portable emissions measurement system News

  • New E8500 Portable Emissions Analyzer with Upgraded CO2 Measurements

    The NEW E8500 PLUS emissions analyzer is a complete portable tool for EPA compliance level emissions monitoring and testing. This model has been upgraded to measure up to 50% CO2 using an NDIR sensor. The E8500 PLUS is ideal for regulatory & maintenance use in boiler, burner, engine, turbine, furnace, and other combustion ...

  • MCERTS for portable and fixed FTIR analysers

    Quantitech is delighted to announce that the Gasmet Continuous Emissions Monitoring System (CEMS II e) and the portable (DX4000) FTIR analysers have been awarded an MCERTS certificate (Sira MC030014/08) demonstrating compliance with the MCERTS Performance Standards EN15267-3 & QAL 1 as defined in EN 14181. The certificate demonstrates enhanced performance across an extended range of gases. ...


    By Quantitech Ltd

  • Engine emissions analyser further improves Intertek’s emissions testing capability

    An advanced FTIR analyser installed at Intertek’s engine test facility in Milton Keynes is enabling engineers to improve the quality of their tests on the gaseous components of engine exhaust emissions. The gas analyser manufactured by Gasmet Technologies and installed by their UK subsidiary, Quantitech, measures multiple organic and inorganic components simultaneously from a large library ...


    By Quantitech Ltd

  • Hands-on Real Driving Emissions Expertise

    Due to the Real Driving Emissions (RDE) tests decided on by the European Commission for 2017, vehicle manufacturers face new challenges. The primary topics of interest for the automotive industry in connections with RDE currently focus on emissions and consumption measurements in real traffic. To give customers and other interested parties an overview of the current state of the discussion and ...


    By HORIBA Europe GmbH

  • Portable XRF for soil and waste screening

    The new xSORT hand-held XRF spectrometer from SPECTRO Analytical Instruments can achieve laboratory-quality analysis on soil and waste samples.  Laboratory analysis by X-ray Fluorescence Spectrometry has been an accepted technique for the analysis of such materials for many years and was given official approval by European Standard EN 15309:2007. Using the simple sampling procedures ...

  • Engine emissions analyser further improves Intertek’s emissions testing capabilities

    An advanced FTIR analyser installed at Intertek’s engine test facility in Milton Keynes is enabling engineers to improve the quality of their tests on the gaseous components of engine exhaust emissions.  The gas analyser manufactured by Gasmet Technologies and installed by their UK subsidiary, Quantitech, measures multiple organic and inorganic components simultaneously from ...


    By Gasmet Technologies Oy

  • Germany lowers biogas formaldehyde emissions

    The renewable energy sector has grown enormously in Germany in recent years and there are now large numbers of plants producing energy from biogas/anaerobic digestion. The emissions from these plants are regulated, but the measurement of formaldehyde (a carcinogen) is being reduced as a result of a financial incentive system. However, the measurement of formaldehyde is challenging and in order to ...


    By Gasmet Technologies Oy

  • New deal on VOC emissions analysers

    The German manufacturer of gas analysers SK Elektronik (SKE), has appointed Quantitech as its exclusive UK distributor. SKE is a leading global provider of gas analysers based on the principle of Flame Ionisation Detection (FID). Key applications for the company’s analysers include emissions monitoring, process gas monitoring, and the monitoring of abatement efficiency and emissions from ...


    By Quantitech Ltd

  • Emissions regulations theme for MCERTS 2011

    MCERTS 2011 has moved to the Telford International Centre and will take place on 30th and 31st March. The new location will accommodate growth in demand for the latest information on the regulations, techniques, standards and technologies that relate to emissions monitoring and gas detection. The event's visitors will be provided with help and advice across a broad range of subjects including the ...

  • New emissions monitoring system could change face of pollution at sea

    A new emissions monitoring system being developed by a Norfolk, VA, systems engineering firm will allow vessels worldwide to continuously monitor pollutants and readily report findings to regulatory agencies and inspectors. The patent-pending Continuous Emissions Monitoring System (CEMS), developed by W R Systems, Ltd. (WRSystems), is the first technology integration of its kind. A successful ...


    By WR Systems, Ltd.

  • enitial chooses TDL-500 for emissions monitoring

    As one of the UK's leading independent providers of emission and pollution monitoring, control and management services, enitial required a portable methane detector that would be efficient at recording and storing very detailed data. Following an increasing demand for emissions mapping surveys to be carried out from their customers, particularly those concerned ...


    By Geotech

  • Old Emissions Analysers - Wanted Dead or Alive…

    Ashtead Technology is offering a trade-in for old emissions analysers, no matter what their condition or manufacturer. As part of the deal, customers will receive money off a new Testo 350 or Testo 340. The Testo 350 is an industrial emissions and combustion analyser, capable of measuring up to six gases simultaneously from a selection including O2, CO, COlow, NO, NOlow, SO2, H2S, CO2 and CH. ...


    By Ashtead Technology Ltd

  • Parliament decides not to veto car emissions test update

    A move to veto a plan to temporarily raise NOx emission limits for diesel cars was rejected by MEPs on Wednesday, after the EU Commission promised a review clause and tabled a long-term legislative proposal to revamp the EU car approval regime. This followed ...


    By European Parliament

  • Europe to require “Real World” emission tests in 2017

    European auto manufacturers have made considerable progress in reducing nitrogen oxide (NOx) emissions, but experts at Emissions Analytics note that challenges remain. The European Commission will require “real world” vehicle emission tests beginning in 2017. Emissions approval for passenger cars in Europe will then include mandatory on-the-road tests using a portable emissions ...


    By Emissions Analytics Limited

  • Emissions analyser helps manage power station

    A multiparameter emissions monitor at Thetford power station is being used to demonstrate to the UK Environment Agency that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are ...


    By Gasmet Technologies Oy

  • testo NanoMet3: The Golden Instrument for Real Driving Emissions RDE

    With an eye on Real Driving Emissions (RDE) proposed in forthcoming European Emission Standards for the type approval of light-duty vehicles, Testo SE & Co. KGaAhas unveiled an innovative portable instrument for solid nanoparticle counting and classification. Testo NanoMet3 measures number concentration in a wide range from 1E4 to 3E8 #/ccm and average diameter in the ...


    By Testo SE & Co. KGaA

  • LAND launches NEW Lancom 4 – portable flue gas analyser

    The NEW Lancom 4 is a Portable Gas Analyser for industrial applications. Its compact design ensures ease-of-use on site for combustion efficiency and emissions monitoring measurements in all boiler system and pollutant gas processes. Building on the success of the Lancom III, the new Lancom 4 represents the next generation of portable gas analyser technology. It has the capability to monitor up ...


    By AMETEK Land

  • AMETEK Land launches Cyclops Logger App, a market-leading portable thermometer

    AMETEK LAND, one of the world leaders in non contact temperature measurement for industries such as steel, glass and cement, has launched an innovative new App for Cyclops, its market-leading portable thermometer. The Cyclops Logger App, which is now available to download FREE on Google play, enhances Cyclops operation by making it even easier for anyone with a smartphone or tablet to capture and ...


    By AMETEK Land

  • NEW Low NOx/SOx Measurements with Sampling Conditioning Unit

    Problem The accurate emissions monitoring of soluble gases, present in flue gas from industrial and commercial processes, requires a sampling system designed to prevent significant loses of the SO2 and/or NO2 gases in the sampling lines prior to entering the analyzer or measuring device. The measured readings could be in excess of 20% lower than the actual values in the ...

  • Gasmet invites CEM 2016 visitors to measure almost anything

    As a world leader in FTIR technology, Gasmet’s booth (No. 33) at CEM 2016 in Lisbon, 18-20th May, will focus on both portable and continuous extractive FTIR gas analyzers, and the Gasmet CVAF Continuous Mercury Monitor (CMM). “With these technologies, our customers are able to measure almost any gaseous compound in industrial emissions,” says Gasmet’s Antti Heikkilä. ...


    By Gasmet Technologies Oy

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you