non-ferrous metal separator News

  • ASTM F1178 - 11 standard specification for performance of enameling system, baking, metal joiner work and furniture

    This specification covers performance of enameling system and baking primer on metal joiner work and furniture. Specification includes procedures for cleaning, degreasing, enameling, and texturing. Performance criteria shall include test panel ...


    By ASTM International

  • ASTM B214 - 07(2011) standard test method for sieve analysis of metal powders

    The particle size distribution of a metal powder affects its behavior in P/M processing and other applications of these materials. The test method may be part of the purchase agreement between powder supplier and user, or it may be an internal quality control test for either. 1. Scope 1.1 This test method covers the dry sieve analysis of metal ...


    By ASTM International

  • ASTM F1044 - 05(2011)e1 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings

    The shear test method is recommended for shear testing of calcium phosphate and metallic/substrate combinations and can provide information on the adhesive or cohesive strength of coatings under a uniaxial shear stress. The test method may be useful for comparative evaluation of adhesive or cohesive strengths of a variety of types of coatings. Information developed using this test method may be ...


    By ASTM International

  • ASTM E8 / E8M - 11 Standard Test Methods for Tension Testing of Metallic Materials

    Tension tests provide information on the strength and ductility of materials under uniaxial tensile stresses. This information may be useful in comparisons of materials, alloy development, quality control, and design under certain circumstances. The results of tension tests of specimens machined to standardized dimensions from selected portions ...


    By ASTM International

  • Larson Electronics releases a 1000 Watt Metal Halide Light Fixture with External Ballast

    Larson Electronics announces the release of a 1,000 watt metal halide light fixture equipped with external ballast. Constructed of die cast aluminum and U.L. listed for marine use, this fixture includes a remote ballast within a NEMA enclosure. The ...


    By Larson Electronics LLC

  • Welcome to a new world of non-contact temperature measurement

    The SPOT R100 thermometer uniquely combines five different operating modes, including ratio setting, two single wavelengths, a multi-mode setting and duo setting. Ratio setting mode was specifically designed for metal heat treatment applications that require high-accuracy temperature measurement as a vital component of overall process control and product quality The versatile ...


    By AMETEK Land

  • ASTM A928 / A928M - 11 standard specification for ferritic/austenitic (Duplex) stainless steel pipe electric fusion welded with addition of filler metal

    This specification covers standard requirements for ferritic/austenitic (duplex) stainless steel pipe that is electric fusion welded with addition of filler metal suitable for corrosive service. Heat treatment shall be performed after welding and in accordance with specified temperature and quench conditions. Several grades of ferritic/austenitic steel shall ...


    By ASTM International

  • ASTM E2208 - 02(2010)e1 standard guide for evaluating non-contacting optical strain measurement systems

    This guide assists potential users in understanding the issues related to the accuracy of non-contacting strain measurement systems and to provide a common framework for quantitative comparison of optical systems. The output from a non-contacting optical strain and deformation measurement system is generally divided into optical data and ...


    By ASTM International

  • Eriez Showcase recycling equipment at REW, Turkey

    Eriez Magnetics Europe Ltd have designed and developed an extensive range of separators utilising magnetic principles, and at REW in Turkey between 8th and 11th June 2011 (stand A-11), Eriez will be showcasing their latest systems for ferrous and non ferrous metal recovery. At REW, Eriez will be showcasing their new RevX-ETM Eddy Current Separator which is the first Eddy Current Separator from ...


    By Eriez Magnetics Europe Ltd

  • Over 10 years at RWM for Eriez Europe

    Eriez Magnetics is recognised as world authority in separation technologies, manufacturing magnetic separators and metal detectors in 12 international facilities on six continents, with the European Headquarters based in Caerphilly, South Wales, UK. For over the last decade, RWM has been a platform for Eriez to launch and showcase the most pioneering solutions for metal separation and ...


    By Eriez Magnetics Europe Ltd

  • Eriez Magnetics Europe strengthen recycling connections in 2015

    Eriez Europe attended the Recycling Technik 2015 exhibition in Dortmund, Germany on the 4th & 5th of November to further develop their recycling connections across the continent. Eriez’ attendance at multiple recycling exhibitions this year strengthens their worldwide presence and ongoing success in the recycling industry. As the cost of sending material to landfill continues to ...


    By Eriez Magnetics Europe Ltd

  • Aluminium and copper balls made of highly sensitive data

    Today, these data are recorded digitally on computers, hard drives, digital recordings, floppy disks, USB flash drives, etc. When they have been used, they are often just thrown away. However the sensitive data that may be located on it could be reproduced at any time again. Only the destruction of the storage media can prevent this. Erdwich has developed a machine technology that simultaneously ...

  • Black Powder: A Pipeline and Processing Problem

    Magnetic separator technology designed to be a solution for black powder removalA ferrous contaminant created by internal erosion and corrosion of carbon steel pipelines and operating equipment, black powder, causes many operational problems. Black powder which ranges from 100 + microns to sub-micron sizes, with the majority being ferrous (on average 80%) and silica (20%) causes many costly ...


    By One Eye Industries Inc.

  • Obtain 100% valorized material and 0% for landfill from your recycled waste

    The customer, recycling municipal waste, before installing Sortech recycling plant, was paying 100 Eur/t for screened matrials deposing into the landfill. Once the customer installed Sortech engineered plant, he successfully obtained purely separated, thus valuable material: lightweight – paper, foils, light plastic (known as RDF) heavyweight ...


    By Sortech S.r.l.s.

  • Black Powder: A pipeline and processing problem

    A ferrous contaminant created by internal erosion and corrosion of carbon steel pipelines and operating equipment, black powder, causes many operational problems. Black powder which ranges from 100 + microns to sub-micron sizes, with the majority being ferrous (on average 80%) and silica (20%) causes many costly problems for the pipeline and processing industries. Problems such as: degrading of ...


  • Black Powder: A pipeline and processing problem

    A ferrous contaminant created by internal erosion and corrosion of carbon steel pipelines and operating equipment, black powder, causes many operational problems. Black powder which ranges from 100 + microns to sub-micron sizes, with the majority being ferrous (on average 80%) and silica (20%) causes many costly problems for the pipeline and processing industries. Problems such as: degrading of ...


  • Eriez magnetics - PR1019 Eriez introduce new equipment at RWM and IFAT 2010

    Optimum separation is a key stage in all applications. Eriez has designed and developed an extensive range of separators utilising magnetic principles, and at RWM, UK (stand 1410, Hall 17) and IFAT, Germany (Stand 500, Hall B3) in September 2010, Eriez will be launching 3 new systems for non ferrous and ferrous metal recovery. On the exhibition stands at both RWM and IFAT, Eriez will be ...


    By Eriez Magnetics Europe Ltd

  • Master Magnets maximise ECOs’ wood chip profits

    Major UK composting company ECO Sustainable Solutions recently contacted Master Magnets Ltd with a metal contamination problem, which if solved, would significantly increase the value of their wood chip.ECOs’ wood chip is supplied for many different uses including playgrounds, pathways, gardens and parks. It is for this reason that the 50mm wood chip is required to be a completely metal-free end ...


    By Master Magnets Ltd

  • Mitsubishi strengthens cooperation with Steinert for the Japanese market

    About ten years ago Steinert concluded a partnership agreement for its patented eccentric pole system for non-ferrous metal separators with Mitsubishi. The agreement calls for Mitsubishi to use the tried and tested eccentric pole system in the Japanese market. Due to the positive experiences with the system and the desire to form a closer partnership, the heads of the companies met with the ...

  • Master Magnets win the Kiverco contract

    Master Magnets recently won the contract to supply Kiverco Recycling Systems Ltd with all of their Magnetic Separation Equipment. Kiverco are one of the leading European manufacturers of waste recycling systems and frequently require magnetic separation equipment such as Eddy Current Separators and Overband Magnets with their recycling plants. These Magnets are used to separate the ferrous and ...


    By Master Magnets Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you