polymer preparation News

  • The new POLYPACK® generation, for continuous and automatic preparation of polymers

    The new POLYPACK® generation, for continuous and automatic preparation of polymersWith over 20 years experience in the design, manufacture and supply of polymer (flocculants) preparation systems, Milton Roy Europe is pleased to offer the new POLYPACK® AP+ series. The POLYPACK® AP+ is a 3-compartment tank unit aimed at continuously and automatically providing a polymer solution.WHAT’S NEW Thanks ...


    By Milton Roy Europe

  • Acrison® Introduces Model 580 Liquid Polymer Preparation Module

    The new Model 580 Liquid Polymer Preparation Module (www.acrison.com/p580.htm) incorporates a two-stage activation system to produce a precise, uniform and thoroughly activated solution. The self-cleaning and non-clogging two-stage activation system consists of a Dispersion-Injector, which utilizes a highly efficient technique to first dispense and then mix liquid polymer with water. The ...


    By Acrison, Inc.

  • Acrison`s New Model 580 Liquid Polymer Preparation Module

    Acrison® Model 580 Liquid Polymer Preparation Module The new Model 580 Liquid Polymer Preparation Module (www.acrison.com/p580.htm) incorporates a two-stage activation system to produce a precise, uniform and thoroughly activated solution. The self-cleaning and non-clogging two-stage activation system consists of a Dispersion-Injector, which utilizes a highly efficient technique to first ...


    By Acrison, Inc.

  • TSCA: Preparing for the Inventory Reset: It Is Not That Easy

    With the recent release of the 2016 Chemical Data Reporting (CDR) dataset and the initial interim list of active substances released with the February 2017 copy of the Toxic Substances Control Act (TSCA) Inventory (Inventory), the ...


    By Bergeson & Campbell, P.C.

  • New system of communication to the Archive of dangerous preparation

    Dear Readers,  in this short article we would like to remind you that, according to the declarations made by the Italian Institute of Health  (Istituto Superiore di Sanità), from March 13th 2014 the new system of communication of the Archive of Dangerous ...


    By Selerant srl

  • ASTM D4762 - 11a standard guide for testing polymer matrix composite materials

    This guide is intended to aid in the selection of standards for polymer matrix composite materials. It specifically summarizes the application of standards from ASTM Committee D30 on Composite Materials that apply to continuous-fiber reinforced polymer matrix composite materials. For reference and comparison, many commonly used or applicable ASTM standards from other ASTM ...


    By ASTM International

  • BioSolar Prepares for the Next Phase of Its Super Battery Technology Development

    BioSolar, Inc. (OTCQB: BSRC), a developer of breakthrough energy storage technology and materials, today announced its strategic plans for the Company's next phase of development that focuses on identifying partners to further collaborate with to advance its proprietary Super Cathode technology.  The Company plans to pursue key ...


    By BioSolar, Inc.

  • ASTM D5450 / D5450M - 11 Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders

    This test method is used to produce transverse tensile property data for material specifications, research and development, quality assurance, and structural design and analysis. Factors which influence the transverse tensile response and should, therefore, be reported are: material, methods of material ...


    By ASTM International

  • Varian, Inc. offers FT-IR solution for polymer and materials analysis highest energy throughput reveals more information

    Palo Alto, CA -- Varian, Inc. (NasdaqGS: VARI) announced today FT-IR solutions for Polymer and Materials Applications that reduce analysis times and reveal more detailed information. FT-IR (Fourier Transform – Infra Red) spectroscopy is an essential tool in the analysis of polymer films and other materials. Applications range from quality testing of raw materials to failure analysis of large ...


  • Advanced Drug Delivery Markets (Liposomes, Polymers and Monoclonal Antibodies) now available ReportsnReports

    ReportsnReports announces it will carry Advanced Drug Delivery Markets (Liposomes, Polymers and Monoclonal Antibodies) Research Report in its store. Drug delivery is evolving at a rapid rate with new drug product formulations being discovered frequently. Advanced drug delivery deals with developing solutions for new entities in therapeutic pharmacology such as protein and peptides and other novel ...


  • ASTM D5449 / D5449M - 11 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders

    This test method is designed to produce transverse compressive property data for material specifications, research and development, quality assurance, and structural design and analysis. Factors that influence the transverse compressive response and should therefore be reported are: material, method of ...


    By ASTM International

  • Ultromat® three-chamber continuous flow systems - Perfected for continuous output

    With corresponding design modifications, ProMinent has standardised its Ultromat® AT, AF and ATF polymer preparation and continuous flow systems. The use of identical components optimises production and spare parts stock-keeping. As part of the standardisation, the Ultromat® AF polymer preparation system has been equipped with an additional chamber in the tank.  Ultromat® series polymer ...

  • The First Centrifuge Pod System Launched

    Designed to meet the growing needs for water clarification and solids dewatering in the extractive industries, the CentriPod system comes in two specially designed containers enabling easy transport and installation and can be operational within few hours from arrival on site, providing that all services are available. The system incorporates the expertise and technologies of three ...


    By Baioni Crushing Plants Spa

  • LanzaTech Produces Key Chemical Building Block from Waste Gases

    Scientific Milestone for Manufacture of Polymers, Plastics, Gasoline, Diesel and Jet Fuel AUCKLAND, New Zealand - LanzaTech has successfully produced 2,3-Butanediol (2,3-BD), a key building block used to make polymers, plastics and hydrocarbon fuels, using the company’s gas fermentation technology. LanzaTech CEO Dr Jennifer Holmgren says the New Zealand clean tech company is the first to ...


    By LanzaTech

  • PANalytical’s XRF range supports RoHS/WEEE compliance

    PANalytical’s extensive range of X-ray fluorescence (XRF) spectrometers and reference standards provides elemental analysis of heavy metals in a wide variety of materials, including plastics, polymers, metals, brass, solder and wire. These advanced systems are enabling industry to meet the new challenges of stringent EU directives such as RoHS, WEEE and ELV. PANalytical systems support compliance ...


    By PANalytical

  • Revolution in Rotomolding: Merck Develops Iriodin RMP for Enhancing Decorative Rotational Molded Products

    Merck, a leading company for innovative and topquality high-tech products in the healthcare, life science and performance materials sectors, is revolutionizing rotational molding, “rotomolding” for short. With Iriodin® RMP, the innovative preparations based on classic Iriodin®, the company is making something possible that was previously impossible: giving rotomolded plastic ...


    By Merck

  • TAL takes Permeatec to Nashville

    Nashville, Tennessee is opening its doors to Technical Absorbents Ltd (TAL) as it prepares to take its new PermeatecDS sand and granular material stabilisation technology over to the USA for the first time. It will showcase its new product at Environmental Connection – the event of the International Erosion Control Association (IECA) – which attracts leading players from ...


    By Technical Absorbents

  • Agilent Technologies Advances FTIR Microscopy Imaging

    Agilent Technologies Inc. (NYSE: A) today introduced significant enhancements to its Cary 610 and 620 Fourier transform infrared spectrometer (FTIR) microscopes. These groundbreaking FTIR microscopy systems are designed for ultimate performance, offering the largest field of view at the highest spatial resolution in the shortest ...


    By Agilent Technologies, Inc.

  • IFAT 2010: We manage and control it - ProMinent and ProMaqua at IFAT 2010, Munich (Germany)

    Heidelberg, June 2010. The ProMinent Group, a global supplier of water treatment solutions, is exhibiting at this year’s IFAT. The slogan "We manage and control it" illustrates that ProMinent develops and manufactures more than "just" metering pumps. At IFAT in Munich from 13 – 17 September 2010, the Heidelberg-based company will be presenting solutions for filtering, ...

  • Varian, Inc. shows new products at PITTCON® 2008

    New information rich detection systems and laboratory consumables showcase Varian, Inc. (Nasdaq: VARI) technologies for solving important life science and chemical analysis challenges at the 2008 Pittsburgh Conference on Analytical Chemistry and Applied Spectroscopy (PITTCON). Booth # 4621 At PITTCON 2008, Varian, Inc. highlights the following products: 920-LCThe Varian 920-LC is a fully ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you