Multi-Elemental Analysis News on Environmental XPRT

Rapid Multi-Element Analysis at a Low Price? No Problem with HR-CS AAS!

Does your multi-element analysis with AAS take too long? Are the operating costs of your ICP too high? Analytik Jena has the solution: High-Resolution Continuum Source AAS (HR-CS AAS) with the contrAA! Thanks to a Xenon lamp as radiation source every wavelength of every element is ...

Mar. 24, 2014

By Analytik Jena AG

Analytik Jena AG: Simultaneous Multi-Element Analysis with High Resolution Continuum Source AAS (HR-CS AAS)

Analytik Jena once more expands the range of applications of the revolutionary contrAA product series: Now the simultaneous analysis of several absorption lines in the measured spectral range is also possible. This offers great benefits especially in the relatively time-consuming graphite furnace technology, because several elements can be detected simultaneously using a single atomization. One ...

Sep. 26, 2013

By Analytik Jena AG

contrAA – Fast Multi-Element Analysis within a 5-Orders Dynamic Measurement Range

Fast and reliable multi-element analysis in most diverse matrices and simple handling are prerequisite for efficient applications in routine and research. With its unique technology but typical AAS-handling, ...

Jan. 6, 2017

By Analytik Jena AG

Analytik Jena AG: Reliable Elemental Analysis of Refinery Samples - multi EA 5000

For rapid and precise determination of liquids and gases, particularly in the trace range, the use of vertical systems has become standard. With the increase in complexity and viscosity of samples, however, it is necessary to use the horizontal mode. The ...

Aug. 29, 2014

By Analytik Jena AG

Elemental analysis – anywhere, anytime, anyplace

A transportable version of the Teledyne Leeman Labs Prodigy ICP Spectrometer has been developed to enable high quality laboratory analysis in the field. Explaining the potential for this equipment, Quantitech's Dr Gareth Pearson says: 'Land remediation activities often depend on the availability of fast, accurate test data because, in addition to regulatory requirements, analytical results can ...

Mar. 3, 2010

By Quantitech Ltd

Application Note MFD: Elemental Analysis

High-performance elemental analysis using Axetris MFCs. Repeatable gas flow control enables ultra-trace C-H-N-S-O analysis. Elemental Analysis (EA) techniques are becoming increasingly important, with a variety of applications in environmental, food and chemical industries. Gas flow control that is repeatable across a wide dynamic range is a prerequisite for high-performance ultra-trace ...

Jan. 24, 2017

By Axetris Ag

Elemental Analysis - Automation Without Limits

Fully automated carbon, sulfur, chlorine, and nitrogen analysis in liquid and solid samples is possible! Thanks to the multi-matrix sampler you have the security of being able to meet the most varied analytical challenges in next to no time with one single system - the multi EA 5000. Its intelligent construction facilitates the highest sample throughput ever in organic elemental analysis. Liquids ...

Oct. 18, 2012

By Analytik Jena AG

Application Note MFD: Elemental Analysis

High-performance elemental analysis using Axetris MFCs. Repeatable gas flow control enables ultra-trace C-H-N-S-O analysis. Elemental Analysis (EA) techniques are becoming increasingly important, with a variety of applications in environmental, food and chemical industries. Gas flow control that is repeatable across a wide dynamic range is a prerequisite for high-performance ultra-trace ...

Jan. 24, 2017

By Axetris Ag

Multi-Directional 3D Stability Analysis

One of the early feature requests received by SoilVision Systems Ltd. pertaining to the 3D SVSlope limit equilibrium slope stability package was the ability to analyze a slope at any particular sliding direction. Limit equilibrium 3D solutions in the past have been restricted to only solving problems at a single sliding direction, which is ...

Jun. 27, 2013

Phase2 8.0 - advanced finite element analysis for excavations and slopes

Rocscience is pleased to announce the release of Phase2 version 8.0, an advanced finite element analysis program for underground or surface excavations in rock or soil. Phase2 is used for a wide range of geotechnical engineering projects including stress analysis, slope stability, support design and groundwater seepage. Typical applications include tunnel design, soil and rock slope stability, ...

Apr. 20, 2011

By Rocscience Inc.

New Certified reference material for trace element analysis in grass released

JRC-IRMM has released a new certified matrix reference material for element analysis in animal feed (ERM-CD281, rye Grass). Animal feed quality has a significant impact on the quality of the food products derived from animals and thus on human health and is one of work areas of the EU legislation, e.g. Regulation (EC) No 1881/2006, Directive 2001/22/EC and Directive 2002/32/EC. There are several ...

Jun. 2, 2010

By European Commission, JRC, Directorate F - Health, Consumers and Reference Materials

Oxford Instruments’ new X-Strata980 for analysis of trace elements and coating thickness

The new X-Strata980 X-ray fluorescence analyzer combines a high-power X-ray tube and high resolution detector to measure small areas of complex samples and deliver limits of detection in single digit ppms. Detecting hazardous elements in small amounts assures the production of environmentally friendly product and avoids costly product recall or enforcement of regulatory legislation. The ...

Aug. 21, 2008

By Oxford Instruments plc

ERM-CC144: a New reference material to support element analysis in sewage sludge

JRC-Geel has released a new sewage sludge reference material (ERM®-CC144), certified for the mass fraction of the total and aqua regia extractable content of As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb and Zn. This material can help laboratories to assess the impact of sewage sludge application on farmland. ...

Dec. 5, 2016

By European Commission, JRC, Directorate F - Health, Consumers and Reference Materials

Truly Nondestructive Portable Analysis Tool for Light Element Content in Alloy Material

Untitled Document August 2006, Billerica, MA Thermo Electron Corporation’s NITON Analyzers business unit, the worldwide leader in nondestructive alloy analysis instrumentation ...

Aug. 16, 2006

By Thermo Scientific Niton Analyzers

Analytik Jena AG: Profitable Elemental Analysis in Shift Work Labs

In elemental analysis, especially in routine labs with shift work, the quality of results strongly depends on the operator's qualification. Time-consuming operator trainings, stringent safety, system checks, and frequent preventive maintenance are required. For more efficient work, this unpredictable factor must be eliminated. The Self Check System (SCS) of multi EA® 5000 is an intelligent ...

May 29, 2013

By Analytik Jena AG

Olympus Introduces the DELTA Element, a Handheld XRF Analyzer for Cost-Effective Alloy Identification and Elemental Analysis

Olympus is pleased to announce the release of its newest and most affordable handheld X-ray fluorescence (XRF) analyzer that is optimized for scrap metal sorting, positive material identification (PMI), alloy QA/QC, and precious metals analysis. Powerful, yet simple, the DELTA Element was designed for budget-conscience customers who desire the accuracy, speed, precision, simplicity and ruggedness ...

Sep. 4, 2014

By Olympus

New, modular system for multi-method analysis on a single platform

Quality control in many industries depends on the routine analysis of a handful of key parameters. Often, determination of these parameters is distributed across several technologies and methods. This goes along with cumbersome aggregation of results and management of data from different sources. With the launch of the new, modular OMNIS platform for comprehensive wet chemical ...

Jun. 7, 2016

By Metrohm AG

Water analysis of small samples

Water analysis specialists Camlab has introduced a water analyser that can measure up to nine parameters in a single sample that can be collected in a standard 50ml falcon tube. The Camlab analyser is manufactured by Mantech, which develops automated multi-parameter analysers. The analyser can test potable, surface and ground waters for ...

Sep. 2, 2011

By Filtration + Separation - Elsevier Ltd

Power Plants and SWOT Analysis

The report contains the profile of the company that is involved in the field of power generation from thermal sources (coal, oil and gas). It contains a detailed description of the companys business operations (power plants, installed capacity, and generation), history, corporate strategy, and business structure. This report contains a detailed SWOT analysis, information on key employees ...

Jul. 10, 2013

Hexavalent Chromium Analysis

Produced by many industrial processes, Cr(VI) is the (+6) valence state of the element chromium. It is known to cause cancer, and also targets the respiratory system, kidneys, liver, skin and eyes. Chromium in steel alloys is a major source of worker Cr(VI) exposure during "hot work " like welding, especially on stainless steel. Common Cr(VI) compound uses include ...

Oct. 11, 2016

By Analytics Corporation

Subscribe to our eBulletins

Add Supplier Profile