NDIR gas detection News

  • Reducing Warm Up Time of NDIR Gas Sensors

    MEMS-based electrically-efficient infrared sources from Axetris — In a number of gas detection applications, a short warm-up time of the gas sensor is critical. Especially for applications where discrete measurements need to be made, and where the gas sensor is not continuously switched on, a short warm-up time is absolutely essential. This is the case for portable gas detection devices, ...


    By Axetris Ag

  • Designing drift-free and reliable NDIR gas sensors using modulated infrared sources

    Axetris IR sources are based on the proprietary thin film technology from Axetris, and deliver exceptional performance when electrically modulated in the 5-100 Hz range. This feature can help NDIR gas sensor designers achieve drift-free operation, combined with increased reliability and lifetime. Here we present qualitative conclusions (see table) based on multiple years of internal performance ...


    By Axetris Ag

  • Edinburgh Sensors develop cutting edge gas detection solutions

    At Edinburgh Sensors, we pride ourselves in being one of the leading manufacturers of robust NDIR gas detection solutions. The application of our continued research and development has contributed to several major advances in the world of infrared gas sensing which has allowed us to develop our comprehensive portfolio of NDIR products for the detection of CO, CO2 and CH4. ...


    By Edinburgh Sensors Ltd

  • TOC Analysis at the highest level - focus radiation NDIR!

    The best TOC analyzer isn't worth its money, if detection problems have to be faced. For this reason Analytik Jena has introduced the unique new corrosion-resistant Focus Radiation NDIR detector for its multi N/C series, which ensures reliable results and high stability. ...


    By Analytik Jena AG

  • Sky high – Fast detection of total organic carbon peak loads

    Normally, production facilities have low waste water discharge levels, mostly within the range of 1,000 ppm TOC (total organic carbon). However, occasionally the installation can suffer failures or process disturbances take place. In this case, the range could very well reach a level of up to 50,000 ppm. If these go ...


    By LAR Process Analysers AG

  • CAI Introduces New Landfill Gas Systems

    ORANGE, CA - The California Analytical Instruments Landfill Gas Analysis System provides a highly accurate Methane and Oxygen analyzer housed in a NEMA 4 or 4X enclosure.  The enclosure is climate controlled for outdoor mounting and provides maximum stability in virtually any environment. The enclosure includes fittings for calibration gases, sample gas, and exhaust as well as solenoid ...

  • Carbon dioxide detection in industrial plants: Measuring range 0 – 5,00 % or 0 – 2,00 %

    For martians – provided they are existing – carbon dioxide atmosphere might be their natural habitat. We earthlings can only tolerate low concentrations of this gas. It is true that we are using the special properties of CO2 for many purposes, but in concentrations above 5000 ppm it can be hazardous to our health. Therefore it must be monitored. In areas that are rarely accessed such ...

  • CO2 Gas Sensor tailored to customer needs

    We were recently delighted to help one of our customers in the field of Modified Atmosphere Packaging (MAF) who was in need of a bespoke CO2 gas sensor solution. He was seeking a gas sensor with a rapid response, low lag, and low noise output. Following consultation, we were able to develop the New 0-100% ...


    By Edinburgh Sensors Ltd

  • Edinburgh Sensors New Chillcard NG Range for CO and CO2 Gas Measurement

    The Chillcard NG range of NDIR gas sensors from Edinburgh Sensors has been extended to include two new gases; namely carbon monoxide (CO) and carbon dioxide (CO2). Our standard sensors for these gases use a miniature lamp with a tungsten filament as the source of infrared light. However, in applications such as endothermic gas annealing furnaces and gasification, where high levels of hydrogen ...


    By Edinburgh Sensors Ltd

  • Using an Infrared Sensor (IR Sensor) for Reliable Methane Gas Monitoring

    This article explains why an infrared sensor (IR sensor) is the preferred option for methane detection, as methane detectors are essential for monitoring safety and efficiency in a wide range of applications. Gas detectors that ...


    By Edinburgh Sensors Ltd

  • Frost & Sullivan Recognizes Precisive for Its Innovative Gas Monitoring Platform

    Based on its recent analysis of the sensors and analytical instruments market, Frost & Sullivan recognizes Precisive, LLC (Precisive) with the 2012 Global Frost & Sullivan New Product Innovation Award for developing an all-optical hydrocarbon composition analyzer in the form of a unique tunable filter spectrometer (TFS) design for on-line, real-time gas analysis. End users in the sensors ...


    By Frost & Sullivan

  • DirectSense® II User Configurable, Multi-Parameter IAQ and Toxic Gas Probes

    Building on 20 years of customer feedback, the all-new range of DirectSense II smart probes are being introduced by GrayWolf. These cutting-edge air monitoring probes accommodate from two (2) up to eight (8) plug-and-play smart sensors into a single hand-held, desktop or wall-mounted housing. Choose from 25 different indoor air quality, green building, industrial hygiene and HVAC parameters ...


    By GrayWolf Sensing Solutions

  • Edinburgh Sensors Continue to Commit to Customer Safety and Convenience

    Edinburgh Sensors was founded in 1988 and from then we have committed ourselves to developing gas sensing technology and equipment to the highest levels for all our customers. Since the 1940s Non-dispersive Infrared (NDIR) sensing has become an important, safe, reliable and accurate method for the detection of gases such as CO, CO2, ...


    By Edinburgh Sensors Ltd

  • E Instruments Announces E8500 Plus Has Just Been Upgraded

    With great pride and excitement, we here at E Instruments are pleased to announce that our E8500 Plus has just been upgraded to measure up to 50% CO2 using an NDIR sensor. The E8500 Plus is already one of our most powerful, portable, and advanced emissions analyzer available on the market today. In fact, when you pick up the E8500 Plus, you cannot help ...

  • Professional Solutions for the Global Energy Market at CIGRE 2018

    LumaSense Technologies, Inc. provides an innovative  suite of temperature and gas sensing products designed to allow customers to continuously monitor substations, Load Tap Changers (LTCs) and transformers. These products provide early warnings for countermeasures to reduce failures and serious damages. As the global demand for energy increases, energy generators and providers need asset ...


    By LumaSense Technologies, Inc.

  • E Instruments Announces E8500 Plus Has Just Been Upgraded

    With great pride and excitement, we here at E Instruments are pleased to announce that our E8500 Plus has just been upgraded to measure up to 50% CO2 using an NDIR sensor. The E8500 Plus is already one of our most powerful, portable, and advanced emissions analyzer available on the market today. In fact, when you ...

  • NEW ZERO AIR GENERATOR PRODUCT MEETS GOVERNMENT REQUIREMENTS

    ORANGE, CA (September 01, 2010) - California Analytical Instruments, Inc. is pleased to announce that recent laboratory test results have confirmed that our latest Zero Air Generator (ZAG) product line meets all requirements of 40 CFR, Part 1065 for output gas purity.  At our corporate headquarters, extensive analysis has been conducted on this product utilizing extremely sensitive gas ...

  • Lumasense’s newest online DGA monitor provides early warning diagnostics to prevent transformer failures

    LumaSense Technologies, Inc. released SmartDGA Guard, the latest offering in the company’s new line of dissolved-gas analysis (DGA) monitors designed to help electric utilities improve grid reliability by diagnosing transformer faults before they lead to serious incidents. Featuring the line’s signature modular shape that enables faster installation and the industry’s ...


    By LumaSense Technologies, Inc.

  • Senscient Inc. Attracts Lime Rock Partners and Closes Series C Financing

    Senscient, Inc. announced today that the company has secured a significant investment to support the global deployment of it multi-gas detection system. The technology detects combustible and toxic gases and significantly increases the level of safety at industrial sites. Lime Rock Partners, a global energy-focused private equity firm, led the Series C investment round and was joined by existing ...


    By Senscient Inc

  • Monitoring methane emissions from agriculture and dairy farming

    Methane (CH4) is the second most prevalent greenhouse gas emitted from human activities. In 2014, CH4 was responsible for around 11 percent of all US greenhouse gas emissions caused by human actions. Methane is emitted by a range of natural sources such as marshlands, leakage from natural gas systems and livestock farming [1]. Domestic ...


    By Edinburgh Sensors Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you