portable chlorine dioxide News

  • Portable Monitor Detects and Measures Chlorine Dioxide

    A portable instrument for the detection and measurement of chlorine dioxide (ClO2) is available from PureAire Monitoring Systems, Inc. A rugged, battery-powered instrument, the Mini-BA Chlorine Dioxide Monitor is ideal for safety monitoring at sites where fumigation and/or sterilization work is being performed. The instrument is also suitable for portable leak detection and temporary monitoring ...

  • Drink it or Sniff it? The use of chlorine dioxide in tackling legionella

    The ‘Drink it or Sniff it’ Water Technical platform at the IHEEM (Institute of Healthcare Engineering and Estate Management) Conference 2014 was focused on water quality.  In particular the effects of the HSE’s recently published HSG274 technical guidance on Legionella, and accompanying new L8 Approved Code of Practice (ACoP). Experts in chlorine dioxide and Legionella ...

  • New Digital Chlorine Dioxide Testing From Palintest

    Palintest Ltd, the leading water analysis technology company, has developed a completely new method for testing Chlorine Dioxide levels in water. The ChlordioXense provides accurate testing without relying on subjective analysis for results. The instrument eliminates the potential for user error giving precise, consistent results whatever the operator’s level of experience. Developed from the ...

  • Portable Gas Detection

    ‘Fatal Blast’ at an industrial plant or ‘Workers Overcome with Toxic Fumes’ or ‘Neighbours moved to safe place to avoid Toxic Fumes’ are headlines that are all too common. The cause of many fatal accidents is the confined space where workers are having to work.   The gas risk associated with a confined space is due to oxygen depletion (and sometimes ...


    By Shawcity Limited

  • AnalyticalTechnology introduces new portable water quality monitor for remote logging

    Specialist electrochemical sensor manufacturer Analytical Technology announces the launch of its new PQ45 Portable Water Quality Monitor. Companies in the water and industrial industries are now seeking rugged, field-deployable systems which enable the recording of water quality data in a variety of environments. Capable of monitoring a wide range of parameters in water, the PQ45 system is ideal ...

  • AdvancedSense® BE Portable Air Quality Data Display and Logging Meter

    GrayWolf Sensing Solutions of Shelton, CT, USA, introduces the new AdvancedSense BE, a rugged, simple-to-use, multi-parameter environmental meter. This purpose-built instrument is suited for both walk-thru surveys and for trend-logging over hours/days/weeks/months. Use it for Indoor Air Quality (IAQ), Industrial Hygiene (IH), Facility Management (FM), Heating Ventilation & Air ...


    By GrayWolf Sensing Solutions

  • AdvancedSense® BE Portable Air Quality Data Display and Logging Meter

    GrayWolf Sensing Solutions of Shelton, CT, USA, introduces the new AdvancedSense BE, a rugged, simple-to-use, multi-parameter environmental meter. This purpose-built instrument is suited for both walk-thru surveys and for trend-logging over hours/days/weeks/months. Use it for Indoor Air Quality (IAQ), Industrial Hygiene (IH), Facility Management (FM), Heating Ventilation & Air ...


    By GrayWolf Sensing Solutions

  • New EPA approval for Palintest Sensor method

    Palintest is pleased to announce the US EPA approval of the ChlordioX™ Plus method for the measurement of Chlorine Dioxide and Chlorite in drinking water applications. The innovative new method utilising disposable amperometric sensors has been comprehensively reviewed by the EPA and is a major breakthrough for users of chlorine dioxide as a disinfectant.  The ChlordioX™ Plus is ...

  • Palintest ChlordioX Plus & ChlordioXense – now US EPA Approved

    The ChlordioX Plus method for determining Chlorine Dioxide and Chlorite in public drinking water supplies is now a US EPA approved method. The approval, also applicable to the ...


    By Camlab Limited

  • Palintest are attending Arablab 2010

    We are attending Arablab 2010 on January 9th - 12th at the Dubai International Convention Centre. We look forward to welcoming you to our stand (235) at the show to discuss your requirements for 2010. We will be showing our complete range of portable testing equipment for drinking water, wastewater/environmental, soil and irrigation applications. Products on the stand include the ...

  • Real-time monitoring of multiple Indoor Air Quality (IAQ) parameters.

    The PPMonitor Stand Alone System (SAS) system is an integrated multi-parameter monitor of indoor air quality (IAQ). It has been developed to allow flexibility and freedom in monitoring IAQ levels, and to ensure that monitoring is thoroughly accurate, applicable and cost effective for every individual situation. In recognition of the ...


    By PPM Technology

  • Water-testing Device Measures Up

    Arkansas reporter John Magsam wrote the following article regarding Beaver Water District and their use of the ChlordioX Plus instrument, which recently gained EPA approval for the determination of chlorine dioxide and chlorite in public water supplies. Water-testing Device Measures Up EPA approves system that got a trial run in Arkansas By John Magsam A new water-testing device that ...

  • CETCI Expands Manufacturing Capabilities & Increases Productivity

    Critical Environment Technologies Canada Inc. (CETCI) has doubled its manufacturing and office space to approximately 11,000 square feet as of December 1, 2010. The service department and production department for portable IAQ instruments have moved into the new additional space. Meanwhile, production department for fixed gas detectors has utilized the space vacated by the portables and service ...

  • New Cylinder Cart Scale From Scaletron Industries Provides Chemical Weighing for Multiple Locations With One Scale

    Scaletron Industries, Ltd., a manufacturer of corrosion resistant digital and mechanical scales, has announced the addition of the Model 2308CS Cylinder Cart Scale. The new scale is designed to provide an economical, versatile solution for ...


    By PRWeb

  • CETCI Simultaneously Identifies the Air You’re Breathing with YESAIR & YES Plus LGA

    Delta, B.C. – Critical Environment Technologies Canada Inc. (CETCI) is a known industry leader and innovator for the indoor air quality (IAQ) market. Their two best selling portable IAQ instruments are the YESAIR and YES Plus LGA.   Both IAQ instruments are portable, multi-channel monitors featuring thirty different internal plug and play sensors to select from and a remote ...

  • New Calibration Extending Firmware (CEF) Added Feature

    Critical Environment Technologies Canada Inc. (CETCI) announces latest added feature, Calibration Extending Firmware (CEF), to all future developed products. CETCI introduced the CEF to the PET BACnet® transmitter in 2010. The new sensor CEF takes into account the aging of the sensors so that less frequent calibrations are acceptable in non-critical applications. With great success and ...

  • BONO Artes: Water treatment package solutions for Romania

    Most industrial facilities such as Oil & Gas plants, rigs, offshore platforms, military camps, labour camps and work sites are located in remote and isolated areas, far away from any drinking water distribution lines. In such situations, plants designed and built inside a container, also known as containerised plants, can be a good solution for solving problems of portability, without ...


    By Artes Ingegneria SpA

  • CETCI Will Showcase the YES IMS at AIHce 2012

    Critical Environment Technologies Canada Inc. (CETCI) is excited to introduce the YES Intelligent Monitoring System (IMS) at the American Industrial Hygiene Conference & Expo (AIHce) in Indianapolis, Indiana from June 18-20, 2012.  The YES IMS features a nine channel sensor capacity including temperature and relative humidity, choice of a wide range of sensor options including ...

  • CETCI Launches Phase One of the Low Power Transmitter (LPT)

    Critical Environment Technologies Canada Inc. (CETCI) is proud to announce phase one launch of the Low Power Transmitter (LPT) available in single sensor carbon monoxide (CO) or nitrogen dioxide (NO2) electrochemical sensor. The LPT features 3-in-1 wiring: two-wire “loop”, three-wire VDC or four-wire VAC power, 4 – 20 mA linear output signal, automatic thermal resetting fuse, ...

  • CETCI to Introduce Low Power Transmitter at AHR Expo 2012

    Critical Environment Technologies Canada Inc. (CETCI) will introduce their new Low Power Transmitter (LPT) at the International Air Conditioning, Heating, and Refrigeration (AHR) Expo in Chicago, Illinois from January 23-25, 2012. LPT is an economical “Low Power Transmitter” that will only be available with a carbon monoxide (CO) or nitrogen dioxide (NO2) sensor, ideal for vehicle ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you