personal air sampling News

  • Personal Biological Air Sampler

    ARELCO ARC announces the availability of a new biological air sampler CIP10 M for individual or dedicated sampling. The micro organisms are collected on a liquid which is maintained in a rotating cup which generates a helicoidal air flowrate. The lab analysis (enumeration or identification technique) of the liquid determines micro biological air quality (bacteria, fungi, mould or endotoxin...) ...

  • ARELCO announces Personal Bio Sampler

    ARELCO ARC announces the availability of a new biological air sampler CIP10 M for individual or dedicated sampling. The micro organisms are collected on a liquid which is maintained in a rotating cup which generates a helicoidal air flowrate. The lab analysis (enumeration or identification technique) of the liquid determines micro biological air quality (bacteria like legionela and listeria, ...

  • Casella intrinsically safe Tuff Personal Air Sampling Pump and dBadge Sound Level Meter are a hit down under with Australian Department of Defence

    Following a competitive tender process, the Australian Department of Defence has taken delivery of 180 TUFF personal air sampling pumps and 180 CEL-350 dBadge personal noise dosimeters from Casella CEL (www.casellameasurement.com; 01234 844100), leading global specialist in industrial hygiene and occupational health monitoring equipment. Ronald Azar, ...


    By Casella

  • ASTM D5337 - 11 Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps

    Most occupational exposure assessment methods require the use of personal sampling pumps to collect air samples at typical workplace sampling rates, with sampling volumes specified by (a) particular procedure(s). The precision and bias of these methods are directly affected by the precision and bias of the pumps used to measure the air ...


    By ASTM International

  • ASTM E2144 - 11 Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres

    Endotoxins in metalworking fluid aerosols present potential respiratory health hazards to workers who inhale them. Therefore, a consensus standard is needed to provide reliable data on workplace airborne endotoxin concentrations where metalworking fluids are used. This practice for measuring airborne endotoxin concentrations in metalworking fluid atmospheres will ...


    By ASTM International

  • Personal exposure monitors help specify health impacts of indoor, outdoor air quality

    Indoor and outdoor pollutants can adversely affect the heart in ways different from outdoor air pollution alone, according to a new cardiovascular study conducted by researchers at the University of Michigan, in collaboration with an exposure study conducted by RTI International. The Cardiovascular Sub-Study of the Detroit Exposure and Aerosol Research Study (DEARS) has shown for the first time ...


    By RTI International

  • Casella Launches New Apex Lite Air Sampling Pump

    Casella Measurement Ltd, the UK's most comprehensive manufacturer and provider of environmental services and technologies, launches the Apex Lite, a new member of the market leading Apex Personal Sampling Pump range for measuring dusts, fumes, gases, vapours and VOC's (Volatile Organic Compound). In addition to offering the same operational specification as the Apex standard units, the Apex ...


    By Casella

  • Sensidyne Exhibits Cutting Edge Air Sampling Solutions at AIHce

    Sensidyne, LP, a leading supplier and manufacturer of industrial health and safety instrumentation and accessories will exhibit the company's products in booth 1135 at the American Industrial Hygiene Conference and Expo (AIHce) May 16 - 18, 2011. The American Industrial Hygiene Association (AIHA) and the American Conference of Governmental Industrial Hygienists (ACGIH) jointly host this ...


    By Sensidyne

  • Mold and Bacteria Contamination in Personal Care Product Prompts FDA Recall

    Westone Laboratories, Inc. has announced the recall of all sizes and packaging configurations of Oto-Ease® ear lubricant due to its potential contamination of pathogenic bacteria and mold. Oto-Ease is an ear lubricant used for easing the insertion of custom ear molds and hearing aids.  Although no injuries or illnesses have yet been reported, the recalled product could potentially cause ...


    By EMSL Analytical, Inc.

  • Fast uptake Nitrogen dioxide and VOC monitoring using passive sampling techniques - Rapid Air Monitors

    Leading supplier of air pollution monitoring equipment, Gradko Environmental, is pleased to announce the first products in its new range of Rapid Air Monitors. Environmental consultants globally have been looking for faster passive methods of measuring ambient air pollution, particularly for inorganic compounds. Gradko have responded to this market need with the introduction of the Rapid Air ...


    By Gradko International Ltd

  • New Odor Sampling Procedure for high humidity air flow from food or feed dryers/coolers

    Special odour sampling procedure with nitrogen dilution has been developed by Uniqair and Purdue University Odor Lab for odour samples with high humidity from dryers and coolers. The nitrogen will preserve the odor and prevent condensation for more accurate odor concentration test results. Unlike VOC testing, the odour lab is utilizing human noses of screened panel members with odor sensing ...


    By Uniqair Technologies Ltd.

  • New Odor Sampling Procedure for high humidity air flow from food or feed dryers/coolers

    Special odor sampling procedure with nitrogen dilution has been developed by Uniqair and Purdue University Odor Lab for odor samples with high humidity from dryers and coolers. The nitrogen will preserve the odor and prevent condensation for more accurate odor concentration test results. Unlike VOC testing, the odor lab is utilizing human noses of screened panel members with odor sensing ...


    By Uniqair Technologies Ltd.

  • Minnesota Mold Testing Lab Holds Sampling Workshop

    EMSL will be holding a workshop in Minneapolis, Minnesota regarding Indoor Air Quality and Industrial Hygiene. The workshop will be held on August 15th, 2013 at the Crowne Plaza Northstar Hotel located at 618 Second Avenue South, Minneapolis, MN. 55402. Registration begins at 8:30AM with the workshop being held from 9:00AM to 5:00PM at a cost of $299 per person. The workshop will ...


    By EMSL Analytical, Inc.

  • Air Monitors sponsors air quality PhD

    The instrumentation company Air Monitors has announced that it is sponsoring a new PhD project at King's College London to study ambient levels of Black Carbon. Applications for this important post must be posted online to the KCL Health School by Friday 2nd December. Air Monitors' MD Jim Mills said: "This is a fantastic opportunity to become involved in one of today's most important air quality ...


    By Air Monitors Ltd.

  • Quantitative Passive Air Samplers

    While monitoring air quality is important in many situations, a variety of different quantitative passive samplers are available for such work. A proposed new ASTM International standard, WK45755, Guide for Selection of Quantitative Passive Samplers for Volatile Organic Compounds in Air, will help users decide which air sampler type will ...


    By ASTM International

  • Air Monitors launches nanoparticle detector

    Traditional methods for measuring airborne particulate matter measure particle mass per unit air volume, usually with an upper size limit of x microns (PMx etc.). However, from a human health perspective, the particles of most interest are those that penetrate deep into the lungs. For this reason, Air Monitors has launched the Naneos Partector nanoparticle detector in the UK. The Swiss made ...


    By Air Monitors Ltd.

  • U.S. Indoor Air Quality Market

    Reportlinker.com announces that a new market research report is available in its catalogue: U.S. Indoor Air Quality Market http://www.reportlinker.com/p0958093/US-Indoor-Air-Quality-Market.html#utm_source=prnewswire&utm_medium=pr&utm_campaign=HVAC INTRODUCTION ...


    By ReportLinker

  • Core Sampling Phase of Engineering Survey to Begin Week of Jan. 13 at West Lake Landfill Superfund Site in Bridgeton, Mo.

    Contractors working under the oversight of EPA Region 7 will begin a new core sampling phase of an engineering survey during the week of January 13 at the West Lake Landfill Superfund Site in Bridgeton, Mo. The survey will examine the area between Bridgeton Sanitary Landfill and West Lake Landfill to locate radiologically-impacted material that may be present and identify the location for future ...

  • Casella HazVac unit ensures rapid safe Hazmat sampling at chemical spills and incidents

    Responding to increased demand for frontline emergency response to civil, terrorist and military-related chemical incidents , Casella CEL, in conjunction with Casella Fire Science, have developed and deployed air sampling units with an internal pump that safely collects grab samples of toxic gases and vapours for rapid chemical analysis. ...


    By Casella

  • Casella HazVac unit ensures rapid safe Hazmat sampling at chemical spills and incidents

    Responding to increased demand for frontline emergency response to civil, terrorist and military-related chemical incidents , Casella CEL, in conjunction with Casella Fire Science, have developed and deployed air sampling units with an internal pump that safely collects grab samples of toxic gases and vapours for rapid chemical analysis. ...


    By Casella

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you