pelleting press News
-
First project in Romania
JSC "Radviliskis machine factory" finished first installation of wood drying - pelletising plant in Romania. This is a joint project with our partner/representer in Romania "Kenobi SRL" - this company is manufacturer of rotary dryers for woodchips and sawdust. Our factory team was responsible for supervision of pellet press OGM-1,5A assembly and starting/training works. The capacity of 1700 ...
-
New pellet press OGM-2
Radviliskis machine factory is finally almost ready to present new pellet press OGM-2. This press is going to be universal - same as his predecessor OGM-1,5A. At the moment press is till in test stadium, but we hope this year we will be able to make tests in "real world" with some very first customer. At the moment this press makes up to 1,7 tons of straw pellet per hour. With this press we also ...
-
First project in Romania
JSC "Radviliskis machine factory" finished first installation of wood drying - pelletising plant in Romania. This is a joint project with our partner/representer in Romania "Kenobi SRL" - this company is manufacturer of rotary dryers for woodchips and sawdust. Our factory team was responsible for supervision of pellet press OGM-1,5A assembly and starting/training works. The capacity of 1700 ...
-
The Crown Expander: Pelleting without a Pelleting Press
Our customers operate more than 600 expanders worldwide. In the U.S.A. for example, turkey fattening feed is expanded before pelleting in most cases. The annular gap expander has proved to be a good solution also in other fields such as starch modification or the oilseeds-processing industry. And last but not least, we have developed our Kahl extruder on the basis of the expander. With the ...
-
Conquering the world, one small-scale pellets unit at a time
“After the first World Bioenergy fair in 2004 I had about 20 units in operation in Sweden and there were many people who didn’t believe in my concept of small-scale pellets production,” Mikael Wallin says with a smile. “Now we have 140 units operating all over the world. The latest countries to receive a visit from Sweden Power Chippers were Canada and New Zealand.” ...
By Elmia AB
-
Our machines on the high seas
Two M700/1-900 single-shaft shredders are installed on the cruise ship M/V Celebrity APEX. Two new single-shaft shredders M700 / 1-900 have left our production. The shredders are installed on the cruise ship M/V Celebrity APEX in order to process and shred various waste (throughput between 400-600 kg / h - depending on the type and nature of the material). The shredded material is then ...
-
Compaction of saw dust and wood shavings from wood waste
For more than 60 years the company AMANDUS KAHL has built pelleting presses, which proved to be successful due to their robust construction, their economic efficiency, and their smooth running performance. Our machines are extremely suitable for compacting a large variety of products. As for the pelleting of dried beet pulp in sugar beet factories, Amandus Kahl has been market leader in ...
-
Electric Flat Die Feed Pellet Machine Manufacturer
Electric feed pellet machine is widely used in the animal husbandry industry in rabbits, chickens, ducks, geese, fish, pigs, aquatic products ect., large and medium-sized breeding plants, feed mills, and organic waste re-pelletization in brewing, sugar, paper, medicine, tobacco, and other industries. Zhengzhou Fusmar machinery is a professional electric flat die feed pellet machine manufacturer, ...
-
Demonstration of the pelleting plant at the machine ring Arnstein
Mobile pelleting plant Farmers have pellets pressed as bedding and for heating MR Arnstein eV has been organizing the use of a mobile straw pelleting system for four years - first in its own ring area, then in the whole of Lower Franconia. Farmers use the pellets here as bedding and fuel. Ever since Herbert Krückel started laying hens on his organic farm, he has been using straw pellets ...
-
How To Improve The Output Of Feed Pellet Machine
Many users face the problems of low output, high wear, and high cost when using the feed pellet mill for the first time. No matter what the feed pellet machine equipment, we all hope that a higher output and the better. Zhengzhou Fusmar Machinery is a professional feed pellet machine manufacturer. After years of customer feedback and practical experience, summarized the following methods to ...
-
Portable XRF for soil and waste screening
The new xSORT hand-held XRF spectrometer from SPECTRO Analytical Instruments can achieve laboratory-quality analysis on soil and waste samples. Laboratory analysis by X-ray Fluorescence Spectrometry has been an accepted technique for the analysis of such materials for many years and was given official approval by European Standard EN 15309:2007. Using the simple sampling procedures described in ...
-
AMANDUS KAHL Supplies plants for Pelleting Waste Fractions to a Company in Northern Germany
Around 500 flat die pellet mills are in operation on the international market for the production of feedstuff, food, chemical and pharmaceutical products and alternative fuels from various raw materials. From the beginning of 2021, four more flat die pellet mills will be used by the industry for the production of alternative fuels from waste fractions - and all of them will be located in ...
-
WBA Press release: New pellet factsheet launched
WBA is pleased to announce the launch of the fact sheet: Pellets – a fast growing energy carrier. The pellet factsheet is the 6th in a series of documents intended to be utilized by the media and industry as verifiable, easily referenced source of information. This factsheet provides an overview of pellets, their properties, production of pellets in large and small scale technologies, ...
-
Choose A Feed Pellet Machine For Your Farm
Zhengzhou Fumar Machinery is a professional animal feed pellet machine manufacturer, this article will introduce the feed pellet machine in detail. Animal feed pellet machine belongs to feed pelletization equipment, is a feed processing machinery that uses corn, soybean meal, straw, grass, rice husk, and other crushing materials directly pressed pellets. The reason for making feed pellets is that ...
-
Olympus Launches Next-Generation XRD with New SwiftMin Software for Real-Time Onboard Quantitative Mineralogy and Phase Analysis
Portable TERRA™ II and Benchtop BTX™ III mobile XRD analyzers offer SwiftMin automated quantitative XRD software, a streamlined user interface, preprogrammed calibrations and an improved X-ray detector for increased productivity without the need for a technical expert. The Olympus next-generation TERRA™ II and BTX™ III mobile X-ray diffraction (XRD) analyzers offer faster ...
-
Why Choose Flat Die Pellet Machine
If you are interested in the homemade pellet mill, please read this article. Why Choose Flat Die Pellet Machine Our company Fusmar is a professional flat die pellet machine manufacturer, This machine is specially designed for poultry breeding and small feed farm. It can make corn, wheat, rice, and soybean, ect into the feed of pig, cow, sheep, rabbit, chicken, duck, fish and so on. It is mainly ...
-
Making fuel for exploring space
Since its 1977 launch, NASA’s Voyager 1 spacecraft has travelled farther than any other piece of human technology. It is also the only human-made object to have entered interstellar space. More recently, the agency’s New Horizons mission flew past Pluto on July 14, giving us our first close-up look at the dwarf planet. For the longevity of these missions we can thank the isotope ...
-
Entsorga-Enteco 2006 – more international than ever before
Exhibitors highlight strong international interest and high visitor quality Satisfied faces all around at the close of the Entsorga-Enteco 2006 trade fair. From 24 to 27 October 2006, 910 exhibitors from 28 countries pre-sented their environmental products and services to a specialist interna-tional public. Exhibitors and visitors were enthusiastic about the offers on display and the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you