multigas ftir News

  • Certification boosts demand for FTIR multigas analyser

    Quantitech has experienced a surge in demand for the Gasmet portable FTIR emissions analyser, the DX4000. “We believe that this instrument is now the only portable FTIR with MCERTS certification, and this is driving demand for both instrument rental and sales,” says Dominic Duggan. The Gasmet DX4000 portable FTIR gas analyser is typically used in stack emissions monitoring, comparison ...


    By Quantitech Ltd

  • Latest multigas FTIR analysers can be hired

    FTIR gas analysers have become popular in a wide variety of gas detection and monitoring applications because of their ability to measure almost any gas. However, the cost of this equipment can exceed the budgets of those that could benefit from this sophisticated technology, so Quantitech has established a small range of FTIR gas analysers that are available for hire. Typical applications for ...


    By Quantitech Ltd

  • New White Paper on FTIR multigas analysis

    Gasmet Technologies (Finland) has announced the publication of a free White Paper on the simultaneous measurement of multiple gases in a wide variety of applications using FTIR (Fourier Transform InfraRed) technology. With the ability to measure almost any gas, FTIR monitoring technology is employed in an enormous variety of applications including Continuous Emissions Monitoring, Stack ...


    By Gasmet Technologies Oy

  • New White Paper & Video on FTIR multigas analysis

    Gasmet Technologies has published a free White Paper and a video on the simultaneous measurement of multiple gases in a wide variety of applications using FTIR. Both the video and the White Paper can be found at www.gasmet.com or by visiting the Quantitech stand 62/63 at AQE 2017. With the ability to measure ...


    By Gasmet Technologies Oy

  • 20 year old FTIR gas analyzer finally retires

    After almost 20 years of reliable service a Gasmet FTIR multigas analyzer has finally been retired. The instrument, which is a Gasmet 9540 was purchased at the end of the last century by VTT, the Technical Research Centre of Finland. “We have utilised this analyzer in a variety of research projects over the years and it has performed extremely well. However, some of the spare parts are no ...


    By Gasmet Technologies Oy

  • Advanced Multigas FTIR for R&D, Hospital , CEM’s, R&D

    ETG PROTEA is a high resolution, compact FTIR analyser packaged in a 19” rack mountable case. This FTIR uses the latest in interferometer technology to provide a compact and high performance instrument. With a high resolution (1cm-1), atmosFIR is ideal for gas identification and speciation. It has an in-built “sampling system” – inlet filter, purge valve, cell temperature ...

  • The Highest Levels Of Performance & Accuracy In Multigas Analysis

    Measure any gas, in any background, with our range of analysers for research, process and emissions. With 20 years’ experience in FTIR gas analyser application and manufacture, Protea can provide the complete gas analysis solution. atmosFIR New Range of high resolution multigas FTIR 19 inch rack or portable versions, for fixed, mobile and integration. PotIR 204M MCERTS approved ...


    By Protea Limited

  • Multigas analyser supports liquid fuel research

    Two advanced FTIR analysers are being employed to monitor multiple gas concentrations simultaneously in laboratory scale reactors at Sasol’s Research and Technology Centre in South Africa. The monitors, which were supplied by Gasmet Technologies (Finland), are being used to study changes in gas composition during the preparation of Fisher Tropsch catalysts which are used in gas-to-liquids ...


    By Gasmet Technologies Oy

  • FTIR analyser reveals surprising solution

    Emissions analysers have to be checked annually by certified testers and during recent functionality tests for a Gasmet FTIR continuous emissions monitor (CEM) at a UK Energy from Waste plant, the Nitrogen Dioxide span check results were found to be incorrect. A subsequent investigation revealed surprising results that would not have been apparent had the plant been using traditional CEMs. NO2 ...


    By Quantitech Ltd

  • Protea Advanced FTIR Analyser Training Course

    Protea will be running an Advanced Analysis course for user of FTIR gas analysers for process and emissions measurements on 11th-12th October 2016. The PDF offered our latest support documentation for our valued partners and users of Protea's range of FTIR gas analysers. Please contact us for more information. For more information please download the PDF below. We are delighted to offer you the ...


    By Protea Limited

  • Gas analysis workshop focuses on FTIR versatility

    Gasmet Technologies, the manufacturer of FTIR gas analyzers, organised a meeting in Lisbon, immediately prior to the CEM 2016 conference and exhibition in May, to provide delegates with an insight into the wide variety of applications for which FTIR technology is employed. The measurement of greenhouse gases (GHGs) was a particular focus for the event, with presentations from a number ...


    By Gasmet Technologies Oy

  • FTIR stars in Air Quality & Emissions Show

    Visitors to AQE 2015 in Telford (22-23 April), were treated to a practical demonstration of real-time simultaneous multigas analysis when Quantitech’s Dominic Duggan enlisted the help of three attendees to assist in the demonstration of the Gasmet portable FTIR gas analyser, the DX4040. Seeking to explode the myth that FTIR gas analysis is complicated, Dominic encouraged participants to ...


    By Quantitech Ltd

  • New portable FTIR gas analyser available for hire

    The new Gasmet DX4040 portable FTIR multi-gas analyser is now available for hire from Quantitech Limited. For each rental Quantitech’s Dr Hobson configures the instrument to meet the customer’s specific gas monitoring needs. He says: "The DX4040 has brought laboratory grade gas analysis into the field and the availability of a rental system means that even those with a limited budget ...


    By Quantitech Ltd

  • Cerex Introduces the New AirSentry FTIR Open Path Analyzer

    Cerex Monitoring Solutions is pleased to announce the release of the third generation model AirSentry FTIR multi-gas open path FTIR analyzer. The decision was made to fully redesign the analyzer to take full advantage of advances in hardware and software technology. The third generation design represents a full reconfiguration of the instrument. Goals were to reduce initial and operating costs ...

  • Gasmet Technologies And Cems Experts Sign Distribution Agreement For The US West Ftir Cems Market

    CEMS Experts, a California based systems integrator for Continuous Emissions Monitoring Systems (CEMS) has entered into a distribution agreement with Gasmet Technologies, a Finnish based technology company focused on advanced FTIR gas analyzers and monitoring systems.  The CEMS Experts team will apply their extensive knowledge and experience marketing the Gasmet™ line of FTIR gas ...

  • Toxic gas analysis - new video, white paper and case study

    Dangerous levels of toxic gases in freight containers represent a major threat to port and transport workers, customs officials, warehousemen, store employees and consumers. However, the risks posed by these gases can be effectively assessed with Gasmet FTIR multigas analysers. Gasmet has therefore published a video, a white paper and a case study; providing comprehensive help and advice for any ...


    By Gasmet Technologies Oy

  • MKS` MGS300 CEMS achieves TÜV certification

    MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced TÜV certification for the MGS300 CEMS for stationary emission sources such as incinerators, power plants and cement kilns. A continuous emissions monitoring system, the MGS300 with a core MultiGas™ 2030 FTIR spectrometer provides real-time ...


    By MKS Instruments, Inc.

  • Protea Heated Gas Sampling System

    For heated gas sampling from up to 4 separate sample points, Protea’s Heated Stream Selection Module (HSSM) is a ready to use 19" rack interface that can be used with Protea’s range of multigas FTIR analysers or any other industrial gas instrumentation.  The standard HSSM includes a bank of 4 heated solenoid valves with 1 common outlet, allowing each of the sample ...


    By Protea Limited

  • New integrated continuous emissions monitoring capability

    Quantitech has a long-standing reputation for the supply and service of high quality environmental monitoring instruments in the UK. However, following acquisition by Gasmet Technologies, the company has invested in the resources necessary to design, deliver, install and commission complete integrated emissions monitoring systems, and a video has been published on the Quantitech website ...


    By Quantitech Ltd

  • Thermo Fisher Scientific introduces their new Multi-Gas analyzer for continuous gas monitoring

    Thermo Fisher Scientific Inc., the world leader in serving science, has announced the Thermo Scientific Model 70 FTIR Multi-Gas CEMS, a single analyzer, continuous monitoring system capable of measuring up to ten gases or more for almost any incineration or co-incineration application. The new Thermo Scientific real-time monitoring system employs the most widely used, field-proven, process FTIR ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you