particulate sampler News

  • MicroVol 1100 Compact Particulate Sampler

    Ecotech is pleased to announce the Ecotech MicroVol 1100 meets the new Australian Standards for determination of suspended particulate mater AS/NZS 3580.9.9:2006 (PM10) and AS/NZS 3580.9.10:2006 (PM2.5) . The MicroVol 1100 Particulate Sampler provides a flexible sampling platform for PM10, PM2.5 or TSP particulate sampling. The MicroVol 1100 sampler is microprocessor controlled and features ...


    By Ecotech Pty Ltd

  • Real time monitoring using particulate samplers

    Ecotech is pleased to announce the release of a real time particulate module for use with its range of particulate samplers.High Volume Air Samplers are designed to sample ambient air through a pre-weighed filter for 24 hours after which the filter is weighed and PM concentration calculated. While there are approved methods for semi-real time monitoring such as the Tapered Element Oscillating ...


    By Ecotech Pty Ltd

  • Environnement S.A. has released a new Automatic Sequential Particulate sampler – model PM162M

    Untitled Document Extremely compact and with a large autonomy, the PM162M performs automatic exchanges of up to 25 filters. Designed to meet ...


    By Environnement S.A

  • New isokinetic sampler is automatic

    Environmental monitoring equipment specialist Quantitech has announced the launch of a new generation of automatic isokinetic samplers that bring new levels of speed, accuracy and reliability to the sampling of particulates and gases from chimneys, stacks and ducts. The new Tecora Isostack G4 (4th Generation) automatically records measurement values in addition to equipment configuration data, ...


    By Quantitech Ltd

  • The ultimate Particulate Measurement System comes to ET

    Leading air quality monitoring supplier Enviro Technology Services Plc, now offers what it considers to be “the ultimate ambient Particulate Measurement System”. Ambient particulate measurement is generally carried out in two ways, either by continuous automatic mass measurement using a monitor or by manual sampling and subsequent gravimetric weighing using a sampler. As ...

  • The MP101M particulates monitor strengthens the Asian cooperation

    Environnement S.A and his local Partners have finished the installation of a complete particulate measurement system MP101M for the monitoring of PM2.5 fine dust for the ACAP (Asia Center for Air Pollution Research) in the field of Vietnamese institute IMHEN. Environnement SA is proud that his solution has been selected for such a major challenge in Asia and continues its cooperation with the ...


    By Environnement S.A

  • ASTM D3266 - 91(2011) standard test method for automated separation and collection of particulate and acidic gaseous fluoride in the atmosphere (Double paper tape sampler method)

    This test method provides a means of automatically separating and collecting atmospheric particulate and acidic gaseous fluoride samples. Since the samples are collected on dry tapes, the samples are in a form which allows elution of the fluoride content with a small volume of eluent. Consequently, the method allows analyses of air samples taken for a time period as short as several minutes. ...


    By ASTM International

  • BAM-1020 continuous particulate monitor awarded USEPA class III designation.

    Met One Instruments has become the first instrument manufacturer ever to successfully be awarded USEPA Class III equivalency designation for a continuous PM-2.5 particulate monitor. The BAM-1020 beta attenuation mass monitor has been assigned USEPA designation EQPM-0308-170, notice of which was published in the US Federal Register on March 12, 2008. The implication of this achievement is very ...


  • Met One wins US EPA class III designation for particulate monitor

    Met One Instruments has become the first instrument manufacturer ever to successfully be awarded USEPA Class III equivalency designation for a continuous PM-2.5 particulate monitor. The BAM-1020 beta attenuation mass monitor has been assigned USEPA designation EQPM-0308-170, notice of which was published in the US Federal Register on March 12, 2008. The implication of this achievement is very ...


    By Met One Instruments, Inc.

  • Particulate engines now available for integration from Met One Instruments, Inc.

    Now Available for OE Applications - Met One Instruments Inc. Particulate Engines. These optical devices start from simple low cost analog samplers that can be easily integrated into an existing system to complete packages with flow system, auto-zero, auto span, and digital readout / output. We are committed to providing custom units to the OEM. If you are looking to integrate a unit for ...


    By Met One Instruments, Inc.

  • USEPA Approval for Ecotech’s High Volume Air Sampler

    The US EPA has announced the designation of Ecotech’s HVS3000 High Volume Air Sampler as a new reference method for measuring concentrations of PM10 in the ambient air. The designation is made under the provisions of 40 CFR part 53, as amended on July 18, 1997 (62 FR 38764). The newly designated reference method is identified as follows: RFPS–0706–162, Ecotech Pty. Ltd. Model 3000 PM10 High ...


    By Ecotech Pty Ltd

  • USEPA Approval for Ecotech’s High Volume Air Sampler

    The US EPA has announced the designation of Ecotech’s HVS3000 High Volume Air Sampler as a new reference method for measuring concentrations of PM10 in the ambient air. The designation is made under the provisions of 40 CFR part 53, as amended on July 18, 1997 (62 FR 38764). The newly designated reference method is identified as follows: RFPS–0706–162, Ecotech Pty. Ltd. Model 3000 PM10 High ...


    By American Innovations (AI)

  • ASTM D3268 - 91(2011) standard test method for separation and collection of particulate and gaseous fluorides in the atmosphere (Sodium bicarbonate-coated glass tube and particulate filter method)

    The sodium bicarbonate coated tube filter method provides a means of separating and collecting atmospheric gaseous fluoride and particulate fluoride samples. Since the samples are collected on the dry tube and filter, the fluoride may be eluted with a small volume of eluant (see Section 10 for specific instructions on fluoride elution). Elution into a small volume and the sensitivity of the ...


    By ASTM International

  • Sierra BG 3 partial flow dilution sampler now legal alternative for US EPA Part 1065

    The US EPA has ruled that Partial Flow Dilution (PFD) technology, as demonstrated in conclusive testing with Sierra Instrument’s BG®3 <http://www.sierrainstruments.com/emissions/bg3.html> , is now legally recognized as an alternative to traditional Constant Volume Sampling (CVS). The new ruling in favor of light and heavy duty ...


    By Sierra Instruments, Inc.

  • New calibrator for temperature flow & pressure

    Quantitech has launched a new hand-held calibrator; the TCR Tecora Flowcal, which has been developed to enable the fast, accurate calibration of high volume air samplers. Traceable to UKAS standards, the Flowcal provides a convenient and highly accurate method with which to check the performance of air samplers such as the ECHO ambient air particulate sampler. The Flowcal is able to operate ...


    By Quantitech Ltd

  • Casella ETI Appointed by Digitel as UK & Ireland Distributor

    Casella ETI, the UK's leading manufacturer of air quality, pollution detection and industrial emissions monitoring equipment, has been appointed by DIGITEL - Swiss air pollution measurement experts, as their United Kingdom and Ireland distributor. DIGITEL, the Swiss specialist for automatic aerosol, gas and wet-only samplers, has been manufacturing for over 35 years and specialises in High ...


    By Casella

  • Standing room only at FTIR workshop

    The Quantitech workshop on FTIR gas analysis at AQE 2013 was completely full, with many attendees forced to stand outside the entrance. Commenting on the appeal of this event, Quantitech’s Dominic Duggan said: “FTIR can measure almost any gas in almost any application, so anyone with an interest in three or more gases will need to know about FTIR.” About half of the workshop ...


    By Quantitech Ltd

  • Ecotech enters 2006 Australian Export Awards National Finals

      Ecotech is a national finalist in the Small to Medium Manufacturer Award category of the 2006 Australian Export Awards after winning its State-based Award. Ecotech is an Australian owned ISO 9001/14001 and NATA accredited company with over 30 years experience in the design, manufacture, integration, installation, maintenance and operation of turn-key ambient air and emissions monitoring ...


    By Ecotech Pty Ltd

  • Air Monitors launches nanoparticle detector

    Traditional methods for measuring airborne particulate matter measure particle mass per unit air volume, usually with an upper size limit of x microns (PMx etc.). However, from a human health perspective, the particles of most interest are those that penetrate deep into the lungs. For this reason, Air Monitors has launched the Naneos Partector nanoparticle detector in the UK. The Swiss made ...


    By Air Monitors Ltd.

  • Casella ETI Shows How to Monitor Air Quality at MCERTS 2007

    Casella ETI, a leading supplier of air quality and emission monitoring instruments will display a broad range of specialist instrumentation at this year’s MCERTS Exhibition at the Bretby Conference Centre in Bretby, Staffordshire on the 25th and 26th April 2007. The range includes the MCERTS approved Casella Monitor ambient air quality analysers for CO, O3, NOx & SO2, along with its new ...


    By Casella

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you