particulate monitoring system News

  • Huge demand for PM all monitor

    Palas, the German manufacturer of particulate monitoring instruments, is expanding production to cope with demand for its fine particulate monitor, the Fidas® 200, which is distributed in the UK by Air Monitors. In the following article Jim Mills explains why Air Monitors is being kept busy by the demand for this exciting new technology. PM monitoring – the ultimate ...


    By Air Monitors Ltd.

  • Air Monitors launches latest industrial particulate monitors

    A new report published in September 2012 by the European Environment Agency shows that almost a third of Europe's city dwellers are exposed to excessive concentrations of airborne particulate matter (PM); one of the most important pollutants in terms of harm to human health because it penetrates sensitive parts of the respiratory system. Colin Craggs from instrumentation specialist Air Monitors ...


    By Air Monitors Ltd.

  • The MP101M particulates monitor strengthens the Asian cooperation

    Environnement S.A and his local Partners have finished the installation of a complete particulate measurement system MP101M for the monitoring of PM2.5 fine dust for the ACAP (Asia Center for Air Pollution Research) in the field of Vietnamese institute IMHEN. Environnement SA is proud that his solution has been selected for such a major challenge in Asia and continues its cooperation with the ...


    By Environnement S.A

  • New particulate monitors will improve understanding of health effects

    Globally, fine dust particles have been the focus of much greater attention in recent months as their role in deaths related to poor air quality becomes better understood. However, knowledge of the relationship between airborne particles and health effects is limited by the information that can be obtained by monitoring technologies. Jim Mills, a particulate monitoring specialist from Air ...


    By Air Monitors Ltd.

  • BAM1020 particulate monitors receive new MCERTS certificates.

    Air quality monitoring specialist, Enviro Technology Services is pleased to announce new MCERTS Product Conformity Certificates for its popular automatic particulate monitor, the BAM1020. The Smart Heated PM2.5 model received certification on the 14th February 2014 and is certified up to the 5th December 2018 and the Smart Heated PM10 model ...

  • BAM1020 particulate monitors receive new MCERTS certificates

    Air quality monitoring specialist, Enviro Technology Services is pleased to announce new MCERTS Product Conformity Certificates for its popular automatic particulate monitor, the BAM1020. The Smart Heated PM2.5 model received certification on the 14th  February 2014 and is certified up to the 5th December 2018 and the Smart Heated PM10 model ...

  • Real time monitoring using particulate samplers

    Ecotech is pleased to announce the release of a real time particulate module for use with its range of particulate samplers.High Volume Air Samplers are designed to sample ambient air through a pre-weighed filter for 24 hours after which the filter is weighed and PM concentration calculated. While there are approved methods for semi-real time monitoring such as the Tapered Element Oscillating ...


    By Ecotech Pty Ltd

  • Air Monitors MD speaks out on national network particulate monitor performance

    Many of the adverse health effects from air pollution can be attributed to fine particulates, so the accuracy and reliability of the UK’s ambient particulate monitoring network is extremely important. Since the early 1990s, this network has relied on TEOM and more recently the TEOM-FDMS direct mass measurement technology, but Air Monitors MD Jim Mills is concerned that the reputation of ...


    By Air Monitors Ltd.

  • The ultimate Particulate Measurement System comes to ET

    Leading air quality monitoring supplier Enviro Technology Services Plc, now offers what it considers to be “the ultimate ambient Particulate Measurement System”. Ambient particulate measurement is generally carried out in two ways, either by continuous automatic mass measurement using a monitor or by manual sampling and subsequent gravimetric weighing using a sampler. As ...

  • French WWTP are using PCME VIEW 370 for sludge dryer particulate monitoring

    The amount of dust produced in the dryer and later processing plant is affected by the type of dryer installed. As sewage sludge dust has a similar range of figures to wood flour, there is the potential for a dust explosion to occur in the main dryer, dust collection and handling plant, pelletiser and final product discharge plant. The material can also self heat leading to ignition and a slow ...


    By Environnement S.A

  • BAM1020 real-time ambient particulate monitor wins MCERTS approval

    On behalf of Met One Instruments (USA), air quality monitoring specialists, Enviro Technology were presented with an MCERTS certificate for the BAM-1020 continuous ambient particulate monitor at the recent annual MCERTS 2011 Conference & Exhibition Gala Dinner in Telford. Under strict UK and European laws, businesses and organisations which release emissions into the air must carefully ...

  • French WWTP are using PCME view 370 for Sludge Dryer Particulate Monitoring

    The amount of dust produced in the dryer and later processing plant is affected by the type of dryer installed. As sewage sludge dust has a similar range of figures to wood flour, there is the potential for a dust explosion to occur in the main dryer, dust collection and handling plant, pelletiser and final product discharge plant. The material can ...


    By Environnement S.A

  • Lab Impex launch SmartCAM their New Alpha/Beta Particulate in Air monitor

    SmartCAM is the next generation Continuous Air Monitor (CAM) delivering unparalleled performance in terms of detectable limit, sensitivity and speed to alarm. SmartCAM utilises Spectral Measurement Analysis in Real Time (SMART) technology to provide real advances in alpha particulate detection techniques.Using an isotope peak fitting algorithm is proven to be more accurate than using ...

  • BAM1020 Real-Time Ambient Particulate Monitor Wins MCERTS Approval

    On behalf of Met One Instruments (USA), air quality monitoring specialists, Enviro Technology were presented with an MCERTS certificate for the BAM-1020 continuous ambient particulate monitor at the recent annual MCERTS 2011.  Under strict UK and European laws, businesses and organisations which release emissions into the air must carefully monitor their discharge to the environment. To this ...

  • Exposing Indoor Air Quality with YESDUST Particulate Sensor

    Delta, B.C. – Critical Environment Technologies Canada Inc. (CETCI) recently introduced YESDUST. This particulate sensor is designed to be used in conjunction with the multi-sensor indoor air quality (IAQ) monitors developed by CETCI, such as the YESAIR. YESDUST is a low-cost, hand-held, battery powered device. It contains a self-aspired, optical sensor that utilizes convection (heated air) to ...

  • Climatronics Corporation introduces the PARTAC™ tactical particulate profiler

    (Bohemia, NY, USA) - - Climatronics Corporation’s PARTAC™ tactical particulate profiler is capable of detecting a wide range of natural and man-made airborne particulates, including those associated with WMD attacks. This robust eight-channel, low power monitor uses an internal laser scattering detector to rapidly count and sort incoming particulates by size into eight programmable bins. With a ...


    By Climatronics Corporation

  • Particulate engines now available for integration from Met One Instruments, Inc.

    Now Available for OE Applications - Met One Instruments Inc. Particulate Engines. These optical devices start from simple low cost analog samplers that can be easily integrated into an existing system to complete packages with flow system, auto-zero, auto span, and digital readout / output. We are committed to providing custom units to the OEM. If you are looking to integrate a unit for ...


    By Met One Instruments, Inc.

  • AQMS: New certification for the Continuous Suspended Particulate Beta Attenuation Analyzer MP101M

    We are pleased to announce that effective July 8, 2011, the Continuous Suspended Particulate Beta Attenuation Analyzer MP101M with associated module CPM has obtained certification as equivalent analyzer to Federal Reference Method from the Ministry of the Environment of Japan (MOE) for PM2.5.  The standard Beta gauge measurement Method ISO 10473 of the MP101M analyzer allows, when used with ...


    By Environnement S.A

  • ET brings real-time particulate data module to market

    Air quality monitoring specialists can now access real-time particulate data via a simple bolt-on accessory for the BAM-1020, available from Enviro Technology. The BX-895 Real Time Module created by Met One Instruments complements standard hourly readings with one, five, ten, 15 or 30 minute averages. This functionality is useful when correlating changing wind conditions to particulate events or ...

  • CARB Verifies Cleaire LongMile–S™ Diesel Particulate Filter

    Cleaire Advanced Emission Controls announced today that the California Air Resources Board (CARB) has verified the LongMile-S™ diesel particulate filter as Level 3+ for on-road applications. The verification covers a broad range of engine models built between 1993 and 2010, including later model EGR and Caterpillar ACERT engines. The CARB Level 3+ designation means the LongMile-S has ...


    By PRWeb

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you