non-nuclear density meter News

  • Suspended Solids Density Meter: Maintain Your Concentration!

    Markland's Meter offers real-time knowledge of sludge/silt concentrations in pipes, tanks & clarifiers, and automates sludge removal. Its non-intrusive, ultrasonic sensor provides continuous %SS readings of primary, secondary, return-activated and backwash sludge, allowing users to program underflow pumps to shut off before sludge density becomes too thin, and helping operators optimize ...

  • For Vortex Flow Meters, Accuracy Matters in Steam Energy Flow Measurement

    The heat is on. Most facilities managers are in the hot seat to account for all of the flow energy, going in and out of their facility which is no easy task. This mandate is no different for steam flow measurement. Vortex flow meters continue to be the industry standard for accurate steam flow measurement. Despite this fact, there is a common debate about vortex mass flow meters versus ...


    By Sierra Instruments, Inc.

  • Introducing our new InnovaSonic 207i Ultrasonic Liquid Flow Meter

    For Liquid Flow Metering, Optimized for Thermal Energy/ BTU Sierra is proud to announce the new InnovaSonic 207i ultrasonic liquid flow meter with thermal energy/BTU capability.  Designed, built and calibrated by Sierra in Monterey, California for non-intrusive liquid flow metering, and optimized for thermal energy/BTU measurement, the 207i transit-time ultrasonic flow ...


    By Sierra Instruments, Inc.

  • Streamlined Sensor makes ultra mag flow meter lighter for simple installation and economy

    With a breakthrough streamlined sensor design, the new Ultra Mag® Flow Meter from McCrometer delivers highly accurate liquid measurement in a more compact, lighter and yet rugged package that simplifies installation while offering low maintenance and long life at an economical cost to set a new industry standard for value.The advanced Ultra Mag Flow Meter is a non-invasive, no-moving parts ...


    By McCrometer, Inc.

  • Lufft introduces new stationary, non-invasive road weather sensor for smart traffic applications

    With the now available non-invasive, stationary road weather sensor StaRWIS we continued the evolution of spectroscopic sensors consequently. It is based on the award-winning technology of the mobile weather sensor MARWIS which was launched in end of 2014. The new road sensor can be mounted at heights of 5.5 meters above the ground and is a less-expensive alternative to NIRS31-UMB - the first ...

  • REDmeters Launches The Mining RM3

    REDmeters, an Orlando Florida based company, is launching their RM3, a density meter that is said to blow all competition out of the tailing pond. This is new for a Mining Industry that has been struggling to make ends meet in its spiraling market. Non-Nuclear The company prides the RM3 as a non-nuclear density ...


    By REDmeters

  • REDmeters Launches The Dredging RM2

    REDmeters just released the new RM2, a non-nuclear in-line density meter that can be mounted on any dredging vessel. This is new for the dredging world, that has been struggling to justify contractual pricing with performance. As a result, contractual negotiations today, are mostly based on estimated time to complete the project, not on the work itself. Non-Nuclear ...


    By REDmeters

  • New Liquid Ultrasonic Flowmeter has Apps and is Optimized for Thermal Energy/BTU Measurement

    Sierra Instruments is proud to introduce its new InnovaSonic® 207i transit-time ultrasonic liquid flow meter with thermal energy/BTU capability for superior flow measurement.  Designed, built and calibrated by Sierra in Monterey, California, for non-intrusive liquid flow metering, and optimized for thermal energy/BTU measurement, the  ...


    By Sierra Instruments, Inc.

  • Elster to Showcase Innovative Solutions at H2O XPO 2011

     Elster (NYSE: ELT) announced today that several advanced metering solutions will be highlighted at the National Rural Water Association's 2011 H2O XPO, taking place October 4 – 6, 2011, at the Kentucky ...


    By Elster Group

  • ASTM B214 - 07(2011) standard test method for sieve analysis of metal powders

    The particle size distribution of a metal powder affects its behavior in P/M processing and other applications of these materials. The test method may be part of the purchase agreement between powder supplier and user, or it may be an internal quality control test for either. 1. Scope 1.1 This test method covers the dry sieve analysis of metal ...


    By ASTM International

  • China launches air pollution battle plan

    The Chinese government has announced a multi-pronged plan to tackle the country's air pollution. Faced with increasing public concern China will cut coal use, shut down polluters and promote cleaner production in a bid to clean up the air under the plan. The government aims to cut the density of particulate matter by at least 10 percent in major cities nationwide by 2017. PM 2.5, a key indicator ...


    By GLOBE SERIES

  • Beijing issues rare air pollution alert

    When the air gets really bad, Beijing says it has an emergency plan to yank half the city's cars off the road. The only problem is: It may be difficult to ever set that plan in motion. It wasn't triggered in January, when the city recorded extremely poisonous air pollution. And not last week, when pollution was expected to continue for several days at hazardous levels. A rare alert ...


    By Associated Press

  • ASTM D6987 / D6987M - 11 standard test method for evaluation of diesel engine oils in t-10 exhaust gas recirculation diesel engine

    This test method was developed to evaluate the wear performance of engine oils in turbocharged and intercooled four-cycle diesel engines equipped with EGR. Obtain results from used oil analysis and component measurements before and after the test. The test method may be used for engine oil specification acceptance when all details of the procedure are followed. ...


    By ASTM International

  • ASTM C1594 - 11 Standard Specification for Polyimide Rigid Cellular Thermal Insulation

    This specification establishes the composition and physical properties of rigid polyimide cellular foams intended for use as thermal and sound-isolating insulation in commercial and industrial environments. The polyimide insulations covered are classified into three types (Types I, II, and III) according to closed cell content, and into four grades (Grades ...


    By ASTM International

  • ASTM D1655 - 11b standard specification for aviation turbine fuels

    This specification covers purchases of aviation turbine fuel under contract and is intended primarily for use by purchasing agencies. This specification does not include all fuels satisfactory for reciprocating aviation turbine engines, but rather, defines the following specific types of aviation fuel for civil use: Jet A; and Jet A-1. The ...


    By ASTM International

  • Latest Study On Solid State Thin Film Battery Market, 2019-2019

    ResearchMoz.us include new market research report" Solid State Thin Film Battery: Market Shares, Strategies, and Forecasts, Worldwide, Nanotechnology, 2013 to 2019" to its huge collection of research reports. Global Solid State Thin Film ...


  • Breaking the law, at the nanoscale

    A well-established physical law describes the transfer of heat between two objects, but some physicists have long predicted that the law should break down when the objects are very close together. Scientists had never been able to confirm, or measure, this breakdown in practice. For the first time, however, MIT researchers have achieved this feat, and determined that the heat transfer can be ...

  • ASTM D4814 - 11b Standard Specification for Automotive Spark-Ignition Engine Fuel

    This specification describes the various characteristics and requirements of automotive fuels for use over a wide range of operating conditions in ground vehicles equipped with spark-ignition engines. It provides for a variation of the volatility and water tolerance of automotive fuel in accordance with seasonal climatic changes at the locality where the fuel is used. This ...


    By ASTM International

  • Solar Technology Markets Will Reach $1 Trillion by 2021

    MarketResearch.com has announced the addition of the new report "Solar Technology Market Shares, Strategies, and Forecasts, Worldwide, 2011 to 2017," to their collection of Energy market reports. For more information, visit http://www.marketresearch.com/product/display.asp?ProductID=6480816 The worldwide demand for energy ...


  • MACPRESSE@IFAT, Munich, 30 May-3 June 2016

    30 May, Munich. IFAT, the world’s leading fair trade on environmental technology, opens its door and celebrates its 50th anniversary. The previous edition in 2014 attracted over 3,000 exhibitors from 59 countries and over 135,000 visitors from 168 countries, with an exhibition space of 230,000 square meters. IFAT is not only a ...


    By Macpresse Europa S.R.L

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you