pneumatic waste News

  • Eaton’s Aerospace Facility in Titchfield Honored for Reducing Waste Through Zero Waste-to-Landfill Program

    Eaton is honoring employees at its aerospace facility in Titchfield, U.K., for achieving "zero waste-to-landfill" by nearly eliminating all wastes sent to landfills through strategies such as recycling, re-use and new work processes. Eaton is encouraging its manufacturing sites to achieve zero waste-to-landfill as part of its waste management program and also as a means to reduce the release of ...


    By Eaton Corporation

  • Eaton’s Berea, Ohio Plant Recognized for Reducing Waste, GHG Emissions through Zero Waste-to-Landfill Program

    Power management company Eaton is recognizing its hydraulics facility in Berea, Ohio for achieving “zero waste-to-landfill” by nearly eliminating all wastes sent to landfills through recycling, re-use, new work processes and other means. The Berea plant is the first Eaton facility in Ohio to be recognized for zero waste to landfill. Together, more than 50 Eaton sites around the world ...


    By Eaton Corporation

  • UK waste can supply half renewables energy target by 2020

    April 27 2010 - An award-winning study concludes that energy-from-waste (EfW) technologies can contribute up to 50 percent of the UK renewable energy target by 2020. It states that this will depend on the pace of investment and availability of suitable feedstock. The study won the first Geotech Bursary / CIWM Award.   ...


  • Cleaned tidy!

    By an integrated pneumatic press-in device in the funnel also materials difficult to grip are fed into the cutting unit. The cutting unit ensures efficient and safe destruction of hospital waste. With the spraying device installed, it is possible to wash the aggregates after the shredding process. In this project, the task was to develop a compact version with a few surfaces. It was ...

  • Plastics for Environmental Industry

    Aron srl is the Italian firm with experience in plastic material field. We plan and produce products, solutions and services for Chemical treatment plants, Waste water plants, Oil recovery from oil spills at sea and industrial tanks, Self-cleaning filters, industrial plants. Our products are made out of thermoplastic materials: Oil drum Skimmer pneumatic driven and floating, Automatic Self ...


    By Aron S.r.l.

  • World exclusive product launch at RWM 2013 in Birmingham!

    Presona AB is one of the world’s leading designers and manufacturers of balers with pre-pressing technology for efficient baling of the most varieties of material from paper and plastic to household and industrial waste. The product range also includes pneumatic waste extraction systems for the graphics industry, paper and packaging manufacturers and sorting plants ...


    By Presona AB

  • PHOENIX Process Equipment Co Announces Expanded Belt Filter Press Line

    PHOENIX Process Equipment Co., of Louisville, Kentucky, has announced an expanded line of Model WX Belt Filter Presses. The Model WX is available in several different configurations, each suited to the specific application. Many of its design features were selected particularly for rugged mining and aggregate installations. The basic configuration includes a fully welded mainframe, ...

  • Update of an old Rotor Shear at a incineration plant

    Attero Moerdijk is a large incineration plant for household and bulky waste, processing about 1 million tons of waste per year. Previously a Lindemann rotor shear was used to shred the bulky waste before incineration, but due to high wear and maintenance costs and limited capacity it was taken out of production several years ago. With no shredding facilities on-site, for the past few ...


  • Jeffrey Rader Corporation selected as supplier of Alternative Fuel Boiler Feed System

    Woodruff, SC - Jeffrey Rader Corporation, a leading equipment supplier of material handling equipment to the energy and forest products industries, has been awarded a significant contract to supply an alternative fuel material handling and boiler feed system in Jeonju, South Korea. The system will be part of a 100MW cogeneration plant that will supply power and process steam for the Korean ...


    By TerraSource Global

  • Bag Dumping System with Glove Box, Compactor, Conveyor

    A new Flexicon Bag Dumping System with glove box, bag compactor and flexible screw conveyor, isolates bulk material from the operator and plant environment throughout opening, dumping and compaction of bags, and the conveying of material downstream. Bags are staged on a stainless steel tabletop and then transferred through ...


    By Flexicon Corporation

  • Gee & Co high-tech methanol dosing for Southern Water

    Five sewage treatment works in the Southern Water region are to use sophisticated methanol dosing plant manufactured by Gee & Company and utilising Signal metering pumps for the de-nitrification of final effluent, utilising biological treatment. Procurement of the equipment is being carried out for Southern Water by 4D via Black & Veatch.Methanol, readily available as a high carbon ...

  • ThermaGrid™ RTOs reduce potential for maintenance problems

    McGill AirClean's ThermaGrid regenerative thermal oxidizers (RTOs) use a proprietary gridded-ceramic heat transfer block that controls VOC emissions and other chemical emissions at high-destruction efficiencies with low-energy consumption and minimal maintenance. These RTO systems are available in economical two-bed designs and in three-bed designs for increased VOC removal efficiency. The ...


    By McGill AirClean LLC

  • New Fully Automatic Clean In Place System For Oil In Water Monitors!

    Introducing the new TurnerCIP Fully Automatic Clean In Place System from Turner Designs Hydrocarbon Instruments. Most oilfield produced waters and other oily wastewaters have high fouling potential for optical sensors. High Cost Ultrasonic Cleaning systems only address the local optical path and not the entire sample system. The TurnerCIP (Clean In Place) addresses the entire sample ...

  • The H-type baling press revamped for increased efficiency at a lower cost!

    Thanks to the redesign of our high quality horizontal baling press, we are now able to offer an even more efficient solution at a lower cost. The Horizontal Valvan baling press is fitted with a hydraulic vertical sliding door for smooth and safe operation. It is suited for low capacity waste streams and delivers high density well shaped bales. The H-type baler is available from 150kN up to 600kN ...


    By Valvan Baling Systems NV

  • Shredder Cuts Scrap Size, Volume

    A new Titan 20 Shredder from Munson Machinery reduces the volume of scrap plastics, resins, fibrous products, fiberglass, wood products, paper/cardboard, gypsum wallboard, aluminum, glass, and other industrial, medical and manufacturing waste products by up to 80 percent. The shredder features dual rotors with extended ...

  • Analox care about air at the 2016 Air-Tech exhibition

    Analox attended the Air-Tech 2016 exhibition at the NEC Birmingham in April. The biennial event ran from 12-14 April and featured suppliers from around the world who provide compressed air systems and related equipment. Air power is the second most widely used source of motive energy in the world, preceded by electricity, and the exhibition aims to cater for this ...


    By Gomselmash

  • Product Highlight

    Most oilfield produced waters and other oily wastewaters have high fouling potential for optical sensors. High Cost Ultrasonic Cleaning systems only address the local optical path and not the entire sample system. The TurnerCIP (Clean In Place) addresses the entire sample system in the same way that CIP’s are used to clean heat exchangers and other oily systems in heavy industry worldwide. ...

  • Compact fragmentising machines for user-orientated solutions

    MERCODOR GmbH Sondermaschinenbau KG has been manufacturing custom-made fragmentising machines for volume reduction and recycling for 30 years. In particular, the compact design of the fragmentisers allows decentralised use under difficult local conditions. Besides traditional areas of use, such as fragmenting production residues and waste in the form of wood, paper, glass, metal chips, food ...

  • New generation treatment plant selects Rotork for electric control valve actuation

    Rotork’s innovative CVA electric control valve actuation technology has been selected for a demanding duty involving continuous modulation at what is described as a “new generation” waste water treatment plant in southwest France. The plant is one of the largest in France as well as one of the most energy efficient. Designed for increased rainwater and effluent treatment ...


    By Rotork

  • New Fully Automatic Clean In Place System For Oil In Water Monitors!

    Most oilfield produced waters and other oily wastewaters have high fouling potential for optical sensors. High Cost Ultrasonic Cleaning systems only address the local optical path and not the entire sample system. The TurnerCIP (Clean In Place) addresses the entire sample system in the same way that CIP’s are used to clean heat exchangers and other oily systems in heavy industry worldwide. ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you