multigas calibrator News

  • Latest multigas FTIR analysers can be hired

    FTIR gas analysers have become popular in a wide variety of gas detection and monitoring applications because of their ability to measure almost any gas. However, the cost of this equipment can exceed the budgets of those that could benefit from this sophisticated technology, so Quantitech has established a small range of FTIR gas analysers that are available for hire. Typical applications for ...


    By Quantitech Ltd

  • Humidity calibration in non-air gases at above-atmospheric pressures

    Many laboratories can only perform humidity calibrations in air at atmospheric pressure. However, industrial humidity measurements may be at high pressures, or in other gases. For best validity, humidity calibrations should ideally be in the gas medium of use, because the performance of some hygrometers can depend on gas species and pressure. Calibration ...

  • MKS` MGS300 CEMS achieves TÜV certification

    MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced TÜV certification for the MGS300 CEMS for stationary emission sources such as incinerators, power plants and cement kilns. A continuous emissions monitoring system, the MGS300 with a core MultiGas™ 2030 FTIR spectrometer provides real-time ...


    By MKS Instruments, Inc.

  • What are the Seven Deadly Sins of Gas Detection? Find out from Crowcon at the A+A trade fair!

    What are the Seven Deadly Sins of Gas Detection? If you want to know you should get down to Crowcon’s booth (6J24) at the A+A Trade Fair and Congress in Düsseldorf this November. Not only can you learn about the Sins, you can also see Crowcon’s new range of gas detection technology which includes Gas-Pro, the multigas portable monitor ideally suited for confined space work. This ...

  • Visit Shawcity on stand 4 at health and Safety Edinburgh 2011

    Health and Safety Edinburgh 7-8 September 2011  Stand 4   If you’re a Health and Safety professional in need of a monitoring solution, you can’t afford to miss out on visiting Shawcity at this year’s Health and Safety event in Edinburgh ...


    By Shawcity Limited

  • PID HIRE

    Shawcity hire the following instruments:   Single gas monitors Multigas monitors PIDs and VOC detectors ...


    By Shawcity Limited

  • Protea Heated Gas Sampling System

    For heated gas sampling from up to 4 separate sample points, Protea’s Heated Stream Selection Module (HSSM) is a ready to use 19" rack interface that can be used with Protea’s range of multigas FTIR analysers or any other industrial gas instrumentation.  The standard HSSM includes a bank of 4 heated solenoid valves with 1 common outlet, allowing each of the sample ...


    By Protea Limited

  • Health and Safety Edinburgh 7-8 september 2011

    Health and Safety Edinburgh 7-8 September 2011 Stand 4 If you’re a Health and Safety professional in need of a monitoring solution, you can’t afford to miss out on visiting Shawcity at this year’s Health and Safety event in Edinburgh on the 7th and 8th September. Shawcity cater for a variety of markets including health and safety, occupational ...


    By Shawcity Limited

  • Promotion for RAE Systems QRAE II Multi-Gas Detector

    Promotion for RAE Systems QRAE II Multi-Gas Detector Diffusion or Pump for O2, LEL/Combustibles, H2S & CO.   One Complimentary Calibration + Inspection per instrument If returned within six(6) months from the date of purchase. Calibration Certificates are issued with every new and serviced ...


    By CitiSafe Pte Ltd

  • Innovation drives flue gas treatment

    Sharing a common goal, experts in emissions monitoring and emissions abatement have formed a working partnership to develop innovative new materials for treating pollutants in flue gas emissions. A business strategy with a heavy focus on innovation has enabled Lhoist, a family owned Belgian company, to become one of the world’s leading providers of Flue Gas ...


    By Gasmet Technologies Oy

  • Crowcon`s Triple Plus+ portable gas detector more versatile than ever

    Crowcon has added more features to its Triple Plus+ portable gas detector, making it even more versatile than ever. Favoured by the construction and oil and gas industries because of its toughness, and with around 100,000 units in use worldwide, the Triple Plus+ is arguably the world's most popular full function multi-gas gas detector. The device, which can monitor up to four toxic and ...

  • Tough, Small And Lightweight Personal Multi-Gas Monitor For Harsh Environments

    Extending the family of Tetra portable gas monitors, the lightweight Tetra:3 from Crowcon Detection Instruments combines extremely rugged design with small size and simple operation. Designed for use in demanding industrial environments, including confined space work in the construction industry, the Tetra:3 has simple, single button operation which can be used with a gloved hand. Monitoring ...

  • AQE 2015 to focus on ways to improve air quality and emissions monitoring

    AQE 2015 to focus on ways to improve air quality and emissions monitoring The organisers of AQE 2015, the international Air Quality and Emissions show, have announced a comprehensive programme of events that will take place in Telford, UK, on 22nd and 23rd April. Created to provide an update on the latest regulations, technologies, methods and research in air quality and emissions monitoring, AQE ...


    By Quantitech Ltd

  • SIR develops a NEW SERIES for Ambient Air Gas Analyzers

    SIR S.A., Madrid, Spain – SIR, an environmental monitoring instrumentation manufacturer, announced today that it is implementing state of the art distributed technologies as the basis for a new series of ambient air gas analyzers. By adapting advanced mobility technologies, SIR will be able to provide a rich and friendly working environment (color touch screen) together with maximized ...


    By CERTIO MEDIO AMBIENTE, S.L.

  • T3 portable multi-gas detector

    Gas detection specialist Crowcon has expanded the capabilities of its highly successful Tetra:3 (T3) personal multi-gas detector with three more toxic gas sensors: ozone (O3), sulphur dioxide (SO2) and ammonia (NH3). This complements the existing sensor range which includes flammable gases, oxygen (O2), hydrogen sulphide (H2S), and carbon monoxide (CO). The new sensors widen the scope of the T3 ...

  • Crowcon Expands Capabilities of its Lightweight, Intrinsically Safe T3 Portable Multi-Gas Detector

    Gas detection specialist Crowcon has expanded the capabilities of its highly successful Tetra:3 (T3) personal multi-gas detector with three more toxic gas sensors: ozone (O3), sulphur dioxide (SO2) and ammonia (NH3). This complements the existing sensor range which includes flammable gases, oxygen (O2), hydrogen sulphide (H2S), and carbon monoxide (CO). The new sensors widen the applications for ...

  • Thermo Fisher Scientific introduces the Thermo Scientific Model 60i Full-Extractive

    Thermo Fisher Scientific Inc., the world leader in serving science, today announced the new Thermo Scientific Model 60i, a full-extractive, multi-gas analyzer that features non-dispersive infrared (NDIR) optical filter technology to ensure accurate, precise measurement of up to six gases, including CO, CO2, NO, NO2, and SO2. The Model 60i also accommodates an optional O2 measurement capability ...

  • a1-cbiss Introduce Peracetic Acid Monitor

    ChemDAQ's Steri-Trac detector provides the optimal solution for workplace safety assurance from Peracetic Acid. What is Peracetic Acid? As an extremely strong oxidiser widely used for its disinfectant properties, it is essential to provide ...


    By a1-cbiss

  • Crowcon’s T3 Gas Tester Ensures Compliance

    The new T3 Gas Tester ensures Crowcon’s Tetra:3 (T3) portable, multi-gas detector complies with relevant national/regional safety regulations and individual company requirements. The device feeds the T3’s sensors a known concentration of gas, a process known as ‘bumping’, to ensure the sensors are working correctly. The way it works is simple: when a T3 is inserted into ...

  • Quantitech instruments chosen for new multi-agency air quality unit

    Environmental instrumentation company Quantitech has been awarded a contract worth in excess of £1million to provide advanced air sampling and analysis equipment to the multi-agency air quality cell that has been established following the recommendations of the Major Incident Investigation Board for the Buncefield incident. Quantitech has supplied 18 sets of instrumentation including advanced ...


    By Quantitech Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you