portable combustion gas analyser News

  • LAND launches NEW Lancom 4 – portable flue gas analyser

    The NEW Lancom 4 is a Portable Gas Analyser for industrial applications. Its compact design ensures ease-of-use on site for combustion efficiency and emissions monitoring measurements in all boiler system and pollutant gas processes. Building on the success of the Lancom III, the new Lancom 4 represents the next generation of portable gas analyser technology. It has the capability to monitor up ...


    By AMETEK Land

  • New MCERTS certified portable FID emissions analysers

    Quantitech has supplied large numbers of MCERTS approved FID analysers in the UK for many years. These instruments are employed for the monitoring of TOC gas emissions in regulated processes. However, the Bernath 3006 analyser that was supplied for this purpose has been discontinued and Quantitech MD Ken Roberts says: “We are delighted to announce that we have replaced the 3006 with the ...


    By Quantitech Ltd

  • FTIR gas analyser supports carbon capture research

    The development of carbon capture and storage (CCS) technologies relies on the accurate measurement of carbon dioxide (CO2) in addition to a wide array of other gases because it is vitally important that the process does not impact upon the emissions of other greenhouse gases and potential pollutants. An advanced FTIR multiparameter gas analyser from Gasmet Technologies is therefore being ...


    By Gasmet Technologies Oy

  • Hired emissions analyser checks gas rig in Burma

    Following the installation of a turbine on a natural gas rig off the coast of Burma, it was necessary for Siemens Industrial Turbomachinery Ltd (SITL) to analyse emissions from the turbine and a hired Testo 350 XL emissions analyser from Ashtead Technology proved ideal for the application. Based in Lincoln, SITL designs, manufactures, installs and provides life time support for gas turbines used ...


    By Ashtead Technology Ltd

  • MCERTS award for VOC emissions analyser

    Quantitech has announced that the Sick 3006 portable VOC monitor has a new MCERTS certificate, valid to July 2019. The company’s Dominic Duggan says: “This is important news for any process that needs to report total hydrocarbon emissions data; MCERTS is essential for monitoring Part A processes, however, as a portable instrument, the 3006 is also ideal for Part B processes and stack ...


    By Quantitech Ltd

  • Old Emissions Analysers - Wanted Dead or Alive…

    Ashtead Technology is offering a trade-in for old emissions analysers, no matter what their condition or manufacturer. As part of the deal, customers will receive money off a new Testo 350 or Testo 340. The Testo 350 is an industrial emissions and combustion analyser, capable of measuring up to six gases simultaneously from a selection including O2, CO, COlow, NO, NOlow, SO2, H2S, CO2 and CH. ...


    By Ashtead Technology Ltd

  • Emissions analyser helps manage power station

    A multiparameter emissions monitor at Thetford power station is being used to demonstrate to the UK Environment Agency that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are ...


    By Gasmet Technologies Oy

  • Engine emissions analyser further improves Intertek’s emissions testing capability

    An advanced FTIR analyser installed at Intertek’s engine test facility in Milton Keynes is enabling engineers to improve the quality of their tests on the gaseous components of engine exhaust emissions. The gas analyser manufactured by Gasmet Technologies and installed by their UK subsidiary, Quantitech, measures multiple organic and inorganic components simultaneously from a large library ...


    By Quantitech Ltd

  • Engine emissions analyser further improves Intertek’s emissions testing capabilities

    An advanced FTIR analyser installed at Intertek’s engine test facility in Milton Keynes is enabling engineers to improve the quality of their tests on the gaseous components of engine exhaust emissions.  The gas analyser manufactured by Gasmet Technologies and installed by their UK subsidiary, Quantitech, measures multiple organic and inorganic components simultaneously from ...


    By Gasmet Technologies Oy

  • Gas analyzers accelerate business growth

    Transportable multi-parameter analytical instruments have been key to the growth of an analytical services company based in Elk City, Oklahoma. Great Plains Analytical Services (GAS) operates a fleet of mobile monitoring systems, providing onsite gas analysis for customers across the USA, and Gasmet FTIR analyzers have enabled the company to offer a comprehensive onsite monitoring service. ...


    By Gasmet Technologies Oy

  • Innovation drives flue gas treatment

    Sharing a common goal, experts in emissions monitoring and emissions abatement have formed a working partnership to develop innovative new materials for treating pollutants in flue gas emissions. A business strategy with a heavy focus on innovation has enabled Lhoist, a family owned Belgian company, to become one of the world’s leading providers of Flue Gas ...


    By Gasmet Technologies Oy

  • FTIR gas monitoring seminar a huge success

    Quantitech recently organised a very popular seminar focusing on multiparameter gas detection for both ambient and stack monitoring applications. The event took place at Bletchley Park and drew a large audience from a wide variety of industries including construction, industrial controls, Environment Agency, education, research, consultancies, test houses, hospitals, police, DSTL, Health & ...


    By Quantitech Ltd

  • Testo and Ashtead announce new partnership

    Testo, a global leader in portable measurement technology, has appointed Ashtead Technology as platinum distributor for its portable emissions analysers, the Testo 340 and 350. As part of the agreement, Ashtead also becomes Testo’s Preferred Rental Partner for this equipment. “We have been renting Testo emissions analysers for over 10 years and our team have built up a wealth of ...


    By Ashtead Technology Ltd

  • Ashtead Offers Comprehensive Range of Rental Instruments

    The Ashtead stand at MCERTS 2007 (No 14) will feature some of the company’s most popular portable products for gas detection and monitoring, including the Horiba PG250 for NOx, SO2, CO, CO2, and O2, and the Bernath heated FID for VOCs. Both of these instruments are MCERTS approved. If heated lines are not necessary, the Photovac MicroFID is available with an additional 1 litre hydrogen bottle ...


    By Ashtead Technology Ltd

  • Curing carpet underlay emissions

    The EU Solvent Emissions Directive is helping to drive down Volatile Organic Compound (VOC) emissions in a broad range of industries and Interfloor, a UK manufacturer of carpet underlay, has found that the use of a portable gas analyser from Quantitech has helped to implement emissions reductions and to demonstrate ongoing improvements in emissions control. With leading brands such as Duralay and ...


    By Quantitech Ltd

  • FTIR provides monitoring flexibility for Catalyst Environmental

    ENVIRONMENTAL instrumentation specialists Quantitech, recently supplied emissions monitoring company Catalyst Environmental, with a range of instruments that has enabled the company to provide a market-leading range of services across a particularly broad spectrum of applications. In the case study described below, the advantages of multiparameter gas analysers from Quantitech are exemplified as ...


    By Quantitech Ltd

  • Germany lowers biogas formaldehyde emissions

    The renewable energy sector has grown enormously in Germany in recent years and there are now large numbers of plants producing energy from biogas/anaerobic digestion. The emissions from these plants are regulated, but the measurement of formaldehyde (a carcinogen) is being reduced as a result of a financial incentive system. However, the measurement of formaldehyde is challenging and in order to ...


    By Gasmet Technologies Oy

  • Air Monitors targets UK food sector

    The specialist instrumentation provider, Air Monitors, has launched a new division to cater specifically for the air monitoring requirements of the food industry. Sales Manager Colin Craggs says “This initiative has been taken in response to a recent rise in enquiries from the food and beverage markets, combined with advances in measurement technology.” The new division will focus on ...


    By Air Monitors Ltd.

  • AQE 2015 to focus on ways to improve air quality and emissions monitoring

    AQE 2015 to focus on ways to improve air quality and emissions monitoring The organisers of AQE 2015, the international Air Quality and Emissions show, have announced a comprehensive programme of events that will take place in Telford, UK, on 22nd and 23rd April. Created to provide an update on the latest regulations, technologies, methods and research in air quality and emissions monitoring, AQE ...


    By Quantitech Ltd

  • It’s show time!

    With several new attractions, WWEM 2014, the international Water, Wastewater and Environmental Monitoring conference and exhibition, will be bigger and busier than ever before. The five previous WWEM events, which stretch back to 2005, have included conferences addressing testing and monitoring themes within the Process and Laboratory sectors, in addition to an international exhibition and scores ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you