pm2.5 sampling News

  • SM200 receives U.S EPA FEM approval for PM2.5

    On August 16, the U.S EPA notified us that the review of our application for SM200 particulate monitor as Federal Equivalent Method had been completed, and SM200 was approved. To get the PM2.5 approval, five field tests, of about one month each, were conducted at four different locations in the U.S.A. Locations were specifically chosen by the EPA to challenge the SM200 with different types of ...


    By Opsis AB

  • Subway stations with platform sliding doors and good ventilation reduce passengers’ exposure to PM2.5

    Underground trains are among the most widely used public transport systems in cities worldwide. A study investigating the chemical composition and source of particles in Barcelona subway stations found that a new station design, with sliding doors that separate the platform from the tunnel and good ventilation, reduced the concentration of fine particulate matter (PM2.5) by over 50% compared with ...

  • AMS Compacted Soil Sampling Kit

    Save time and energy in soil conditions where soil probes & slide hammers just won’t get the job done! The AMS Compacted Soil Sampler works great for obtaining “composite” soil samples in hard compacted and frozen soils. The 1-1/16” x 21” Flighted Auger with carbide bit may be connected to any ½” chuck drill. The entire unit assembles/disassembles in ...

  • Talk at BOHS - Gilian Air Sampling Pumps

     BOHS - British Occupational Hygiene Society Exhibition   This year Shawcity will be exhibiting at BOHS – The British occupational Hygiene Society Exhibition on stand 5 on 5th-7th April.   On show will be our range of monitoring instrumentation, including the new ToxiRAE Pro and PhoCheck Tiger. ...


    By Shawcity Limited

  • New high performance sample gas cooler

    Bühler Technologies, a leading manufacturer of high quality accessories and systems for the gas analysis, is introducing the PKE 52, a new series of high performance peltier coolers. Depending on the selected heat exchanger, the gas flow can go as high as 500l/h per single stream, or up to 2x 250 l/h per dual stream even under harsh ambient conditions. Analogue to the well known PKE 5 ...


    By Bühler Technologies GmbH

  • The NEW GilAir PLUS - Air Sampling Pump

    The NEW Revolutionary GilAir PLUS The Ultimate Air Sampling pump that delivers greater versatility, superior design and comfort!   The NEW Air Sampling Pump by Gilian is HERE and available at Shawcity Limited. The Launch of the product has been eagerly awaited by many who are keen to use the product in their own workplaces. Shawcity ...


    By Shawcity Limited

  • Distek, Inc. Releases the PrepEngine Sample Prep Station

    North Brunswick, NJ – Distek, Inc., an industry leader in pharmaceutical laboratory testing instruments, accessories and validation services, is excited to release the PrepEngine Sample Prep Station for Content Uniformity. The PrepEngine was co-developed through collaboration between Distek, Inc. and Two Square Science based in Fall River, MA. The result is a 10 station system which ...


    By Distek, Inc.

  • BacTech Begins Tailing Sampling at Telamayu, Bolivia

    BacTech Environmental Corporation ("BacTech" or the "Company"), (CNSX: BAC)(WKN: A1H4TY) announces that it has obtained approval from Corporacion Minera de Bolivia, the state-owned mining company for Bolivia ("COMIBOL") and has begun sampling tailings from the Telamayu mill site in Bolivia. At this stage there is no agreement in place between BacTech and COMIBOL but if the sampling results ...


    By Marketwire

  • Minnesota Mold Testing Lab Holds Sampling Workshop

    EMSL will be holding a workshop in Minneapolis, Minnesota regarding Indoor Air Quality and Industrial Hygiene. The workshop will be held on August 15th, 2013 at the Crowne Plaza Northstar Hotel located at 618 Second Avenue South, Minneapolis, MN. 55402. Registration begins at 8:30AM with the workshop being held from 9:00AM to 5:00PM at a cost of $299 per person. The workshop will ...


    By EMSL Analytical, Inc.

  • Eriez Separate, Detect and Sample at Bauma 2010

    Eriez Magnetics Europe Ltd are exhibiting the latest technology in metal removal, detection and sampling equipment at Bauma to be held in ...


    By Eriez Magnetics Europe Ltd

  • Stir different samples at different speeds on one unit…

    Torrey Pines Scientific Inc has launched a range of multi-position analogue magnetic stirrers with 5 or 9 positions which can be independently controlled for maximum flexibility in one unit. They are available as a magnetic stirrer or as a ...


    By Camlab Limited

  • EMSL analytical offers analysis for USP 797 samples

    EMSL Analytical, a leading provider of laboratory services, recently announced they have begun to analyze samples for USP 797. Issued by the US Pharmacopoeia (USP), USP 797 regulations provide a standard for all pharmacies that prepare ‘compounded sterile preparations’ (CSPs). Most pharmacies must comply with this regulation and many hospitals that operate pharmacies meeting the same criteria are ...


  • ASTM D1485 - 07(2011) Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation

    This practice outlines a procedure for sampling and sample preparation of natural rubber. A statistical method for determining a quality index and lot acceptability is given. The sampling plan is optional for quality control or production, but may be used when needed for referee purposes. 1. Scope 1.1 This practice, intended for referee purposes, covers a uniform ...


    By ASTM International

  • New sample gas probe for operating temperatures up to 280°C

    In the process of extractive gas analysis, it is essential to stabilise the operating temperature of the sample stream above a certain level. If the sample gas would undercut these limits, acids could fall out or chemical reactions could take place, e.g. salt or other crystals may be formed. Unexpected acid condensate could increase the corrosive property of the gas or the precipitation of solids ...


    By Bühler Technologies GmbH

  • Sensidyne Exhibits Cutting Edge Air Sampling Solutions at AIHce

    Sensidyne, LP, a leading supplier and manufacturer of industrial health and safety instrumentation and accessories will exhibit the company's products in booth 1135 at the American Industrial Hygiene Conference and Expo (AIHce) May 16 - 18, 2011. The American Industrial Hygiene Association (AIHA) and the American Conference of Governmental Industrial Hygienists (ACGIH) jointly host this ...


    By Sensidyne

  • Accelerated Technology Laboratories, Inc. Introduces Sample Master® Mobile

    ATL is pleased to announce the addition of Sample Master® Mobile to its product family. By using Sample Master® Mobile, data can be electronically captured and quickly synchronized with Sample Master® Laboratory Information Management System (LIMS), providing increased accuracy, quicker customer turn around times and improved worker productivity. Sample Master® Mobile will eliminate ...

  • Agilent Technologies offers dissolution sampling solution for enhanced laboratory workflow

    Agilent Technologies Inc. (NYSE: A) today introduced the 850-DS Dissolution Sampling Station for centralizing laboratory workflow of sample transfer, filtration and collection. By managing unattended dissolution sampling and automated sample archiving for future HPLC or UV analysis, the 850-DS frees up analysts' time while eliminating errors associated with manual sampling. Building on the ...


    By Agilent Technologies, Inc.

  • ASTM D6009 - 12 Standard Guide for Sampling Waste Piles

    This guide is intended to provide guidance for sampling waste piles. It can be used to obtain samples for waste characterization related to use, treatment, or disposal; to monitor an active pile; to prepare for closure of the waste pile; or to investigate the contents of an abandoned pile. Techniques used to sample include both in-place evaluations of the ...


    By ASTM International

  • Soil removal and Phase 2 lead sampling to begin in Pittsburg, Kan.

    EPA Region 7 and its contractors will start to excavate and remove lead-contaminated soils from approximately 30 properties in Pittsburg, Kan., beginning the week of October 26, 2009. The removal work, which will focus on properties with lead levels of 550 parts per million or greater, is expected to last for several months. As the soil removal work gets underway, EPA will also begin its ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you