals Separation Machine is designed to separate Non-Ferrous metals from various waste fractions (e.g. bottom-ash ex waste incineration plants) •This machine combines the treatment of two different sizes of fractions by ...


  • Three-stage magnetic separator removes all metals from waste streams

    Goudsmit has recently designed and produced a compact unit that combines a conventional magnetic separator, high-gradient separator and non-ferrous separator. This three-stage separator removes normal iron parts, followed by weakly magnetic metal parts (including a large variety of stainless steels), and finally non-ferrous metal parts. This all takes place over a distance of approximately 7 ...


    By Goudsmit Magnetic Systems BV

  • Three-stage magnetic separator removes all metals from waste streams

    Goudsmit has recently designed and produced a compact unit that combines a conventional magnetic separator, high-gradient separator and non-ferrous separator. This three-stage separator removes normal iron parts, followed by weakly magnetic metal parts (including a large variety of stainless steels), and finally non-ferrous metal parts. This all takes place over a distance of approximately 7 ...

  • Metal Separation in the Processing of Secondary Fuels - the Extraction of Potential Recycables and Equipment Protection

    The treatment of solid domestic and commercial refuse and the extraction of secondary fuels from these materials will be subject to stricter regulations due to new landfill regulations coming into force. In this way, it will be possible to further increase the recycling quotas and minimize bottlenecks in processing capacity. There are grounds for believing that the competition between ...

  • Magnetic system separates three types of metal at the same time - three-stage magnetic separator removes all metals from waste streams

    Goudsmit has recently designed and produced a compact unit that combines a conventional magnetic separator, high-gradient separator and non-ferrous separator. This three-stage separator removes normal iron parts, followed by weakly magnetic metal parts (including a large variety of stainless steels), and finally non-ferrous metal parts. This all takes place over a distance of approximately 7 ...


    By Goudsmit Magnetic Systems BV

  • Three Eddy current separators deliver maximum return - domestic waste clinkers are metal free

    The recently initiated project cooperation between Goudsmit Magnetic Systems B.V. of Waalre and Feniks Recycling BV of Hengelo delivers a maximum return to end processor Twence Afvalverwerking B.V. of Hengelo. Expansion of the existing line with three Eddy current separators ensure a maximum yield of recycled metals from domestic waste clinkers. The separators remove large, medium as well as very ...


    By Goudsmit Magnetic Systems BV

  • Non-ferrous separator for recycled wood

    The recently initiated project cooperation between Goudsmit Magnetic Systems B.V. in Waalre and Van Bemmel Machine Import B.V. in IJsselstein with Hector van Moer in Melsele/Beveren in Belgium, ensures that all non-ferrous metals located in the wood chips are completely removed from the processed B-wood fraction. It involves mainly shredded aluminium components but also non-ferrous metals such as ...

  • Domestic waste clinkers are metal free

    The recently initiated project cooperation between Goudsmit Magnetic Systems B.V. of Waalre and Feniks Recycling BV of Hengelo delivers a maximum return to end processor Twence Afvalverwerking B.V. of Hengelo. Expansion of the existing line with three Eddy current separators ensure a maximum yield of recycled metals from domestic waste clinkers. The separators remove large, medium as well as very ...

  • Environment Agency to confirm separate collection legislation in UK

    As set out under the Waste (England and Wales) Regulations, the Environment Agency is concluding a briefing note to stakeholders which will outline how it is likely to oversee the separate collection of recyclable materials as of this month. Under the new regulations which came into effect on the 1st of January 2015, the separate collections of paper, metal, plastic and glass for household and ...


    By GPT Waste Management Ltd

  • MeWa QZ cleans mixed metal and plastic waste

    A feature of medium-sized businesses in Germany is their ability to continually identify new niches and successfully service them. GRUNSKE Metall - Recycling GmbH & Co. KG of Oranienburg recently commissioned a new plant for cleaning metals that have already run through sorting systems for domestic and industrial waste. Using a Querstromzerspaner supplied by MeWa, the company is able to ...


    By ANDRITZ MeWa GmbH

  • MeWa QZ cleans mixed metal and plastic waste

    A feature of medium-sized businesses in Germany is their ability to continually identify new niches and successfully service them. GRUNSKE Metall - Recycling GmbH & Co. KG of Oranienburg recently commissioned a new plant for cleaning metals that have already run through sorting systems for domestic and industrial waste. Using a Querstromzerspaner supplied by MeWa, the company is able to ...


    By ANDRITZ MeWa GmbH

  • Eriez introduces the New Shred1 Ballistic Metal Sorter to Scrap Processors

    Eriez Magnetics Europe Ltd introduces their new Shred1™ Separator which uses ballistics to efficiently separate iron-rich ferrous from much of the mixed metals and waste material in the post Magnetic Drum flow in scrap processing lines. This powerful and innovative separator delivers three distinct fractions with the first being a high value, low-copper content ferrous product. This ...


    By Eriez Magnetics Europe Ltd

  • Increasingly stricter quality requirements for suppliers - non-ferrous separator for recycled wood

    The recently initiated project cooperation between Goudsmit Magnetic Systems B.V. in Waalre and Van Bemmel Machine Import B.V. in IJsselstein with Hector van Moer in Melsele/Beveren in Belgium, ensures that all non-ferrous metals located in the wood chips are completely removed from the processed B-wood fraction.  It involves mainly shredded aluminium components but also non-ferrous metals ...


    By Goudsmit Magnetic Systems BV

  • ARN Invests in Further Expansion with Swiss Delamination and Separation Plant

    ARN Recycling BV is the first company to operate the new CCM20RT delamination mill produced by swissRTec.  The CCM20RT is based around the same design as its predecessors, the CCM10 and CCM15RT, however it makes a big step forward in power and size. ARN, an experienced processor of ASR in the Netherlands, is ...


    By Auto Recycling Nederland

  • Ecopark 4 trusts TOMRA AUTOSORT for the Efficient Automation of its Separation Processes

    Ecopark 4, located in Hostalets de Pierola (Barcelona), is a mechanical-biological treatment (MBT) plant with a treatment capacity of up to 300,000 tons a year of municipal waste. Ecopark 4, managed by Ferrovial Servicios, is one of the waste treatment and management plants in the Barcelona Metropolitan Area, a supra-municipal public authority competent in the urban waste management of the 36 ...


    By TOMRA Sorting (TITECH)

  • TOMRA Sorting showcases metal sorting systems at CMRA Annual Convention, China

    With China’s need for ultra-efficient metal waste sorting growing rapidly, TOMRA Sorting exhibited its latest automated sorting systems at the China Nonferrous Metals Industry Association (CMRA) Annual Convention. Held in Guangzhou from November 7-9, the convention is the country’s leading expo for the conservation and re-use of metals. TOMRA Sorting showcased its latest ...


    By TOMRA Sorting (TITECH)

  • Eriez to launch new dual frequency separator at RWM 2015

    Eriez Europe to showcase latest developments in recycling separation equipment with new Eddy Current Separator (ECS) design at RWM 2015 on September 15th to 17th, at the NEC in Birmingham, UK. The new NG-24 ECS is suitable for multiple applications and features a new cantilevered design, which allows for the ECS belt to be changed in as little as 10 minutes by maintenance staff. Eriez Europe will ...


    By Eriez Magnetics Europe Ltd

  • REDWAVE XRF - new sorting possibilities for the Metal and Aluminium Recycling Industry

    The sorting system REDWAVE XRF was initially used in the field of glass sorting, more precisely for the separation of heat-resistant and leaded glass from the waste glass cullet. Soon it became apparent that the fields of application go far beyond the glass sector. The use of this innovative technology together with the development of a new machine design set new standards in the metal sorting, ...

  • ASTM B214 - 07(2011) standard test method for sieve analysis of metal powders

    The particle size distribution of a metal powder affects its behavior in P/M processing and other applications of these materials. The test method may be part of the purchase agreement between powder supplier and user, or it may be an internal quality control test for either. 1. Scope 1.1 This test method covers the dry sieve analysis of metal ...


    By ASTM International

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you