plastic-to-fuel News

  • UL Environment Selected to Study Feasibility of Plastics Supply and Value Chain in a Circular Economy to Support EU Horizon 2020 Project

    UL Environment, a division of UL (Underwriters Laboratories), a global safety science leader, announced today that it is joining a team led by the Fraunhofer Institute for Reliability and Microintegration (IZM), to support a Horizon 2020 circular economy project in the European Union. The EU Post-Consumer High-Tech Recycled Polymers for a Circular Economy (“PolyCE”) project is a ...


    By UL The WERCS

  • EPA adds sites to Superfund National Priorities List

    The U.S. Environmental Protection Agency added seven sites to the Superfund National Priorities List on August 3 and proposed four more sites to the list. Under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) of 1980, EPA is required to annually revise the list of sites that have known or threatened releases of hazardous substances or contaminants. The EPA ...

  • TOMRA and Cleanaway partnership appointed as network operator for New South Wales container deposit scheme

    Global sensor-based solutions provider TOMRA, and Australian waste management company Cleanaway, have been appointed as the network operator for a new container deposit scheme in New South Wales (NSW), Australia. NSW environment minister Gabrielle Upton announced the new scheme, which will see approximately 800 reverse vending machines installed across the state, contributing to its litter ...


    By TOMRA Sorting GmbH.

  • Geotech announces new BIOMETHANE 3000 analyser

    Biomethane is seen by many as a vitally important part of our energy future, with various quarters keen to urge its long-term deployment.  It’s part of a wider spectrum of renewable energies like biogas that are increasingly coming to the fore as the world strives for a more diversified and sustainable energy mix. Though oil and gas prices have been the subject of much falling prices ...


    By Geotech

  • Plans for plants that can turn waste plastic into fuel

    A new plant which turns mixed waste plastics into liquid synthetic fuels is now fully operational in Ireland, with the promise of more similar plants to come in the UK and throughout Europe. Cynar Recycling’s first plant in Portlaoise, Ireland can process up to 20 tonnes of waste plastics per day, producing up to 19,000 litres of fuel products at a conversion rate of 95%. The plant uses a ...

  • Plastics Manufacturer Warns Companies about New Fuel Tank CARB and EPA Regulations

    Flambeau Fluid Systems, a leading plastics manufacturer of fuel ...


  • Italy customer set up successfully waste plastic to fuel oil pyrolysis plant

    Italy customer bought a set of waste plastic to fuel oil pyrolysis plant from Doing company.In spite of the Italy customer can't speak English,he always translated Italian into Enlish by Google to contact with us.When he visit our factory and communicates with our colleagues detailed.With our help ,he get the ...

  • Italy customer set up successfully waste plastic to fuel oil pyrolysis plant

    Italy customer bought a set of waste plastic to fuel oil  pyrolysis plant from Doing company.In spite of the Italy customer can't speak English,he always translated Italian into Enlish by Google to contact with us.When he visit our factory and communicates with our colleagues detailed.With our help ,he get the license in Italy .The Italy customer place the order right now and buy the waste ...

  • Eaton’s advancements in fiber-reinforced plastics providing lighter, stronger materials for more fuel-efficient aircraft

    Diversified industrial manufacturer Eaton Corporation’s advancements in the production of safer, lighter and stronger composite materials are leading the way to significant improvements in weight savings and fuel efficiency for next-generation aircraft. Engineers at Eaton’s Engineering Center in Pune, India, have developed a multi-scale modeling methodology for short-fiber reinforced ...


    By Eaton Corporation

  • Plastic Recycling

    Only 2.5 % of all municipal waste is selectively collected in Poland. Plastic waste comprises around 14 % of all Polish domestic waste, most of it PET. However, only 6% of it is recycled, while in Europe the figure is 45%! PET processing is done by three companies in Poland: Elana PET - part of the capital group Boryszew (produces 120,000 tons of bottles per year), Polowat (18,000 tons per year) ...


  • The ultimate fuel

    In three years a new type of battery may be available, using urine as an energy source. The inventor, Dr Ki Bang Lee (South Korea), has created his own business, K B Lab, in Singapore. He intends to make the batteries himself and/or have other companies develop them under licence. The battery consists of a strip of filter paper containing cupric chloride. A cathode is sandwiched between a ...


  • Temperature Controller for Plastics Applications

    Automated Control Engineering Group (A.C.E.) in partnership with WEST introduce the ...

  • Big Push to Recycle Plastic

    Cold extrusion is playing an ever greater part in recycling of waste plastic, and the Department for Business and Enterprise is sponsoring research into development of the machinery necessary for such work. Engineers at Bradford University have built a pilot plant and are running a series of trials with different processes, feed plastics, additives, and final products. Leader of the project, Dr ...


    By Sensor Technology Ltd

  • Plants: a source of `green` plastics?

    Most plastics are derived from fossil fuels, but new research suggests that soon it may be possible to 'grow' plastics. With around 100 million tonnes of plastics used each year worldwide, finding a renewable and biodegradable source of plastics could help reduce both carbon emissions and landfill waste. Plants have been used to produce plastics for some time, with plastics made from plant ...

  • Mining the sea of plastic

    Earlier this month, two ships sailed from California to study a large patch of the Pacific Ocean, known as the 'plastic vortex,' where maritime currents are causing plastic litter to congregate. Scientists aboard will try to determine how much plastic is in the vortex and its impact on marine life. They will also consider whether it can be recovered. One of the ships is a sailboat named Kaisei; ...


    By GLOBE SERIES

  • Fire retardant plastic sheeting

    Our company recently joined the NFPA (National Fire Protection Association) so we can better understand how we can help our customers protect themselves from the ravages of fire. In the polyethylene industry, Fire Retardant products have been around for a few decades, but have really only come into their own over the past 15 years or so in the USA. Fire Retardant products were much more popular, ...


    By Global Plastic Sheeting

  • Plastic identification codes for recycling

    All over the world, many types of plastic is commonly used. Plastic has been given a numbering category or identification code for the different types so it can be sorted accordingly. Each type of plastic melts at a different temperature and displays different properties. The identification system divides plastic into seven distinct types and uses a number code generally found on the bottom of ...


    By Global Plastic Sheeting

  • Home composting of biodegradable plastics

    ASTM International Committee D20 on Plastics is currently developing a new standard, WK35342, Specification for Home Composting of Biodegradable Plastics. The proposed standard is under the jurisdiction of Subcommittee D20.96 on Environmentally Degradable Plastics and ...


    By ASTM International

  • Plastic recycling: future potential

    At the conference on the future of plastic recycling, 2009, which was held in Krefeld at the beginning of September, Herbert Snell, vice-president of the Federal Association for Secondary Raw Materials (BVSE), said that the economic crisis had affected the sector, but there is no reason to make a drama out of it. The crisis will not kill off plastic recycling, but provide new opportunities. Snell ...


  • Plastics for Environmental Industry

    Aron srl is the Italian firm with experience in plastic material field. We plan and produce products, solutions and services for Chemical treatment plants, Waste water plants, Oil recovery from oil spills at sea and industrial tanks, Self-cleaning filters, industrial plants. Our products are made out of thermoplastic materials: Oil drum Skimmer pneumatic driven and floating, Automatic Self ...


    By Aron S.r.l.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you