nozzle separator News

  • Metal Separation in the Processing of Secondary Fuels - the Extraction of Potential Recycables and Equipment Protection

    The treatment of solid domestic and commercial refuse and the extraction of secondary fuels from these materials will be subject to stricter regulations due to new landfill regulations coming into force. In this way, it will be possible to further increase the recycling quotas and minimize bottlenecks in processing capacity. There are grounds for believing that the competition between ...

  • New Aerosol Generators for Low Mass Flows with High Reproducibility

    Especially for setting of low mass flows with very high reproducibility Topas launched the Aerosol Generators ATM 221 and ATM 231 as an extension of the very successful product range ATM. The ATM 221 has an nozzle submersed in the test liquid (Laskin mode) and the ATM 231 uses a Laskin-nozzle. These modifications ensure better ability to set ...


    By Topas GmbH

  • New Sorting System! First 3-Way Sorting Machine for Fines

    The new developed REDWAVE CXF sorting machines are highly efficient 2-way and 3-way sorting systems. The unique 3-way design offers the same high performance for the first and second eject. This new concept in combination with the new high performance valve and nozzle arrangement allows compact sorting plants with less sorting steps but without losing quality and yield. REDWAVE sorting ...

  • Chopper pump makes mincemeat of pork scratchings

    Problem: Fats and pieces of pig skin used in the manufacture of pork scratchings at OK Snacks were causing standard equipment to break down, resulting in time and cost spent on clearing the blockage. Solution: A reception tank was installed with an external Landia chopper pump placed near the bottom. Furthermore, a recirculation system was introduced which allows the pump to chop and then ...


    By Landia

  • ASTM F2465 / F2465M - 05(2011)e1 standard guide for oil spill dispersant application equipment: single-point spray systems

    This guide covers performance criteria, requirements, material characteristics, and essential features for oil spill dispersant application systems. This guide also covers vessel-based spray systems employing single-point spray nozzles. Oil spill dispersant spray equipment shall conform to the minimum performance requirements such as ...


    By ASTM International

  • ANDRITZ launches the TurboJet weir plate, a power recovery system for decanters, reducing power consumption by up to 30%

    International technology Group ANDRITZ presents a new generation of weir plates, providing a significant reduction in power consumption for centrifuges. The patented TurboJet weir plate, available for all ANDRITZ decanters and those of other suppliers, helps customers to reduce their energy consumption by 10- 30%. This innovative product was developed in the ANDRITZ Separation Center of ...

  • New Shepard Space Vehicle Makes Fifth Flight

    JASC congratulates Blue Origin on the fifth flight of its re-useable New Shepard space vehicle on Wednesday, October 5. The in-flight test of the capsule abort system successfully separated the capsule from the booster. The capsule descended under parachutes to a landing in the west Texas desert. The booster survived the separation and continued on under power to an apogee of 307,458 feet and ...

  • Biological Wash Water Treatment for the Golf Industry

    ESD Waste2Water, Inc. manufactures a full array of Wash Water Treatment and Chemical Mix/Load Equipment to meet the Golf Industry best practices. Our Biological Wash Water Treatment System treats the waste water generated from washing off fairway mowers, green mowers, utility equipment, etc. Here’s how it works: The High Flow adjustable nozzles allow the operators to get ...


    By ESD Waste2Water, Inc.

  • ASTM C1407 - 98(2011)e1 standard practice for calculating areas, volume, and linear change of refractory shapes

    Fireclay steel-teeming nozzles and sleeves are classified by volume reheat change. Bloating of some refractories results in irregular reheat dimensions, which are difficult to measure. This practice determines the volume without depending upon physical linear measurements. Blast furnace checkers that have irregular cross-sections are classified by “creep properties.” This practice ...


    By ASTM International

  • New air jet sieving machine as 200 jet

    The new air jet sieve AS 200 jet is particularly suitable for low density materials with particle sizes in the lower micron range. It is used with 203 mm (8’’) sieves of 10 microns mesh size or more. An industrial vacuum cleaner generates a jet of air which disperses the particles on the sieve through a slotted nozzle. The material which passes the sieve is transported to the vacuum cleaner ...

  • Redwave glass recycling day

    The event was primarily dedicated to the presentation of the new glass sorting machines, Redwave CX for material 6-50mm and Redwave (XI for fine material 2-12mm. Redwave CX and CXF machines are equipped with a completely reworked three-way system. By rearranging the valve units, the same high performance at the first and second eject is guaranteed even for fine material, and air consumption is ...

  • Equal ejections help sort glass

    What is your product? Redwave's three-way sensor-based sorting machine for glass fines from 2mm. How does it work? The Redwave CX is for material 6-50mm and the CXF for fine material 2-12mm, Both machines are equipped with a completely reworked three-way system. By rearranging the valve units, the same high performance at the first and second eject ...

  • Friction-washer FW series used to wash plastic materials

    ?Applications? The NEUE HERBOLD friction washer FW Series is used to intensively wash plastic materials such as film flakes, granulate to include PET bottle flake and other types of rigid plastics. ...

  • Körting at Achema 2015

    The 31st Achema, a global showcase for the chemical engineering and processing industry, will take place from 15 to 19 June 2015 in Frankfurt am Main, Germany. Held every three years, it’s a trendsetting meet-up in the industry. For Körting Hannover AG it’s also important because it indicates many key developments. Decisions on investments and the associated large orders are ...


    By Körting Hannover AG

  • ASTM D1066 - 11 standard practice for sampling steam

    It is essential to sample steam representatively in order to determine the amount of all impurities (dissolved chemicals, solid particles, chemicals absorbed on solid particles, water droplets) in it (1). An accurate measure of the purity of steam provides information, which may be used to determine whether the purity of the steam is within necessary limits to prevent damage or ...


    By ASTM International

  • ASTM F558 - 11 standard test method for measuring air performance characteristics of vacuum cleaners

    The test results allow the comparison of the maximum potential air power available for cleaning tasks when tested under the conditions of this test method. The test results do not indicate the actual air power present during the cleaning process due to the effects of the various tools in use and surfaces being cleaned. During ...


    By ASTM International

  • ASTM F1334 - 11 standard test method for determining a-weighted sound power level of vacuum cleaners

    The test results enable the comparison of A-weighted sound emission from vacuum cleaners when tested under the condition of this test method. 1. Scope 1.1 This test method calculates the overall A-weighted sound power level emitted by small portable upright, canister, combination vacuum cleaners, and central vacuum cleaner ...


    By ASTM International

  • Daimer Releases New Auto Detailing Car Wash Systems for Better Vehicle Finishes

    Woburn, MA U.S.A.– May 1 , 2012 - Daimer Industries®, established internationally as a source for mobile car wash systems, announced plans to ship three new machines optimized for auto detailing: The Super Max™ 12800SCW, 12820SCW and 12805SCW. The machines are all electrically powered and heated with fuel. The 12805 is a 50 Hz ...


    By Daimer Industries Inc.

  • A Jarshire/Impact Air joint venture solution for SCA

    Along with a number of other extraction equipment companies, Jarshire Limited, in conjunction with their joint venture partner Impact Air, was invited by SCA to design a waste extraction system to provide for the clean and efficient removal of cookies – the waste off-cuts created in the production of toilet rolls. The requirement was to provide auto extraction of the cookie waste, deliver it to a ...


  • Complex issues with incinerating liquid and gaseous residues

    Production processes in the chem-ical and pharmaceutical industries give rise to gaseous and liquid residues that are preferably disposed of in decentralized incinerators. Most of these residues are highly caloric gases and solutions containing high concentrations of organic substances. The complexity of these often toxic substances requires the use of special equipment for the incineration ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you