particle sizing equipment News

  • Powerful DPSS lasers for Particle Sizing

    Our compact, powerful FlowExplorer DPSS combined with HiDense PDA is ideally suited for droplet sizing in dense sprays.  The FlowExplorer DPSS, having no optical fibers in the transmitting head, makes it an efficient unit, transmitting much of the laser power to the measurement volume. This factory aligned and turnkey system minimizes installation time and get’s you ...


    By Dantec Dynamics

  • Pin Mill Controls Particle Sizes, Cleans Rapidly

    A new 24-inch (610 mm) diameter Pin Mill model CIM-24-MS from Munson Machinery grinds, sizes, de-agglomerates and homogenizes friable or other materials into controlled particle sizes, from coarse to fine (400 mesh). Also known as a Centrifugal Impact Mill, it is equipped with a stationary outer disc and a rotating inner disc, both ...

  • Huge demand for PM all monitor

    Palas, the German manufacturer of particulate monitoring instruments, is expanding production to cope with demand for its fine particulate monitor, the Fidas® 200, which is distributed in the UK by Air Monitors. In the following article Jim Mills explains why Air Monitors is being kept busy by the demand for this exciting new technology. PM monitoring – the ultimate ...


    By Air Monitors Ltd.

  • TANA Shark attacks ragger wire in France

    To process a stock of strands coming from the paper industry, the Suez RV Grand-Ouest plant situated at Isigny-le-Buat, France was looking for a slow, robust and efficient shredder. Tana's dealer in the area Smart Equipmenttogether with Smet Rental provided them with the right solution: TANA Shark 440DT. The plant has previously processed electrical cables and has three fast speed shredders ...


    By Tana Oy

  • Enviro-Equipment, Inc. Announces the Addition of Laser Particle Counters for Indoor Air Contamination Monitoring

    Enviro-Equipment, Inc. is pleased to announce the addition of the new TSI AeroTrak 9306-V2 Particle Counter to its rental fleet. A global provider of specialty equipment for environmental remediation and more, Enviro-Equipment expands their selection of ...


    By Enviro-Equipment, Inc.

  • Attrition Mill Reduces Particles Down To 100 Mesh

    A new Model SK-24-MS Attrition Mill from Munson Machinery reduces friable chemicals and minerals, as well as metal powders, wood flour, fertilizers, insecticides and fibers, producing particles within relatively narrow size ranges from 10- down to 100-mesh. The 24 in. (61 cm) diameter mill is equipped with an outer ...

  • Californians dying prematurely from particles in vehicle exhaust

    Every year, up to 24,000 Californians die prematurely because they breathe fine particle pollution over a long period of time, according to research presented this week to the California Air Resources Board. A majority of these deaths occur in highly populated areas around the state, including the South Coast, the San Joaquin Valley and the San Francisco Bay air basins.  All combustion ...

  • REGULATOR - CETRISA presents its new ECS for small particles

    R-SPM-AM is the new REGULATOR - CETRISA Eddy Current Separator (ECS) for recycling small size of No Ferrous Metals. It offers the ideal solution for process the smallest of the fine fraction (# > 2mm). Customers at Glass or ELV industries who are already working with these equipment (R-SPM Series) have shared their satisfaction because the good results achieved. This ECS (Model ...


    By Regulator-Cetrisa

  • Clean-up removes 29 `significant` particles from seabed

    More than a hundred fragments of spent nuclear fuel were removed from the seabed in the latest phase of work to clean up and shut down the former nuclear research site at Dounreay. The particles were detected and retrieved by a remotely-operated vehicle that systematically scanned an area of seabed equivalent in size to more than 10 football pitches. ...

  • Ultra-fine particles emitted by commercial desktop 3D printers

    Desktop three-dimensional (3D) printers, available for use in offices and homes, can release between 20 and 200 billion ultra-fine particles (UFPs) per minute, finds new research. UFPs may pose a risk to health, and the study’s authors recommend caution when operating 3D printers inside unventilated or unfiltered indoor environments. The advent of low-cost commercial desktop 3D printers, ...

  • Particle counters help indoor air quality professionals survey buildings

    Particle counters have become a common and useful tool for building investigations in recent years. As technologies have improved, the costs of the units have become more economical and the measuring capabilities more sensitive. The instrument user now has an unsurpassed amount of valuable information at their fingertips.Aerosol particle counters work by detecting and counting particles that are ...


  • Shimadzu’s New Aggregation Analysis System for Biopharmaceuticals Enables Real-time Quantitative Analysis of Sub-Visible Particles

    Shimadzu Scientific Instruments has introduced an Aggregates Sizer Aggregation Analysis System, the first commercially available tool to provide real-time quantitative evaluation of 100nm to 10μm sub-visible particle (SVP) aggregates. By screening and identifying aggregation-prone proteins in early stage drug development, manufacturers can save time and reduce costs. Sub-visible particle ...

  • ASTM F2519 - 05(2011) Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors

    The pressure drop results can be added to the pressure drops of other components in an exhaust system to determine the total exhaust fan pressure requirement. The particulate capture efficiency can be used with known particulate size emission data for a cooking appliance-food product combination to determine the total mass of grease particles captured by the ...


    By ASTM International

  • Finer particles give more useful air quality data, says new research

    New air quality research indicates that measuring ultra-fine particles can distinguish between particles generated through human activities, such as combustion, and larger particles, which are more likely to arise from mechanical processes and natural sources. The smallest air particles are from combustion sources such as vehicles and power plants, and easily enter the body. However, air quality ...

  • Met One Instruments, Inc. introduces the next generation in airborne particle counting instrumentation

    Met One Instruments Inc., is pleased to announce the availability of the Model 804 handheld 4-channel particle counter – the latest in a line of innovative measuring equipment for detection of particulate contamination in controlled environments. The 804 enables the user to record 4 channels of simultaneous data from a selection of 7 sizes ranging 0.3 micron to 10.0 micron.   Met ...


    By Met One Instruments, Inc.

  • Smaller particles, bigger savings: New technology offers industrial users finer filtration

    Diversified industrial manufacturer Eaton introduces their low-micron element for industrial users that offers finer filtration down to 25 microns, substantially lowers pressure differential and increases flow capacity. Available for the stainless steel, 2” - 8” Model 2596 automatic self-cleaning strainers, this rigid, cylindrical stainless steel element cleans easily, which leads to ...


    By Eaton Corporation

  • Met One Instruments, Inc.`s new portable BT-637 bench-top airborne particle counter now available

    You wouldn't think something so small could have such a big impact. However, Met One Instruments' new portable BT-637 Bench-Top Airborne Particle Counter is a small, portable tool that looks to have a big impact on Indoor Air Quality. This lightweight bench-top Indoor Air Quality instrument will monitor particulate matter, temperature, and relative humidity in the workplace and verify the health ...


    By Met One Instruments, Inc.

  • Chinese Environmental Protection Equipment Industry Research Report

    This report presents a clear picture about the overall development of environmental protection equipment market in China and the trend in recent years based on detailed data analysis. This report includes the analysis on the environmental protection equipment market size and market share in China, the study on major hot areas in this market, introduction of key data and the comparison of major 10 ...

  • China Environmental Protection Equipment Market Analysis

    This report presents a clear picture about the overall development of environmental protection equipment market in China and the trend in recent years based on detailed data analysis. This report includes the analysis on the environmental protection equipment market size and market share in China, the study on major hot areas in this market, introduction of key data and the comparison of major 10 ...

  • Tires pyrolysis equipment manufacturer presents new product

    For several years the Technokomplex company has been working on development of the equipment for production of marketable fractions from carbon. The present design of the Konstanta line has all improvements and innovations which make it possible to use independently from Pirotex pyrolysis plant. "We are glad to introduce our customers the ...


    By Technokomplex

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you