Particulate Analyzer News on Environmental XPRT

airmoSCAN xpert PAHs: New Chromatotec® TD GC FID/MS for online and continuous monitoring of PAHs and linear alkanes in ambient air

Polycyclic aromatic hydrocarbons (PAHs) are recognized as very toxic group of organic compounds, with documented carcinogenic, mutagenic and teratogenic properties. PAHs are formed as a result of the incomplete combustion of organic materials. They are produced naturally like by wood fire, volcanoes and by human activities like coal and gasoline combustion. They are particularly prevalent in ...

Jun. 14, 2017

By Chromatotec Group

AQMS: New certification for the Continuous Suspended Particulate Beta Attenuation Analyzer MP101M

We are pleased to announce that effective July 8, 2011, the Continuous Suspended Particulate Beta Attenuation Analyzer MP101M with associated module CPM has obtained certification as equivalent analyzer to Federal Reference Method from the Ministry of the Environment of Japan (MOE) for PM2.5. The standard Beta gauge measurement Method ISO 10473 of the MP101M analyzer allows, when used with ...

Jul. 8, 2011

By Environnement S.A

Enviro Technology Launch Dust Analyzer ‘Old for New’ Part Exchange Deal in Response to DEFRA Particulate Monitoring Report

Air Quality Monitoring specialists, Enviro Technology, are offering those local authorities and environmental departments currently using non-conforming TEOM analysers a value-for-money, part exchange deal, which allows an upgrade to a brand new DEFRA approved BAM-1020 Dust Analyser at a substantially lower price than a costly TEOM FDMS upgrade. This BAM-1020 ‘old for new’ part exchange deal ...

Feb. 5, 2007

By Enviro Technology Services Ltd

The MP101M particulates monitor strengthens the Asian cooperation

Environnement S.A and his local Partners have finished the installation of a complete particulate measurement system MP101M for the monitoring of PM2.5 fine dust for the ACAP (Asia Center for Air Pollution Research) in the field of Vietnamese institute IMHEN. Environnement SA is proud that his solution has been selected for such a major challenge in Asia and continues its cooperation with the ...

Mar. 10, 2015

By Environnement S.A

Real time monitoring using particulate samplers

Ecotech is pleased to announce the release of a real time particulate module for use with its range of particulate samplers.High Volume Air Samplers are designed to sample ambient air through a pre-weighed filter for 24 hours after which the filter is weighed and PM concentration calculated. While there are approved methods for semi-real time monitoring such as the Tapered Element Oscillating ...

May 6, 2010

By Ecotech Pty Ltd

COD analyzer for laboratories

LAR's QuickCODlab is a chemical-free working COD analyzer for the determination of the chemical oxygen demand (COD) in water. Due to an innovative injection and oxidation technique, unfiltered water samples incl. particulates will be injected ...

Sep. 16, 2016

By LAR Process Analysers AG

TOC Analyzer for Cooling Water

The on-line TOC analyzer QuickTOCultra by LAR Process Analysers AG, Berlin, is a measurement system for the determination of the total organic carbon (TOC) in water. The parameter TOC will be inter alia used for the assessment of cooling water quality. Using a ...

Feb. 9, 2016

By LAR Process Analysers AG

COD Analyzer for Waste Water Analysis

LAR's QuickCODultra is an online COD analyzer for the determination of the chemical oxygen demand (COD) in complex water. The analyzer uses a robotic horizontally and vertically moving injection needle. It enables the injection of the raw waste water sample incl. particulates into the ...

Mar. 10, 2015

By LAR Process Analysers AG

ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance ...

Jan. 12, 2012

By ASTM International

ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance assessment and optimization of particulate matter ...

Jan. 12, 2012

By ASTM International

ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance assessment and optimization of particulate matter control systems, continuous ...

Jan. 10, 2012

By ASTM International

Air monitoring results for particulate matter, asbestos posted on EPA`s Joplin tornado web page; no health concerns so far

EPA Region 7 is sharing online the results of its ongoing air monitoring activities within the Joplin, Mo., tornado impact zone. So far, the data from Region 7’s air sampling for asbestos and particulate matter, which began May 28, has not indicated any health-related concerns. As additional data is collected and analyzed, EPA will post those results at www.epa.gov/joplin, which also ...

Jun. 7, 2011

By US EPA - Environmental Protection Agency

All power pump applications to be analyzed on a free website

Pumps work in thousands of power industry applications. Each coal-fired, combined cycle gas, and nuclear power plant requires hundreds of pumps. They range the gamut of sizes and designs from the 6000 gpm (7000 ft head) vertical boiler feed water pumps to the little positive displacement chemical metering pumps. Geothermal plants have special pump requirements. Pumps are ...

Sep. 8, 2009

By The McIlvaine Company

Environnement SA announces the CPA: a revolutionary analyzer for measuring the air quality

ENVIRONMENT SA developed in cooperation with the Laboratory of Physics and Chemistry of the Environment and Space (LPC2E) of the CNRS a fully-optical and patented* particle analyzer providing continuous and simultaneous information on the concentration, size and the nature of inhalable particles (TSP, PM10, PM2.5, PM1). Completely autonomous, automatic and capable to detect short events with high ...

Nov. 17, 2011

By Environnement S.A

Research and Markets: Analyzing the Global Market for Clean Coal Equipment: 2013 Report

Research and Markets (http://www.researchandmarkets.com/research/dm3r7l/analyzing_the) has announced the addition of the "Analyzing the Global Market for Clean Coal Equipment" report to their offering. Analyzing the Global Market for ...

May 28, 2013

Shimadzu Releases Total Nitrogen/Total Phosphorus Online Analyzers

Shimadzu’s TNPC-4110 Series online analyzers are capable of measuring Total Nitrogen (TN) and Total Phosphorus (TP) in water. Easy-to-handle and simple-to-maintain, the TNPC-4110 analyzers are intended for use as automatic water analyzers for the water quality regulations currently being prepared for implementation governing TN and TP. These nutrients are monitored as indicators of the harmful ...

Oct. 19, 2006

By Shimadzu Scientific Instruments Inc

New Sievers InnovOx (TOC) Analyzer handles the toughest samples

GE Analytical Instruments, a division of GE Water & Process Technologies, announced its new Sievers InnovOx Laboratory Total Organic Carbon (TOC) Analyzer, designed to run thousands of diverse TOC samples—including brine and cellulose—without any need for time-consuming reactor cleaning or expensive catalyst replacement. The Sievers InnovOx offers unmatched oxidation robustness, a dynamic linear ...

Mar. 24, 2008

By GE Analytical Instruments

Ametek introduces WDG-V Combustion Analyzer offering improved process and safety functions

AMETEK Process Instruments, a leader in online analytical instrumentation, has introduced the next-generation in close-coupled extractive combustion analyzers with the launch of the Thermox WDG-V combustion analyzer for measuring oxygen, combustibles and methane levels in hot, wet flue gas. The WDG-V analyzer provides a ...

Jun. 11, 2013

By Ametek Process Instruments - THERMOX

CEM 2014: stand No. 39 discover a complete range of analyzers, DAS and software for the monitoring of almost all pollutants

Join us in Istanbul from 14th to 16th of May 2014, stand 39 CEM 2014 - The 11th International Conference and exhibition on Emissions monitoring will take place in Turkey in the country’s financial and cultural capital, Istanbul, ...

May 9, 2014

By Environnement S.A

Gas Analyzer, Sensor & Detector Market - By Technologies, By Systems& By End-User Industries - Global Trends & Forecasts to 2018

Gas analyzers, sensors and detectors (GASD) are safety devices used in the industrial, commercial, medical and several other industries. Generally, these devices play a major role in providing life safety and to avoid fire break outs by continuously analyzing and monitoring the concentration of gases in different end user industries. Hence, gas analyzers, sensors and detectors are used to measure ...

Aug. 2, 2013

Subscribe to our eBulletins

Add Supplier Profile