methane detector News

  • New Methane Only FID for methane/non-methane measurement

    Signal have developed a new, lost cost flame ionisation detector with a catalyst to measure methane. This can be used for methane measurement or with a conventional FID to provide a non-methane reading. This model utilises a catalyst that is highly specific to methane. It is supplied ready calibrated to optimum balance between allowing methane through and oxidising all higher fractions. ...


    By Signal Group Ltd

  • TDL-500 with Archer GPS finds methane leaks fast

    Finding gas leaks or proving none exist has just become much easier. With a continuous log of GPS position and methane (CH4) analysis proving zero ppm or showing leak readings from just 1ppm to 100%, Geotech has provided an easy-to-use leak detector. With almost-instant response from the Geotech ...


    By Geotech

  • Jubilee bonfire beacon, but no explosion, thanks to methane leak check

    Villagers in Brightwell Baldwin in Oxfordshire celebrated the Queen's Diamond Jubilee in style, lighting a hilltop bonfire as one of the nationwide chain of 4000 beacons being lit simultaneously. But the organiser had a background in the gas industry, so he was nervous about lighting a fire above an old landfill site. Leigh Greenham, who has been involved in the gas detection business for many ...


    By Geotech

  • New landfill gas detector from Photovac

    Photovac, Inc., the manufacturer of premium instruments for volatile organic compound analysis in air, soil, and groundwater, is pleased to introduce the MicroFID flame ionization detector for landfill gas detection.The measurement of methane and non-methane components in landfill gas is essential for compliance with air quality operating permit requirements, and the MicroFID detector from ...


  • Quasar 900 Open Path Gas Detector

    The SafEye Quasar 900 Open Path Gas Detector is a high performance, high reliability gas detector, providing continuous monitoring for combustible hydrocarbon gases such as methane, propane, ethylene, butane, etc. Encased in a rugged, stainless steel, ATEX and IECEx approved housing, the Quasar 900 is able to detect at distances of up to 660ft (200m) in the harshest of environments. ...


    By Spectrex Inc

  • Crowcon’s new LaserMethane mini Gen2 detects methane leaks from up to 100 metres away in seconds

    Crowcon Detection Instruments has launched its new LaserMethane mini Gen2 (LMm) portable methane detector. Designed specifically to detect methane at distance of up to 100 metres in seconds, the ATEX approved, second generation LMm is changing the way methane leaks are detected. What used to be a time consuming and potentially hazardous procedure is now quick and easy. The LMm is very easy to ...

  • Crowcon’s gas-pro confined space gas detector at offshore Europe in Aberdeen

    Crowcon will be showing its new Gas-Pro confined space entry gas detector at the Offshore Europe show in Aberdeen between 6-8 September. The Gas-Pro has a number of special features that make it ideal for confined space use, including a top-mount display, an internal pump, five gas capability and Positive Safety™ (tri-colour status indicator). Crowcon will also be showing other new ...

  • Crowcon’s gas-pro confined space gas detector at A+A 2011 in Düsseldorf

    Crowcon will be showing its new Gas-Pro confined space entry gas detector at A+A 2011 in Düsseldorf between October 18-21. The Gas-Pro has a number of special features that make it ideal for confined space use, including a top-mount display, an internal pump, five gas capability and a tri-colour status indicator. Crowcon will also be showing other new products, including its IRmax infrared ...

  • Crowcon launches Gas-Tec Hydrocarbon Gas Detector for Leak Survey and Localisation

    Crowcon’s new Gas-Tec portable hydrocarbon gas detector is designed for rapid leak survey and localisation in applications such as gas distribution networks and landfill sites. Using Crowcon’s tried and tested flame ionisation chamber, the Gas-Tec also features next generation technology such as GPS, data and event logging. The new device allows survey teams to track progress and quickly pinpoint ...

  • Crowcon’s Gas-Pro Confined Space Gas detector at A+A 2011 in Düsseldorf

    Crowcon will be showing its new Gas-Pro confined space entry gas detector at A+A 2011 in Düsseldorf between October 18-21. The Gas-Pro has a number of special features that make it ideal for confined space use, including a top-mount display, an internal pump, five gas capability and a tri-colour status indicator. Crowcon will also be showing other new products, including its IRmax infrared ...

  • Combustible gas detector provides rapid 3-Second response to Dangerous Leaks

    The advanced Model IR400 Point IR Combustible Gas Detector from General Monitors features an industry-leading three-second T90 response time to the presence of combustible hydrocarbon-based gases, which allows plant operators to respond quickly to gas leaks and avoid potential accidents. With its fast three-second response time, the Model IR400 Infrared Gas Detector provides an added margin of ...


    By General Monitors

  • HART® communication protocol ensures reliable communication with Crowcon’s IRmax gas detector

    Easy and reliable connection and communication is vital when using a gas detector, which is why Crowcon has introduced the HART Communication Protocol for its IRmax infrared (IR) hydrocarbon detector. The HART (Highway Addressable Remote Transducer) Communication Protocol is the global standard for sending and receiving digital information across analog wires between smart devices and control or ...

  • Crowcon’s IRmax infrared hydrocarbon gas detector certified to SIL 2

    Crowcon’s IRmax infrared hydrocarbon gas detector has been certified to SIL 2 by Sira Test and Certification Ltd according to the requirements of the IEC 61508 and EN50402 ...

  • Pellistor replacement IR flammable gas detector from Crowcon

    Crowcon’s innovative new IREX infrared (IR) flammable gas detector is designed to replace pellistor (catalytic bead) type flammable gas detectors, resulting in faster response times and greatly reduced zero drift. Capable of detecting methane, butane, propane and many other hydrocarbons, IREX is specifically designed for the oil, gas and petrochemical industries. Pellistor and some other IR type ...

  • Baseline® Releases Flame Ionization Detector (FID) for 9100 Series GC

    Baseline® a MOCON® company announces the addition of a flame ionization detector (FID) in the 9100 Series On-Line Gas Chromatograph. As one of the more sensitive and stable detectors, the FID expands the available application base for the Series 9100 GC to include fast C1 to C5, C6 and up, methane, methanol and ethanol, acrylonitrile and many more. The FID detector provides the best ...


    By AMETEK MOCON - Baseline

  • New confined space entry gas detector from Crowcon at Health & Safety Expo 2011

    Gas detection specialist Crowcon is showing its new portable Gas-Pro confined space entry (CSE) gas detector at the Health and Safety Expo in Birmingham this May. Specifically designed for CSE work, the Gas-Pro has application-driven features that include a top-mount display, internal pump, detection of up to five gases simultaneously, and +ve Safety – an innovative, tri-colour status ...

  • Senscient ELDS(TM) Version 1.2 Open Path Gas Detectors Are First With Wireless 2.4 GHz Access and Data Communications

    An industry first, Senscient's new ELDS Version 1.2 Open Path Gas Detectors (OPGDs) feature Integrated 2.4 GHz Wireless Communications between the ELDS Transmitters/Receivers and Senscient Install & Commissioning tools. No other OPGD is as easy to install, with 2.4 GHz wireless alignment & access to event logs, self check results, and system diagnostics. This eliminates hard-wired Class I ...


    By Senscient Inc

  • NH3 / CH4 detection for biogas injection into the natural gas grid

    Simultaneous detection of two gases increases efficiency while decreasing costs. A single, compact device can accomplish this. Axetris Laser Gas Detectors are capable of measuring ammonia and methane for biogas injection into the natural gas grid. Biogas is a modern energy source independent of the limited supply of fossil fuels. Its production can be adapted to current demand and is, unlike ...


    By Axetris Ag

  • enitial chooses TDL-500 for emissions monitoring

    As one of the UK's leading independent providers of emission and pollution monitoring, control and management services, enitial required a portable methane detector that would be efficient at recording and storing very detailed data. Following an increasing demand for emissions mapping surveys to be carried out from their customers, particularly those concerned ...


    By Geotech

  • Laser gas detection success for Anglian Water Services

    Anglian Water Services (AWS) wanted to quantify methane emissions from their wastewater treatment processes. As these are less well understood and less well defined than indirect carbon emissions associated with electricity use, they set up a project to locate and quantify emissions from the processes at a wastewater treatment works. This was led by the in-house Innovation Team which undertakes ...


    By Geotech

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you