particulate measurement system News

  • The ultimate Particulate Measurement System comes to ET

    Leading air quality monitoring supplier Enviro Technology Services Plc, now offers what it considers to be “the ultimate ambient Particulate Measurement System”. Ambient particulate measurement is generally carried out in two ways, either by continuous automatic mass measurement using a monitor or by manual sampling and subsequent gravimetric weighing using a sampler. As ...

  • New particulate measurement technology enables climate change ‘quick hit’

    More accurate measurement of Black Carbon particles is now within reach of UK local authorities, air quality and climate change researchers and industry thanks to a highly-specified device, newly available via Enviro Technology.   Reducing levels of Black Carbon in the air improves human health and slows climate change. Because it is dark, Black Carbon absorbs a lot of heat from the sun and ...

  • New Webinar Now Available On Demand - Measuring Opacity and Particulate Emissions From Combustion Processes

    View our webinar where we introduce the concepts behind opacity and particulate measurement, describe the key technologies and provide detailed insight into the requirements for a successful installation. An opacity monitor provides a simple and robust means for emissions monitoring in combustion processes, but under some conditions a particulate matter (PM) monitor may be necessary. ...


    By AMETEK Land

  • Real time monitoring using particulate samplers

    Ecotech is pleased to announce the release of a real time particulate module for use with its range of particulate samplers.High Volume Air Samplers are designed to sample ambient air through a pre-weighed filter for 24 hours after which the filter is weighed and PM concentration calculated. While there are approved methods for semi-real time monitoring such as the Tapered Element Oscillating ...


    By Ecotech Pty Ltd

  • Exposing Indoor Air Quality with YESDUST Particulate Sensor

    Delta, B.C. – Critical Environment Technologies Canada Inc. (CETCI) recently introduced YESDUST. This particulate sensor is designed to be used in conjunction with the multi-sensor indoor air quality (IAQ) monitors developed by CETCI, such as the YESAIR. YESDUST is a low-cost, hand-held, battery powered device. It contains a self-aspired, optical sensor that utilizes convection (heated air) to ...

  • The MP101M particulates monitor strengthens the Asian cooperation

    Environnement S.A and his local Partners have finished the installation of a complete particulate measurement system MP101M for the monitoring of PM2.5 fine dust for the ACAP (Asia Center for Air Pollution Research) in the field of Vietnamese institute IMHEN. Environnement SA is proud that his solution has been selected for such a major challenge in Asia and continues its cooperation with the ...


    By Environnement S.A

  • New particulate monitors will improve understanding of health effects

    Globally, fine dust particles have been the focus of much greater attention in recent months as their role in deaths related to poor air quality becomes better understood. However, knowledge of the relationship between airborne particles and health effects is limited by the information that can be obtained by monitoring technologies. Jim Mills, a particulate monitoring specialist from Air ...


    By Air Monitors Ltd.

  • Air Monitors launches latest industrial particulate monitors

    A new report published in September 2012 by the European Environment Agency shows that almost a third of Europe's city dwellers are exposed to excessive concentrations of airborne particulate matter (PM); one of the most important pollutants in terms of harm to human health because it penetrates sensitive parts of the respiratory system. Colin Craggs from instrumentation specialist Air Monitors ...


    By Air Monitors Ltd.

  • FerroCheck 2000 Magnetometer Series from Spectro Scientific Adds Capability to Measure Ferrous Particulates In Grease, Meets ASTM Test Method

    The FerroCheck 2000 Series of portable magnetometers from Spectro Scientific quickly and conveniently measures total ferrous wear particulates in lubricating fluids. The FerroCheck 2000 unit, which measures ferrous wear particles in oils, is now joined by the FerroCheck 2100 version that adds the capability to quantify up to 15% ferrous debris in grease. The instruments enable users in ...


    By Spectro Scientific

  • Air Monitors MD speaks out on national network particulate monitor performance

    Many of the adverse health effects from air pollution can be attributed to fine particulates, so the accuracy and reliability of the UK’s ambient particulate monitoring network is extremely important. Since the early 1990s, this network has relied on TEOM and more recently the TEOM-FDMS direct mass measurement technology, but Air Monitors MD Jim Mills is concerned that the reputation of ...


    By Air Monitors Ltd.

  • BAM1020 Real-Time Ambient Particulate Monitor Wins MCERTS Approval

    On behalf of Met One Instruments (USA), air quality monitoring specialists, Enviro Technology were presented with an MCERTS certificate for the BAM-1020 continuous ambient particulate monitor at the recent annual MCERTS 2011.  Under strict UK and European laws, businesses and organisations which release emissions into the air must carefully monitor their discharge to the environment. To this ...

  • French WWTP are using PCME view 370 for Sludge Dryer Particulate Monitoring

    The amount of dust produced in the dryer and later processing plant is affected by the type of dryer installed. As sewage sludge dust has a similar range of figures to wood flour, there is the potential for a dust explosion to occur in the main dryer, dust collection and handling plant, pelletiser and final product discharge plant. The material can ...


    By Environnement S.A

  • In 2012 - Less nitrogen oxides and particulate matters from trucks and buses in the EU

    The European Commission welcomes this week's support of the European Parliament for its proposal to reduce in 2012 emissions from trucks and busses of nitrogen oxides by 80% and particulate matter by 66% compared to the Euro V stage. The proposal will also add to the competitiveness of the European automotive industry through the introduction of world-wide harmonised test procedures and ...

  • AQMS: New certification for the Continuous Suspended Particulate Beta Attenuation Analyzer MP101M

    We are pleased to announce that effective July 8, 2011, the Continuous Suspended Particulate Beta Attenuation Analyzer MP101M with associated module CPM has obtained certification as equivalent analyzer to Federal Reference Method from the Ministry of the Environment of Japan (MOE) for PM2.5.  The standard Beta gauge measurement Method ISO 10473 of the MP101M analyzer allows, when used with ...


    By Environnement S.A

  • French WWTP are using PCME VIEW 370 for sludge dryer particulate monitoring

    The amount of dust produced in the dryer and later processing plant is affected by the type of dryer installed. As sewage sludge dust has a similar range of figures to wood flour, there is the potential for a dust explosion to occur in the main dryer, dust collection and handling plant, pelletiser and final product discharge plant. The material can also self heat leading to ignition and a slow ...


    By Environnement S.A

  • Atmospheric particulate matter in Germany `excessive` in 2007, says federal environment agency

    The German Federal Environment Agency’s preliminary evaluation of 415 measuring stations demonstrates that favourable atmospheric conditions in 2007 were a relevant factor that account for lower levels of particulate pollution than in previous years.  Yet there is absolutely no reason to sound the all-clear, for 2007 also had incidences of particulate matter concentrations above the ...


    By Federal Environment Ministry

  • PCME launches new Flue Gas Measurement System

    PCME Ltd, leading specialist in the development, manufacture and supply of continuous particulate emission monitors, introduce the STACKFLØW 400 designed specifically to monitor the flow rate of emissions from industrial sources complying with the European Monitoring Standard EN-16911-2.  Suitable for measuring flue gas flow rates after both bag filter and electrostatic ...


    By PCME Ltd

  • ASTM F2743 - 11 standard guide for coating inspection and acute particulate characterization of coated drug-eluting vascular stent systems

    The shedding of the coating from a vascular stent can alter its clinical safety and/or therapeutic benefit. Clinical performance (for example, drug elution) may be affected by particulate generation from the coated stent system and coating defects. This document provides guidance for coating inspection and acute particulate characterization of drug eluting ...


    By ASTM International

  • BAM1020 real-time ambient particulate monitor wins MCERTS approval

    On behalf of Met One Instruments (USA), air quality monitoring specialists, Enviro Technology were presented with an MCERTS certificate for the BAM-1020 continuous ambient particulate monitor at the recent annual MCERTS 2011 Conference & Exhibition Gala Dinner in Telford. Under strict UK and European laws, businesses and organisations which release emissions into the air must carefully ...

  • ET brings real-time particulate data module to market

    Air quality monitoring specialists can now access real-time particulate data via a simple bolt-on accessory for the BAM-1020, available from Enviro Technology. The BX-895 Real Time Module created by Met One Instruments complements standard hourly readings with one, five, ten, 15 or 30 minute averages. This functionality is useful when correlating changing wind conditions to particulate events or ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you