pipe bending News

  • UPDATED PIPES AND BENDS BROCHURE

    Abresist Corporation provides information on a new product in an updated Pipes and Bends brochure. Information on Abresist Corporation’s KALFLEX Flexible Wear Resistant Pipe System has been added to this brochure which details abrasion resistant linings for pipes and bends in pneumatic and hydraulic conveying systems dealing with abrasive materials and wear. The literature features ...

  • Manufacturing Process of ELbow-Hot Forming

     One of the most common manufacturing methods for manufacturing Elbows from pipes. After heating the raw material, it is pushed over a die called "mandrel" which allows the pipe to expand and bend simultaneously. Applicable to a wide size range. Elbows of steel pipe joints are used in the industrial plants and are mainly manufactured by the hot mandrel bending from raw material of straight ...

  • Effect of Alloying Elements of Stainless Steel

    Pipe Fittings Manufacturer in India | Flanges Manufacturer in India ALUMINIUM Increases resistance to oxidation at high temperatures, reducing oxide formation (scaling). Combined with nickel it forms an intermetallic compound useful for precipitation hardening. Stainless Steel Investment Casting Fittings Manufacturer in India ...


    By Metline Industries

  • Major investment in ATEX crawlers and push-rods

    Responding to increased market demand for equipment that is certified for use in potentially explosive environments (ATEX), Ashtead Technology has become one of the first rental companies to heavily invest in the latest ATEX certified remote control crawlers and push-rod cameras. “We have received a large number of requests for these specialised systems in recent months from a wide range of ...


    By Ashtead Technology Ltd

  • The Technique Connection Way of HDPE Pipe and Its Fittings

    The Technique Connection Way of HDPE Pipe and Its Fittings If you have purchased the HDPE pipe and HDPE bend and HDPE tee and the other fittings, the following connection advise can be used in your installation process. First,you can butt fusion connect the hdpe bend and hdpe tee and then after this,you can connect the HDPE pipes on the fittings,it's very ...

  • Tailor Made Fabrication

    UTS Engineering recently designed and manufactured a tailor made fabrication for this flanged pipeline. Our experienced site engineer measured the pipeline and communicated the findings to our design and development team; where a flanged spigot pipe, complete with offset bend was designed. Following the survey a 3D model of the fabrication was created in situ to ensure alignment was correct. The ...


    By UTS Engineering Ltd

  • What Is A Pipe Wrench And Using Tips

    According to Wikipedia, Pipe wrench is an adjustable wrench/spanner used for turning soft iron pipes and fittings with a rounded surface. The design of the adjustable jaw allows it to lock in the frame, such that any forward pressure on the handle tends to pull the jaws tighter together. Teeth angled in the direction of turn dig into the soft pipe. Pipe Wrenches are usually used to grasp pipes ...

  • Kummert Inspektionssysteme presents camera with turning capabilties at IFAT - and proves to be a complete success

    At the IFAT, the 15th International Trade Fair for Water - Sewage - Refuse – Recycling, Kummert Inspektionssysteme presented the new flexible camera “CamFlex”, designed for inspections of branching pipe systems, along with other product innovations.Held at the New Munich Trade Fair Centre, the world’s largest and most important trade fair for environmental technologies took place from May 5th – ...


    By Kummert GmbH

  • New: Software with fully automated 3D pipe plan development

    Kummert Inspektionssysteme plans to place innovative sewer assessment software on the market alongside applications already established for the development of 3D pipe plans for branching pipe and sewer systems. With a few mouse clicks and without manual data entry, can3D generates three-dimensional plans of pipe systems as easy as 1-2-3. In connection with the base unit CamMobile Profi II and ...


    By Kummert GmbH

  • ASTM A369 / A369M - 11 standard specification for carbon and ferritic alloy steel forged and bored pipe for high-temperature service

    This guide specifies standard specification for heavy-wall carbon and alloy steel pipe made from turned and bored forgings and is intended for high-temperature service. Heat and product analysis shall be conducted on several grades of ferritic steels, wherein the material shall conform to the required chemical composition for carbon, manganese, phosphorus, sulfur, ...


    By ASTM International

  • Industry Knowledge: What is Directional Drilling?

    Directional drilling is defined as the practice of controlling the direction and deviation of a wellbore to a predetermined underground target or location. The term is also used as a catch-all for the method of drilling for oil or gas or for installing underground utilities in which special assemblies are used to drill at any angle and around obstacles. At ...

  • ASTM A106 / A106M - 11 standard specification for seamless carbon steel pipe for high-temperature service

    This specification covers carbon steel pipe for high-temperature service. These pipes are suitable for welding, bending, flanging, and similar forming operations. Mechanical testing of the specimens shall include tensile, bending, flattening, hydrostatic and nondestructive electric tests. Specimens undergoing bending tests shall consist of sections cut from a pipe. For flattening tests, the ...


    By ASTM International

  • ASTM A335 / A335M - 11 standard specification for seamless ferritic alloy-steel pipe for high-temperature service

    This specification covers seamless ferritic alloy-steel pipe for high-temperature service. The pipe shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. Grade P2 and P12 steel pipes shall be made by coarse-grain melting practice. The steel material shall conform to chemical composition, tensile property, and hardness ...


    By ASTM International

  • ASTM A660 / A660M - 11 standard specification for centrifugally cast carbon steel pipe for high-temperature service

    This specification covers carbon steel pipe made by the centrifugal casting process intended for use in high-temperature, high-pressure service. This pipe shall be suitable for fusion welding, bending, and other forming operations. Grades for carbon steels shall conform to the required chemical composition for carbon, manganese, phosphorous, sulfur, and silicon. Manufacturing of the ...


    By ASTM International

  • Professional sewer inspection with the CamMobile® line by Kummert

    For all pipe inspections – the products by Kummert GmbH are ideally suited for every occasion. Both in small nominal diameters starting at DN50 and in pipes up to DN300. Whether you need rotate-and-pivot-cameras or cameras navigating laterals – with the inspection systems by Kummert GmbH, no pipe run will remain undetected. Special emphasis should be placed on the two inspection systems Compact ...


    By Kummert GmbH

  • 5.4 percent higher efficiency thanks to new manufacturing technology

    Since early 2012 the Austrian solar heating expert TiSUN has been producing its absorbers with a unique manufacturing process. The “Austrian Institute of Technology” has now confirmed an increase in efficiency of more than five percent for the new TiSUN FM module collectors. The FM module collectors are in the top ranks in a worldwide comparison in the field of collector ...


    By TiSUN GmbH

  • Cells vs Probes for Process Analysis - Spectroscopy Guides

    Specac have designed fibre optic probe systems since the 1980s. Our first probe patents date from 1991. So why are we such strong advocates for using cells in on-line process applications? It is first important to fully understand the difference between the two. ...


    By Specac Limited

  • Rotating Line Moles expand pipe cleaning options

    A new family of Rotating Line Moles (RLM) from NLB gives users more than 40 choices to clean pipes and tubes with high-pressure water.  Designed for tubes with diameters from 0.5 inches to 1.5 inches (1.27 cm to 3.81 cm), they feature operating pressures of 10,000 psi or 20,000 psi (700 bar or 1,400 bar).  A variety of flows and nozzle patterns lets users create the most effective ...


    By NLB Corp.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you