Pm2.5 Standard News on Environmental XPRT

IAIA October news

1. Special biodiversity symposium: “Mainstreaming the Mitigation Hierarchy in Impact Assessment” Registration is open through 27 October for a special IAIA biodiversity symposium, “Mainstreaming the Mitigation Hierarchy in Impact Assessment.” Pre-registration and pre-payment by that date is required due ...

Oct. 18, 2017

By International Association for Impact Assessment (IAIA)

U.S. EPA proposes to disapprove California’s air quality plans for South Coast and San Joaquin Valley / agency asks CA to revise PM2.5 plans to better protect health of residents

Today, the U.S. Environmental Protection Agency is proposing to disapprove California’s air quality plans for fine particles - also known as PM2.5 - for failure to achieve adequate emissions reductions in the South Coast and San Joaquin Valley air basins notoriously known for poor air quality. States are required to submit plans to EPA that identify how health-based air quality standards ...

Nov. 9, 2010

By US EPA - Environmental Protection Agency

BAM-1020 accepted as Australian Standard

Ecotech and MetOne announce BAM-1020 inclusion to Australian standards. Ecotech Pty. Ltd. and MetOne Instruments Incorporated are pleased to announce that the BAM-1020 has been approved under Australian Standard AS/NZS 3580.9.11.2008 for the determination of particulate matter, PM10, using Beta attenuation.The BAM-1020 is the currently the only instrument available on the market that has both ...

Jul. 14, 2008

By Ecotech Pty Ltd

A Resource for Environmental Guidelines and Standards

ESdat environmental software have compiled a free resource of environmental guidelines and standards for USA, Canada, Australia, New Zealand, Holland, United Kingdom and Malaysia. They can be opened in Excel, reviewed, and imported directly into ESdat. Users can also compile their own using these as a guide. The online environmental standards provide professionals with links to the publishers, ...

Apr. 24, 2013

By Esdat Environmental Data Software

Fire standards caveats

According to F2.2.1 of Form and Style for ASTM Standards, “Every fire standard shall state its purpose, specify the known limitations of the standard and specify the significance of the data that are gathered (including relevance to human life and property, where appropriate).” This column covers caveats used in fire standards. The three primary types of ASTM International fire ...

May 7, 2012

By ASTM International

Stronger Standards for Smog Proposed

Washington, D.C. - EPA is proposing to strengthen the nation's air quality standards for ground-level ozone, revising the standards for the first time since 1997. The proposal is based on the most recent scientific evidence about the health effects of ozone -- the primary component of smog. 'Advances in science are leading to cleaner skies and healthier lives,' ...

Jun. 21, 2007

By US EPA - Environmental Protection Agency

Sealless pump standards updated

The Hydraulic Institute (HI) has updated the 2000 edition of the ANSI/HI standard on sealless centrifugal pumps and published ANSIHI 5.1-5.6-2010 Sealless Rotodynamic Pumps for Nomenclature, Definitions, Application, Operation and Test. The revised standard covers sealless rotodynamic pumps driven by canned motors or through magnetic couplings with conventional motors. ANSI/HI 5.1 - 5.6-2010 is ...

Nov. 23, 2010

New particulate monitor included on Australian Standards

Ecotech Pty. Ltd. and MetOne Instruments Incorporated are pleased to announce that the BAM-1020 has been approved under Australian Standard AS/NZS 3580.9.11.2008 for the determination of particulate matter, PM10, using Beta attenuation.The BAM-1020 is the currently the only instrument available on the market that has both Australian certification for PM10 and U.S. EPA certification for PM10 and ...

Jul. 10, 2008

By Ecotech Pty Ltd

Deal reached on car emission standards

Representatives of the European parliament and council of ministers have provisionally agreed next generation limits on passenger car pollution. The law will set new Euro 5 standards for fine particles, hydrocarbons and nitrogen oxides (NOx) from 2009, and tougher Euro 6 standards for NOx only from 2014 (EED 07/11/06). In the discussions, the council basically accepted parliament’s proposed ...

Dec. 11, 2006

By Environmental News and Data Services (ENDS)

ASTM E1366 - 11 standard practice for standardized aquatic microcosms: fresh water

A microcosm test is conducted to obtain information concerning toxicity or other effects of a test material on the interactions among three trophic levels (primary, secondary, and detrital) and the competitive interactions within each trophic level. As with ...

Nov. 18, 2011

By ASTM International

Revised ISO 14001 Standard Released

The International Standards Organization (ISO) has released the latest version of ISO 14001, one of the world’s most popular standards for environmental management. ISO 14001:2015, which sets out the requirements for an environmental management standard, is one of the world’s most widely used ...

Sep. 15, 2015

By GLOBE Foundation

Find all the latest environmental standards

Find all the latest environmental standards and guidelines in one handy place. Visit our free resource. Including: USA, Canada, Australia, New Zealand, Holland, UK, and Malaysia. ESdat environmental software have compiled a free resource of environmental guidelines and standards for USA, Canada, Australia, New Zealand, Holland, United Kingdom and Malaysia. They can be opened in Excel, reviewed, ...

Sep. 6, 2016

By Esdat Environmental Data Software

MACT standards for sewage sludge incinerators

EPA announced in the October 14 Federal Register proposed rulemaking to cut emissions of mercury, particle pollution and other harmful pollutants from sewage sludge incinerators (SSIs). According to EPA, SSIs represent the sixth-largest source of mercury air emissions in the U.S. The proposed standards would apply to both multiple-hearth and fluidized bed incinerators. Units incinerating sewage ...

Oct. 14, 2010

By Custom Stack Analysis, LLC.

Decision issued on Iowa`s water quality standards

EPA has approved the Iowa Department of Natural Resources’ (IDNR) designated use changes for 430 water bodies and disapproved proposed changes for 89 water bodies. Designated uses describe the achievable recreational activities and aquatic life uses for Iowa’s waters. “Healthy watersheds provide Iowa communities with safe drinking water, recreational opportunities, environmental ...

Jan. 6, 2012

By US EPA - Environmental Protection Agency

Three times a winner - Twin-XULS sets the standard

Oxford Instruments has recently completed the work necessary for the Twin-XULS to become the only benchtop XRF analyser to conform with an ASTM Method – D 7212, an Energy Institute method IP 351/05 and a reproducibility statement calculated by the US EPA. The Twin-XULS is a benchtop EDXRF spectrometer based on a unique, patented, low background proportional counter detector. Twin-XULS provides ...

Jan. 16, 2006

By Oxford Instruments plc

OSHA proposes to bring its standards up to date

OSHA has proposed a Standards Improvement Project (SIP)-III, to revise and remove requirements within several OSHA standards that are outdated, duplicative or inconsistent. This rulemaking will help keep OSHA standards up-to-date and will help employers better understand their regulatory obligations. For example, OSHA is proposing in SIP-III to update the definition for "potable water" in the ...

Jul. 9, 2010

By The Compliance Center (ICC)

The new generation Delta Blower G5plus sets the standard

The new generation Delta Blower G5plus is the result of the proven concept of our positive displacement blowers. AERZEN has set the standard with the Delta Blower positive displacement blowers, and has now raised the bar even higher in terms of performance, efficiency and environmental awareness. To expand upon the success of the blower series, an exciting new design ...

Jul. 31, 2017

By Aerzener Maschinenfabrik GmbH

Shipping becomes first industry with global climate standard

Shipping has become the first industry to agree a global carbon dioxide reduction strategy. This month’s vote at the International Maritime Organisation approved the establishment of an Energy Efficiency Design Index (EEDI) for new ships. T&E welcomed the decision, but says it cannot be seen as a solution on its own, especially because the EEDI will take many years to be truly ...

Jul. 20, 2011

By Transport and Environment (T&E)

Cities setting standards in eco-innovation - Curitiba, Brazil

Eco-innovation is usually applied to products, not cities. Yet the planning achievements of Curitiba and other cities can indeed be considered eco- innovations. Most people today live in urban areas, and this migration is set to continue. Local authorities are confronted with the harsh realities of environmental problems as the environmental footprints of cities rise. Also inhabitants are ...

May 4, 2011

By GLOBE SERIES

Myths and facts about U.S. EPA standards

WRI experts take closer look at some of the myths, inaccuracies, and misinformation surrounding Environmental Protection Agency regulation of greenhouse gases. In recent months, the debate over U.S. Environmental Protection Agency (EPA) regulations of greenhouse gas emissions took on a heated tone across the country. At the federal level, the Senate voted down several amendments ( ...

Apr. 19, 2011

By World Resources Institute WRI

Subscribe to our eBulletins

Add Supplier Profile