pellet mill News

  • C900 Pellet Mill Fully Loaded

    The Van Aarsen pellet mill is well known in the market but remains a machine open to interesting developments especially where energy savings, easier maintenance and higher level of automation are concerned. The Compact 900XL model on exhibition at the Victam Europe 2007 demonstrated the latest breakthroughs in pellet mill technology. Many people took a closer look at our pellet mill and in ...

  • Fote New Sawdust Pellet Mill/Sawdust Pellet Mill/Sawdust Pellet Making Machine

    Fote New Sawdust Pellet Mill, Sawdust Pellet Mill, Sawdust Pellet Making MachineBrief Introduction to Sawdust Pellet Mill ...

  • New pellet press OGM-2

    Radviliskis machine factory is finally almost ready to present new pellet press OGM-2. This press is going to be universal - same as his predecessor OGM-1,5A. At the moment press is till in test stadium, but we hope this year we will be able to make tests in "real world" with some very first customer. At the moment this press makes up to 1,7 tons of straw pellet per hour. With this press we also ...

  • BBI International to Release U.S., Canada Pellet Map

    BBI International's Pellet Mill Magazine has completed its 2012 U.S. & Canada Pellet Mill Map, which contains data pertaining to more than 170 fuel pellet production facilities operational, idle, under construction or proposed. In the U.S., Pellet Mill Magazine editors confirmed the status of 134 pellet plants, four of which are currently idle with a combined capacity of 172,000 tons. Three ...


    By BBI International

  • Conquering the world, one small-scale pellets unit at a time

    “After the first World Bioenergy fair in 2004 I had about 20 units in operation in Sweden and there were many people who didn’t believe in my concept of small-scale pellets production,” Mikael Wallin says with a smile. “Now we have 140 units operating all over the world. The latest countries to receive a visit from Sweden Power Chippers were Canada and New ...


    By Elmia AB

  • Vyborgskaya Cellulose and Ekman & Co collaborate on the world's largest wood pellet plant

    Vyborgskaya Cellulose is building the world's largest wood pellet plant at its facility in Russia near the border with Finland. Production capacity will be over 900,000 tons per year. Construction of the plant is underway and production is planned ...


    By Thomson Reuters

  • AMETEK Land to Showcase Biomass Spontaneous Heating and Combustion Detection Technology at Pellet Fuels Institute Conference

    The conference highlights the various applications for densified biomass, as well as trends and best practices within the woody biomass industry. The conference attracts a broad range of individuals from the public and private sectors, academia, and local, state and national governments from North America and beyond.   “With their many desirable characteristics, biomass fuels, ...


    By AMETEK Land

  • New maps reveal Enviva’s Ahoskie wood pellet facility threatens southern wetland forests, surrounding ecosystems and wildlife

    New maps and a report released today by the Natural Resources Defense Council (NRDC) and Dogwood Alliance reveal the ecological threat a major wood pellet manufacturing mill in Ahoskie, North Carolina, poses to surrounding endangered forests. The facility, operated by the South’s largest exporter of wood pellets, Enviva, produces approximately 400,000 tons of wood pellets per year to ship ...

  • Metso-supplied Finland´s largest pellet-fired heating plant produces environmentally friendly energy in Tampere

    /www.w3.org/1999/xhtml">Metso-supplied Finland's largest pellet-fired heating plant produces environmentally friendly energy in Tampere Metso Corporation's press release on May 16, 2013 at 11:00 a.m. local time Finland's largest pellet-fired heating plant, which was supplied by Metso to Tampereen Energiantuotanto Oy, Tampere, is based on a technological solution that is the ...


    By Metso Corporation

  • The updating of biofuel factory in Zhytomyr region

    The customer is the owner of woodworking plant who has set the task for the specialists of ICK Group to increase the productivity of the factory for pellets production. According to customer's words the main need for change was due to unsatisfactory operation of old pellet mills that were installed at the factory: only two of three pellet mills, at best, were constantly in operation, more often ...


    By ICK GROUP

  • Spare Parts

    Screw Conditioner Conditioner is in fact a screw blender where additives such as steam and other liquids can be added to the material mixture prior to entering the pelletizing chamber. Conditioner plays important roles as the following reasons: 1. Lubricate the material for faster production rate and reducing energy cost. 2. To extend die life by avoiding ...


    By Allance Pellet Machinery

  • CPM Roll Speed Measurement

    CPM developed and tested the pellet mill roller speed measurement successfully. In combination with our famous automatic roller adjust type Lineator, it provides additional information for pelleting management which we did not see before: Automatic “zero - positioning” rollers Improved steam addition control Substantial manipulation of pellet ...


    By CPM Europe BV

  • M.A.X. subsidiary VECOPLAN AG receives the largest order in the company’s history

    VECOPLAN environmental technology sector received an order with a budget of about 20 million euros. This represents the biggest business deal, not only in the company history of VECOPLAN, but also one of the most important individual orders for M.A.X. Automation. VECOPLAN will provide relevant equipment for a pellet plant with a planned annual capacity of around one million tons of pellets for ...


    By Vecoplan AG

  • Questions you should think about

    A feed milling process seems to be simple allthough a good process flow depends on a lot of parameters. Below you can see some detailed questions about the process which will not all be easy to answer. This, just to make sure you'll take a considerable thought about these matters and reflect them to your own situation. Do you have problems with answering these or you want to know more about these ...

  • Jeffrey Rader Corporation selected as supplier of Alternative Fuel Boiler Feed System

    Woodruff, SC - Jeffrey Rader Corporation, a leading equipment supplier of material handling equipment to the energy and forest products industries, has been awarded a significant contract to supply an alternative fuel material handling and boiler feed system in Jeonju, South Korea. The system will be part of a 100MW cogeneration plant that will supply power and process steam for the Korean ...


    By TerraSource Global

  • Resurgence in global wood production

    Global production of all major wood products is showing its largest growth since the global economic downturn of 2008-2009, according to new data published by FAO today. In 2014, growth in wood products, including industrial roundwood, sawnwood, wood-based panels and pulp and paper, ranged from 1 to 5 percent, ...

  • Eldorado Brasil achieves further production world record and sets global environmental benchmarks

    After having achieved world record pulp production of 5,156 tons per day at the end of March 2014, the Eldorado Brasil pulp mill in Três Lagoas, Brazil, again set a new world record with ANDRITZ technologies in August 2014. On August 30, Eldorado Brasil produced 5,300 tons of pulp within a single day. This means a specific drying capacity in the range of 400 tons per day and per meter of ...

  • Oil Lubricated Rollers

    CPM-Europe has developed a revolutionary oil-based lubrication system for the rollers of the pellet mill. This newly developed system has a number of benefits that offer significantly lower operational cost compared to regular grease-lubricated rollers, as well as strongly improved process control. Technical description The oil-based lubrication system is a system using ...


    By CPM Europe BV

  • Morbark introduces Biomass Microchipper

    Morbark, Inc., is excited to announce its redesigned 40/36 Whole Tree MicroChipper. This is the latest in design enhancements to make the machine perfect for micro-chip producers. The 40/36 Whole Tree Drum Chipper was first introduced in 2008 as a compact, affordable and productive biomass chipper. The model was improved by the addition of the Advantage 3 high performance chipping drum in 2011, ...


  • Road Repairs Utilizing 100% Recycled Material

    Phoenix Industries has recently completed a 3 week pilot project demonstrating their model MP300 mobile pot hole repair unit utilizing hot mix produced with 100% recycled asphalt product (RAP). The repairs were performed on the NovaDutra toll road that links the cities of Rio de Janeiro and Sao Paulo. This is one of the busiest highways in Brazil and caries approximately 60 percent of the ...


    By Phoenix Industries, LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you