real-time particulate monitor News

  • Real time monitoring using particulate samplers

    Ecotech is pleased to announce the release of a real time particulate module for use with its range of particulate samplers.High Volume Air Samplers are designed to sample ambient air through a pre-weighed filter for 24 hours after which the filter is weighed and PM concentration calculated. While there are approved methods for semi-real time monitoring such as the Tapered Element Oscillating ...


    By Ecotech Pty Ltd

  • BAM1020 Real-Time Ambient Particulate Monitor Wins MCERTS Approval

    On behalf of Met One Instruments (USA), air quality monitoring specialists, Enviro Technology were presented with an MCERTS certificate for the BAM-1020 continuous ambient particulate monitor at the recent annual MCERTS 2011.  Under strict UK and European laws, businesses and organisations which release emissions into the air must carefully monitor their discharge to the environment. To this ...

  • BAM1020 real-time ambient particulate monitor wins MCERTS approval

    On behalf of Met One Instruments (USA), air quality monitoring specialists, Enviro Technology were presented with an MCERTS certificate for the BAM-1020 continuous ambient particulate monitor at the recent annual MCERTS 2011 Conference & Exhibition Gala Dinner in Telford. Under strict UK and European laws, businesses and organisations which release emissions into the air must carefully ...

  • ET brings real-time particulate data module to market

    Air quality monitoring specialists can now access real-time particulate data via a simple bolt-on accessory for the BAM-1020, available from Enviro Technology. The BX-895 Real Time Module created by Met One Instruments complements standard hourly readings with one, five, ten, 15 or 30 minute averages. This functionality is useful when correlating changing wind conditions to particulate events or ...

  • Huge demand for PM all monitor

    Palas, the German manufacturer of particulate monitoring instruments, is expanding production to cope with demand for its fine particulate monitor, the Fidas® 200, which is distributed in the UK by Air Monitors. In the following article Jim Mills explains why Air Monitors is being kept busy by the demand for this exciting new technology. PM monitoring – the ultimate ...


    By Air Monitors Ltd.

  • Air Monitors launches latest industrial particulate monitors

    A new report published in September 2012 by the European Environment Agency shows that almost a third of Europe's city dwellers are exposed to excessive concentrations of airborne particulate matter (PM); one of the most important pollutants in terms of harm to human health because it penetrates sensitive parts of the respiratory system. Colin Craggs from instrumentation specialist Air Monitors ...


    By Air Monitors Ltd.

  • New particulate monitors will improve understanding of health effects

    Globally, fine dust particles have been the focus of much greater attention in recent months as their role in deaths related to poor air quality becomes better understood. However, knowledge of the relationship between airborne particles and health effects is limited by the information that can be obtained by monitoring technologies. Jim Mills, a particulate monitoring specialist from Air ...


    By Air Monitors Ltd.

  • New particulate monitor included on Australian Standards

    Ecotech Pty. Ltd. and MetOne Instruments Incorporated are pleased to announce that the BAM-1020 has been approved under Australian Standard AS/NZS 3580.9.11.2008 for the determination of particulate matter, PM10, using Beta attenuation.The BAM-1020 is the currently the only instrument available on the market that has both Australian certification for PM10 and U.S. EPA certification for PM10 and ...


    By Ecotech Pty Ltd

  • BAM-1020 continuous particulate monitor awarded USEPA class III designation.

    Met One Instruments has become the first instrument manufacturer ever to successfully be awarded USEPA Class III equivalency designation for a continuous PM-2.5 particulate monitor. The BAM-1020 beta attenuation mass monitor has been assigned USEPA designation EQPM-0308-170, notice of which was published in the US Federal Register on March 12, 2008. The implication of this achievement is very ...


  • Met One wins US EPA class III designation for particulate monitor

    Met One Instruments has become the first instrument manufacturer ever to successfully be awarded USEPA Class III equivalency designation for a continuous PM-2.5 particulate monitor. The BAM-1020 beta attenuation mass monitor has been assigned USEPA designation EQPM-0308-170, notice of which was published in the US Federal Register on March 12, 2008. The implication of this achievement is very ...


    By Met One Instruments, Inc.

  • New Yakima Valley air monitor measures particulate pollution

    The Yakima Regional Clean Air Agency will begin operating a new air quality monitor to measure fine particulate matter in the Sunnyside region of the Yakima Valley. The monitor, which will gather data on particulate matter for a year, will allow regulatory agencies to develop effective strategies to protect air quality in the Yakima Valley and inform burn ban decisions. The monitor is located at ...

  • Lab Impex launch SmartCAM their New Alpha/Beta Particulate in Air monitor

    SmartCAM is the next generation Continuous Air Monitor (CAM) delivering unparalleled performance in terms of detectable limit, sensitivity and speed to alarm. SmartCAM utilises Spectral Measurement Analysis in Real Time (SMART) technology to provide real advances in alpha particulate detection techniques.Using an isotope peak fitting algorithm is proven to be more accurate than using ...

  • The ultimate Particulate Measurement System comes to ET

    Leading air quality monitoring supplier Enviro Technology Services Plc, now offers what it considers to be “the ultimate ambient Particulate Measurement System”. Ambient particulate measurement is generally carried out in two ways, either by continuous automatic mass measurement using a monitor or by manual sampling and subsequent gravimetric weighing using a sampler. As ...

  • Exposing Indoor Air Quality with YESDUST Particulate Sensor

    Delta, B.C. – Critical Environment Technologies Canada Inc. (CETCI) recently introduced YESDUST. This particulate sensor is designed to be used in conjunction with the multi-sensor indoor air quality (IAQ) monitors developed by CETCI, such as the YESAIR. YESDUST is a low-cost, hand-held, battery powered device. It contains a self-aspired, optical sensor that utilizes convection (heated air) to ...

  • Identifying and Mitigating Particulate Matter Pollution Exposure Risks

    Particulate matter (PM) is described by the U.S. Environmental Protection Agency (EPA) as a mixture of solid particles and liquid droplets found in the air. Some of these particles, such as dust, dirt, soot or smoke, are large or dark enough to be seen with the naked eye, but others are so small they can only be detected using powerful instruments.   Because PM ...


    By Cochrane & Associates, LLC

  • Effects of reducing particulate emissions from vehicles

    Vehicles are an important source of particulate matter (PM) pollutants. A new study cautions that reductions in PM exhaust emissions will not necessarily be matched an equal reduction in the toxic effects of emissions on health and the environment. This is important when designing regulations to limit the ecotoxicity of exhaust PM. Incomplete combustion of fuels and the breakdown of lubricants ...

  • Enviro Technology Launch Dust Analyzer ‘Old for New’ Part Exchange Deal in Response to DEFRA Particulate Monitoring Report

    Air Quality Monitoring specialists, Enviro Technology, are offering those local authorities and environmental departments currently using non-conforming TEOM analysers a value-for-money, part exchange deal, which allows an upgrade to a brand new DEFRA approved BAM-1020 Dust Analyser at a substantially lower price than a costly TEOM FDMS upgrade. This BAM-1020 ‘old for new’ part exchange deal ...

  • AQMS: New certification for the Continuous Suspended Particulate Beta Attenuation Analyzer MP101M

    We are pleased to announce that effective July 8, 2011, the Continuous Suspended Particulate Beta Attenuation Analyzer MP101M with associated module CPM has obtained certification as equivalent analyzer to Federal Reference Method from the Ministry of the Environment of Japan (MOE) for PM2.5.  The standard Beta gauge measurement Method ISO 10473 of the MP101M analyzer allows, when used with ...


    By Environnement S.A

  • New particulate measurement technology enables climate change ‘quick hit’

    More accurate measurement of Black Carbon particles is now within reach of UK local authorities, air quality and climate change researchers and industry thanks to a highly-specified device, newly available via Enviro Technology.   Reducing levels of Black Carbon in the air improves human health and slows climate change. Because it is dark, Black Carbon absorbs a lot of heat from the sun and ...

  • CARB Verifies Cleaire LongMile–S™ Diesel Particulate Filter

    Cleaire Advanced Emission Controls announced today that the California Air Resources Board (CARB) has verified the LongMile-S™ diesel particulate filter as Level 3+ for on-road applications. The verification covers a broad range of engine models built between 1993 and 2010, including later model EGR and Caterpillar ACERT engines. The CARB Level 3+ designation means the LongMile-S has ...


    By PRWeb

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you