real-time continuous gas analyser News

  • On-site analysis of cannabis potency using Infrared spectroscopy

    Cannabis is increasingly being recognised for its therapeutic value. This has led to a reduction in its regulation, and even its legalisation, by many different governments. As cannabis production becomes legalised and regulated it is important that manufacturers can assess the chemical content and potency of their plants. The value of cannabis in the control of pain, spasm and a range of ...


    By Specac Limited

  • Real-time control drives efficiency into dry bulk handling operations

    Dry bulk cargos have to be loaded and unloaded quickly, efficiently, cost effectively and safely if shipping operations are to be profitable. The processes have long been mechanised, but by harnessing the power of computers to monitor the handling equipment, operational performance can be improved, scheduling for maintenance can be optimised and billing of customers can become automated. Tony ...


    By Sensor Technology Ltd

  • FTIR gas analyser supports carbon capture research

    The development of carbon capture and storage (CCS) technologies relies on the accurate measurement of carbon dioxide (CO2) in addition to a wide array of other gases because it is vitally important that the process does not impact upon the emissions of other greenhouse gases and potential pollutants. An advanced FTIR multiparameter gas analyser from Gasmet Technologies is therefore being ...


    By Gasmet Technologies Oy

  • The importance of maintaining your fixed gas analyser

    Plant technicians rigorously check for contaminants within the digester and ensure that the performance is optimised but maintaining the gas analyser monitoring the whole process is often overlooked.  Many analysers are used in harsh and potentially explosive environments and so it is of paramount importance that the operation runs smoothly and safely. With simple ...


    By Geotech

  • a1-cbiss to Exhibit New Multi-Gas Analyser at RWM

    a1-cbiss will be promoting an MCERTS certified CEM system at RWM plus the latest Ankersmid Gas Conditioning Components RWM in partnership with CIWM is Europe’s premier event dedicated to resource efficiency and waste management solutions. The event is shaped around the demands of this rapidly growing sector and spans each element of the waste hierarchy. a1-cbiss will be present once again ...


    By a1-cbiss

  • QuickTOC®purity: Precise continuous TOC analyses in low ppb ranges for pharmaceutical water

    QuickTOC®purity of LAR Process Analysers AG is an on-line measuring system for the detection of total organic carbon (TOC) in pharmaceutical water particularly for 'Highly Purified Water' (HPW) and 'Water for Injection' (WFI), according to USP Chapter 643 and EP 2.2.44. The TOC measuring system QuickTOC®purity was designed in cooperation with customers from the pharmaceutical industry in ...


    By LAR Process Analysers AG

  • LAND launches NEW Lancom 4 – portable flue gas analyser

    The NEW Lancom 4 is a Portable Gas Analyser for industrial applications. Its compact design ensures ease-of-use on site for combustion efficiency and emissions monitoring measurements in all boiler system and pollutant gas processes. Building on the success of the Lancom III, the new Lancom 4 represents the next generation of portable gas analyser technology. It has the capability to monitor up ...


    By AMETEK Land

  • AMETEK Land Makes Lancom 4 Portable Gas Analyser More Affordable

    AMETEK Land has made its Lancom 4 Portable Gas Analyser even more affordable with a Euro price reduction following Britain’s vote to exit the European Union. Lancom 4 is renowned as the world’s most versatile and accurate portable flue gas analyser whether for testing a boiler system or checking a process for a pollutant. The analyser is able to monitor up to nine different gases and ...


    By AMETEK Land

  • AMETEK Land enhances Lancom 4 Portable Gas Analyser

    Now available as a free download, Lancom 4’s innovative data acquisition software, Insight, is a powerful tool that allows users to interface their analyser with a PC for remote control and data logging. Insight ...


    By AMETEK Land

  • UKAS Quality Award, a UK first - for Geotech in Gas Analyser Calibration

    Geotech has achieved UKAS accreditation for its calibration lab for its full range of landfill, biogas and waste to energy gas analysers. According to its UKAS assessor, “Geotech is the first manufacturer of portable gas analysers to obtain UKAS accreditation.” For Geotech gas analysers, already with MCERTS certification for the instrument, this important UKAS accreditation gives Geotech analyser ...


    By Geotech

  • FTIR analyser improves anaesthetic gas detection at Torbay Hospital

    A unique gas measurement technology has enabled South Devon Healthcare’s Pharmacy Manufacturing Unit (PMU) at Torbay Hospital to conduct highly effective and detailed analysis of anaesthetic gases in a variety of hospital locations. The primary function of the PMU’s quality control department is to check active ingredient levels and sterility in manufactured pharmaceutical products. ...


    By Quantitech Ltd

  • Geotech biogas analyser gets Modbus telematics

    From 21st November Geotech will supply its user-installed GA3000 fixed biogas analyser with Modbus comms as standard. Geotech will include these modern digital comms within the already low entry-level price for the GA3000. Modbus provides digital data comms to SCADA and numerous other systems simultaneously from the GA3000 which also continues to provide 4-20mA signals. The Geotech GA3000 ...


    By Geotech

  • USEPA Approval received for Ecotech’s Trace Precursor Analysers

    Ecotech is pleased to announce that we have received USEPA Equivalent Method Approval for our range of trace Precursor Analysers as follows: EC9830T Carbon Monoxide Trace Precursor Analyser (RFCA-0992-088), EC9841T Oxides of Nitrogen Trace Precursor Analyser (RFNA-1292-090) and EC9850T Trace Precursor Sulfur Dioxide Analyser (EQSA-0193-092). Ecotech also has USEPA approval for our standard ...


    By American Innovations (AI)

  • USEPA Approval received for Ecotech’s Trace Precursor Analysers

    Ecotech is pleased to announce that we have received USEPA Equivalent Method Approval for our range of trace Precursor Analysers as follows: EC9830T Carbon Monoxide Trace Precursor Analyser (RFCA-0992-088), EC9841T Oxides of Nitrogen Trace Precursor Analyser (RFNA-1292-090) and EC9850T Trace Precursor Sulfur Dioxide Analyser (EQSA-0193-092). Ecotech also has USEPA approval for our standard ...


    By Ecotech Pty Ltd

  • New! N2O analysers for patient & occupational H&S

    Accuracy is essential for occupational N2O exposure checks and piped medical gas verification. The new Geotech G200 range of N2O analysers measure N2O at 0-1000ppm or at 0-100 percent with accuracy, speed and ease-of-use. With options for CO2, O2 and CO, the G200 range can assist anaesthetists and consultants in operating theatres, midwifery, dental surgeries, X-ray departments, hospital waiting ...


    By Geotech

  • Emissions analyser helps manage power station

    A multiparameter emissions monitor at Thetford power station is being used to demonstrate to the UK Environment Agency that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are ...


    By Gasmet Technologies Oy

  • Eaton Offers Accurate Measurement and Optimised Production with Launch of User-Friendly Modular Gas Analyser for the Biogas Market

    Power management company Eaton has launched a new ‘next generation’ MTL GIR6000 biogas analyser to help ensure reliable, accurate measurement of gases in biogas production. The MTL GIR6000 gas analyser is the first truly modular biogas analyser, requiring minimal maintenance and enabling process engineers and biogas plant managers to reduce downtime and improve their processes. ...


    By Eaton Corporation

  • Internationally Renowned Gas Analyser ‘Technical Supremo’ visits ET to provide first hand training

    ET was delighted to have Teledyne-API’s (TAPI) Director of Technical Services, Mike Troy visit its Stroud facility to deliver bespoke technical training for all of ET’s 13 service engineers as well as 5 service engineers from TAPI’s Belgian, French and Netherlands distributor, EnviControl. The training centered on some of the newer TAPI monitoring technology including ...

  • Continuous hydrogen monitor improves refinery isomerisation efficiency

    Instrumentation specialist Quantitech launched a range of hydrogen –specific gas analysers in the UK and Ireland in 2007. Since that time Managing Director Keith Golding says “The solid-state sensor technology from H2scan has proved highly popular in a wide variety of applications, but online process monitoring is becoming the most popular because of the rapid return on investment ...


    By Quantitech Ltd

  • Geotech’s first GA5000 landfill gas analyser takes 100,000 readings for SUEZ environnement

    Geotech's first GA5000 analyser, manufactured three years ago, was recently spotted in the company's calibration rig.  This portable landfill gas monitor was the first production unit of the newly launched GA5000 gas analyser range and has prompted Geotech to look into the analyser's life since then. ...


    By Geotech

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you