plastic granulator News

  • Mechanical Dryer for surface drying of plastic flakes & plastic granulates

    Neue Herbold - mechanical Dryer TM Series are used as a downstream component after a washing process. It is used for surface drying of the material fraction primarily for film flakes, granulate from PET bottles and other rigid types of plastics. Technique The wet material fraction is fed into the upper hopper located on the end of the dryer housing. The rotor of the mechanical ...

  • Neue Herbold Pulverizers for plastic granules / fine grinding plants

    Neue Herbold ZM series pulverizers (pulverisers) are designed for the pulverizing of mid-hard, brittle to high impact plastics that require the final material to be in powder form. Typical applications are PE, PVC, PC and other various types of plastics. The required pulverizer (pulverisers) input material must be in a granulate form with a maximum size of 6-8 mm (1/4-5/16 in.). For further ...

  • High performance and energy efficient granulation of plastics - `Open Day`

    NUGA AG Kunststoffschneidmühlen, Balgach, Switzerland, has been producing granulators for plastics for more than 20 years. The company started production and sale of the patented CentriCut® granulators eight years ago and these will be presented at Fakuma 2008 to the trade visitors with the slogan “high performance and energy efficient granulation of plastics”. Customers from all continents in ...


    By Nuga Systems AG

  • Universal edge strip granulator

    Cast films and plastic-coated paper sheeting are confectioned by cutting off both of the sheeting edge strips. Irregularities relating to production are thereby eliminated and consistent thickness over the entire width of the sheeting guaranteed. The continuous strips that arise are cut into short pieces with the RC 180 from Hellweg Maschinenbau GmbH & Co. KG, Roetgen. These cuttings can then be ...

  • Copper Wire Granulator, Novel to You?

    Copper Wire Granulator is a kind of excellent waste recycling and environmentally friendly equipment used for granulating waste copper wire and separating the copper from plastic to get the pure copper granule and plastic finally. It also can be called wire granulator / cable granulator / copper ...

  • Increasing efficiency with TRIA granulators and eFACTOR3

    eFACTOR3, headquartered in Charlotte North Carolina, is a complete solutions provider of recycling and waste-to-energy equipment. e3 offers a wide range of machines for the recycling industry including shredding, cleaning, granulating and extruding equipment. e3 Adaptive Blades- Built to Last After our feature on the new e3 Adaptive Blade System in June, ...


    By eFACTOR3 LLC

  • MeWa presents a new granulator series

    The UG series granulators produced by the German manufacturer MeWa Recycling Maschinen und Anlagenbau GmbH stand for high throughputs and reliability, even in the demanding scrap sector. This machine type has now been equipped with numerous new features. Granulators can grind various materials down to pre-defined grain sizes. Areas of application include manufacturing substitute fuels from ...


    By ANDRITZ MeWa GmbH

  • New cable stripper and granulation plant launched

    A cable stripper able to handle wire as fine as 1mm together with a low cost cable granulation system are the latest additions to the JMC range of metal recycling equipment. With these two new products, JMC Recycling Systems of Nottingham, England, claims to provide small and large processors alike with the ability to take advantage of today’s high copper prices. Known as the 1000 Euro Strip, ...


    By JMC Recycling Systems Ltd

  • NEUE HERBOLD - Extension of the SM Granulator Range

      NEUE HERBOLD Maschinen–und Anlagenbau GmbH located in Sinsheim, Germany (www.neue-herbold.com) have extended their SM granulator range by introducing the new SM1000/... machine. The new granulator SM1000/... is completing the upper range of the SM series. This machine has a rotor diameter of 1000mm and will ...

  • Big Push to Recycle Plastic

    Cold extrusion is playing an ever greater part in recycling of waste plastic, and the Department for Business and Enterprise is sponsoring research into development of the machinery necessary for such work. Engineers at Bradford University have built a pilot plant and are running a series of trials with different processes, feed plastics, additives, and final products. Leader of the project, Dr ...


    By Sensor Technology Ltd

  • Railways trial recycled plastic sleepers

    A trial to use recycled plastic sleepers on UK rail networks could lead the way for a national roll out as Network Rail prepares to replace timber sleepers. The trial, due to start this summer, will use recycled plastic versions made from remoulded granulated plastics on rural lines for 18 to 24 months. Network Rail director of engineering Jerry England said: “This is an important scheme for ...

  • Complete 2-stage plastic recycling system available

    A complete 2 stage shredding and granulating system that was built in 2006 and was only run for 3000 hours has come up for sale and we are ready to disassemble and deliver anywhere in the US. The system includes: - Infeed conveyor for shredder- Single shaft shredder, WEIMA Model WLK-15- Shredder discharge and granulator infeed conveyor- Metal detection and separation equipment- Granulator, MPG ...


    By eFACTOR3 LLC

  • New route to reclaiming plastics from ASR

    Researchers have found a new way of separating the different types of shredded plastic parts from end-of-life-vehicles (ELVs). In co-operation with Japanese vehicle manufacturer Toyota and German waste technology specialist Sicon, the Fraunhofer Institute for Process Engineering and Packaging IVV in Freising, Germany, has developed the so-called CreaSolv process. When compressed into granulate, ...


    By Recycling International

  • Plastics firm fined after worker loses fingers

    A plastics recycling firm has been fined GBP£15,000 after a worker had parts of two fingers cut off by a high-speed fan. The employee, who does not wish to be named, was injured as he repaired a drying unit at Roydon Granulation’s recycling facility in St Helens, Rochdale. He suffered serious injuries to four fingers on his left hand including the partial amputation of two while he ...

  • Efactor3 to offer plastics washing, drying system

    The DRD drying and cleaning system from MAS, which will be available in the United States through Efactor3 LLC, Charlotte, N.C., was introduced during the NPE 2009 event in Chicago in June. MAS (Maschinen- und Anlagenbau Schulz GmbH of Austria) says its dry cleaning system “is a well-proven alternative to water washing plants for plastic recycling.” Cleaning is carried out by the DRD (Double ...


    By eFACTOR3 LLC

  • Taylor made washing lines for wet recycling of plastics by NEUE HERBOLD

    NEUE HERBOLD Maschinen- und Anlagenbau GmbH, located in Sinsheim/Germany manufactures and sells complete washing lines for the recycling of plastics waste. Prior to re-pelletizing the plastic waste must be size reduced, washed and if necessary foreign materials separated. NEUE HERBOLD washing lines, produce granules or flakes with a high quality even at today's required outputs. Materials which ...

  • New plastics separation technology increases recovery rates for acoustics material manufacturer

    A manufacturer of acoustics material, such as that found in car boots and bonnets, is recovering more waste material for re-use in new products by using new plastics separation technology. Axion engineering, a division of Axion Consulting, has helped design and install an air-flow separator for Niko Coatings, a manufacturer of acoustic insulation and carpet backing materials. The innovative ...

  • Friction-washer FW series used to wash plastic materials

    ?Applications? The NEUE HERBOLD friction washer FW Series is used to intensively wash plastic materials such as film flakes, granulate to include PET bottle flake and other types of rigid plastics. ...

  • The most efficient plastic sorting system › Bollegraaf Recycling Solutions

    The Appingedam-based company Bollegraaf Recycling Solutions and Daly Plastics, located in Zutphen, have completed the installation of the most efficient and professional industrial plastic sorting system in the Netherlands. The two companies pooled their expertise to create an innovative, modular and fully automatic recycling system. The capacity targets set for the system were exceeded by more ...

  • Stedman`s Grand Slam™ Model 3030H Impactor Reduces Plastic Molded Parts

    Aurora, IN - The Grand Slam™ Model 3030H from Stedman efficiently reduces large pieces of rejected plastic molded parts to an ideal feed size for the granulator. After the granulator, material is then ready to be recycled and re-melted. Originally the large pieces of plastics were sized for the granulator by a band saw. The Model 3030H handles feed sizes up to 25” x 18” x 9” and features an ...


    By Stedman

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you