polypropylene pipe system News

  • CPV Hiline: The pre-insulated pipe system of choice for energy efficiency

    With advances in the energy efficiency of water heaters and boilers, it comes as no real surprise that more and more contractors are turning to energy efficient systems to convey hot water. CPV’s Hiline is one such system. A pre-insulated pipework system, Hiline provides a safe and efficient method of transporting media, whilst minimising heat loss or gain. The Hiline system is tailored ...


    By CPV Ltd

  • GF Piping Systems` new metering ball valve offers precision

    GF Piping Systems has introduced the new ...


    By GF Piping Systems

  • GRP Slurry Pipes Resist Extreme Abrasion

    Abrasive wear within the slurry piping systems occurs when hard particles are forced against, or slide along, the pipeline wall, causing continuous shearing and cutting that lead to loss of wall thickness. In harsher conditions, steel slurry pipes also need to be turned over at least every two months because pipes abrade more on one side than the other. In more extreme cases, these effects cause ...

  • Sssshhhhhh…..Silence please! Wavin Plastics launches low noise push-fit system piping

    Daily flushing of internal drainage is unavoidable but silence is golden, especially in flats and apartments.  With the move towards high-rise flats and tall soil stacks, Wavin Plastics understands that noise can transmit to adjacent room space and is launching a new system that provides for a quieter life. OSMA SiTech - the new low noise push-fit soil system - now available from Wavin ...


  • GF Piping Systems Introduces New Generation Cone Check Valve Series Featuring Improved Safety, Simplicity and Efficiency

    GF Piping Systems has introduced the new generation Type 561/562 Cone Check Valve and the Type 591/595 Vent and Bleed Valve Series featuring a new spherical cone shape design that offers improved flow characteristics and leak-proof operating performance.  Available in sizes from 3/8” – 4”, customers can select from PVC, CPVC, PROGEF Standard, ...


    By GF Piping Systems

  • ASTM F2263 - 07(2011) Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water

    1. Scope 1.1 This test method describes the general requirements for evaluating the long-term, chlorinated water, oxidative resistance of polyethylene (PE), used in cold water supply or service systems by exposure to chlorinated water. This test method outlines the requirements of a ...


    By ASTM International

  • Magnaplast HT-PP system: much better now!

    Regular checks carried out during the production ensure that even the most minor fluctuations in  quality are recognise immediately. Quality features: Technical terms of delivery: Pipes and fittings meet the requirements in DIN EN 1451 and DIN 19560-10 Quality requirement: According to DIN 8078 Material features: Polypropylene ...


  • KLa Develops New Skid Mounted Slot Injector Manifold System

    KLa Systems, Inc. has developed a skid mounted Slot Injector manifold system for installation into existing basins without the need to take the basin out of service. The directional Slot Injector manifolds can be used in aerated lagoons, oxidation ditches and circular tanks to provide both oxygen transfer and mixing to meet the process requirements. The Slot Injector aerators are ...


    By KLa Systems, Inc.

  • Slot Injector Aeration System for Membrane Bioreactor (MBR) Plants

    KLa Systems has recently completed our 30th MBR aeration system project using our Slot Injector™aeration technology. These plants are for industrial customers and although predominantly in the food & beverage sector, we have also supplied MBR aeration systems for leachate treatment, ...


    By KLa Systems, Inc.

  • Hallaton, Inc. Installs Membrane Lining System at Smithsonian Butterfly House

    Hallaton, Inc., the Eastern region’s leading containment linings installation specialists, began installation of a technical geomembrane liner at the Smithsonian Institution Museum of Natural History’s Enlarged Butterfly House project in Washington, D.C. The 36 mil reinforced polypropylene membrane being installed by Hallaton, Inc. was specified by the engineer as a containment system and ...


    By Hallaton, Inc

  • New OSMA Tegra 600 – Non-Entry Inspection Chamber Offers Easy Access for Pipework Inspection

    Wavin Plastics is launching the new OSMA Tegra 600 to provide easy installation, inspection and maintenance to non-adoptable domestic and commercial drainage systems. This innovative non-entry inspection chamber is a much safer and cost-effective alternative to traditional concrete ring manholes during installation and occupation. Tegra 600 is constructed from strong polypropylene. It is much ...


  • UPW`s Unmatched Recirculating Faucet Capabilities Now Include Improved Control Features

    GF Piping Systems has introduced the second generation Type 530 AquaTap Recirculating Faucet with new functionality for greater performance and improved control. The AquaTap faucet features a proven patented flow through head design and patent-pending Inline Flow Diverter (IFD) technology that eliminates dead-legs and optimizes flow characteristics. These design features ensure pure water for ...


    By Georg Fischer AG

  • Fighting climate change

    Due to global climate changes we experience excessive rain, long periods of drought, heat, flash flooding and landslides, which can cause severe problems to nature, populated areas and ultimately also to humans. Pipelife already faces these problems by providing different solutions to limit the effects of such events and is now happy to announce extending its waste- and rainwater management ...


    By Pipelife International GmbH

  • New All-Plastic Lug Style Butterfly Valve Extends Service Life

    In response to market needs for an all plastic lug style butterfly valve, GF Piping Systems has introduced the second generation 5-series Lug Style Butterfly Valves. The Type 578 valve offers excellent corrosion resistance with long service life and is available in manual, electric and pneumatic actuated versions. Constructed of a glass filled polypropylene (PP) outer housing with ...

  • New Storm Water Chamber Introduced

    The new StormTech® chamber developed to contain and control storm water runoff in an underground system is now available from Advanced Drainage Systems, Inc. (ADS). The StormTech MC-4500™ chamber is designed in accordance with AASHTO and ASTM design standards, making it a qualified choice for use in commercial and municipal projects. Manufactured using ...

  • Complex packaged dosing plant for chlorine production

    To meet stringent health and safety requirements for steam raising at an existing chlorine gas producing plant, Gee & Company has developed one of the most complex chemical dosing systems of its type, incorporating unusually high engineering standards. Housed within a large self-contained kiosk, the packaged dosing system was factory- built and tested so as to minimise the level of site ...

  • Plastic identification codes for recycling

    All over the world, many types of plastic is commonly used. Plastic has been given a numbering category or identification code for the different types so it can be sorted accordingly. Each type of plastic melts at a different temperature and displays different properties. The identification system divides plastic into seven distinct types and uses a number code generally found on the bottom of ...


    By Global Plastic Sheeting

  • NEW 8x20 Stainless Steel Membrane Contactor for Dissolved Gas Control Targets Moderate Liquid Process Flow Rates

    Membrana-Charlotte, a Division of Celgard, LLC, has introduced a new 8x20-inch stainless steel Liqui-Cel® Membrane Contactor to its portfolio of dissolved gas control products. This FDA compliant device provides beverage and pharmaceutical customers with an option to economically design membrane-based systems with flow rate requirements that fall in between existing low and high flow rate ...


  • Dosing upgrades enhance process performance at Hogsmill Sewage Treatment Works

    Three separate upgrades to the chemical dosing plant at Thames Water’s Hogsmill Sewage Treatment Works in Surbiton near Kingston-upon-Thames have improved efficiency and performance at the site and are also designed to meet the latest phosphate discharge consents into the River Thames. Working with partners, the upgrades were designed, built and installed by chemical dosing specialist, Gee & ...

  • Membrana Introduces World’s Largest Membrane Degasser in the NEW 14 x 40-inch Liqui-Cel® Membrane Contactor

    Membrana-Charlotte, a leading membrane and degassing device manufacturer, is pleased to introduce the New 14 x 40 Liqui-Cel® Membrane Contactor to its product family. The introduction of this deaeration product extends the Liqui-Cel® product line’s capacity from 400 gpm to 550 gpm (125 m3) in a single device. This represents a >30%increase in capacity and makes the 14 x 40 the ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you