real-time stack monitoring News

  • Stack emission monitors are ‘future-proof’, says Quantitech

    Leading instrumentation company Quantitech is able to offer customers a revolutionary ‘future-proof’ gas analyser which can protect against any requirements to monitor new parameters in the future. The FTIR Gasmet DX-4000 can monitor up to 300 different compounds of varying concentration and other gases can be added for future applications at little or no extra cost, creating a ‘future-proof’ ...


    By Quantitech Ltd

  • Pollutec 2014: new ultrasonic stack Flowmeter launched

    Environnement S.A, leading specialist in the development, manufacture and supply of continuous gas and particulate emission monitors, introduce the STACKFLØW 400 designed specifically to monitor releases from industrial sources complying with the European Monitoring Standard EN-16911-2. STACKFLØW 400 uses PCME*’s unique FlueSonic™ technology and mathematical measurement ...


    By Environnement S.A

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance assessment and optimization of particulate matter control systems, continuous ...


    By ASTM International

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance ...


    By ASTM International

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance assessment and optimization of particulate matter ...


    By ASTM International

  • $2 billion/yr market for mercury removal from stack gases

    The market for equipment and consumables to measure and remove mercury from stack gases will average over $2 billion/yr over the next decade. This is the latest forecast in the online McIlvaine "Mercury Air Reduction Markets". There are three immediate markets, all are in the U.S.  They are cement, utility boilers and industrial boilers. Hundreds of millions of dollars has already been spent ...


    By The McIlvaine Company

  • Ship Exhaust Monitoring

    Untitled Document Enviro Technology can provide cost-effective solutions to the problems of monitoring ship exhaust emissions. ...

  • South Korea buys Made in France pollution monitors

    We congratulate our South Korean exclusive distributor KENVITECH Inc. for wining several tenders for multigas monitoring systems: One multi-gas MIR 9000, in rack version, for the continuous emissions measurement of HCl, SO2, NO, NO2, CO and CO2. The ...


    By Environnement S.A

  • CODEL VCEM5100 Flow Monitor certified by TUV Rheinland

    CODEL International is pleased to announce that the VCEM 5100 flow monitor has successfully received certification under QAL 1 of EN 15267 requirements.  Tested by TUV Rheinland at a power station operating under the Waste Incineration Directive, the VCEM 5100 is certified for use on all EU regulated stationary emissions. The ...


    By Codel International Ltd

  • FTIR gas monitoring seminar a huge success

    Quantitech recently organised a very popular seminar focusing on multiparameter gas detection for both ambient and stack monitoring applications. The event took place at Bletchley Park and drew a large audience from a wide variety of industries including construction, industrial controls, Environment Agency, education, research, consultancies, test houses, hospitals, police, DSTL, Health & ...


    By Quantitech Ltd

  • ZigBee Monitors Building And Ambient Air Quality

    Hitachi WirelessInfo's AirSense Monitoring Network Uses Ember's ZigBee Networking Technology to Manage Air Quality and Temperature-Sensitive Work Environments Boston, MA — A new real-time monitoring system from Hitachi WirelessInfo is helping companies create controlled environments where temperature, humidity and airborne particles can be managed to maintain ideal working conditions. The new ...


    By Hitachi Data Systems

  • FTIR provides monitoring flexibility for Catalyst Environmental

    ENVIRONMENTAL instrumentation specialists Quantitech, recently supplied emissions monitoring company Catalyst Environmental, with a range of instruments that has enabled the company to provide a market-leading range of services across a particularly broad spectrum of applications. In the case study described below, the advantages of multiparameter gas analysers from Quantitech are exemplified as ...


    By Quantitech Ltd

  • New Technology Helps Monitor Potentially Toxic Incinerator Emissions

    Casella ETi (UK), has installed two 'Amesa ' systems (Absorption Method for Sampling of Dioxins and Furans) at the Isle of Man 'Energy from Waste' (EfW) incinerator' - the first in the UK to have a continous dioxin sample system permanently installed. Until recently technology has not been available to accurately measure dioxin and furan emissions. Rita Greenwood, Environmental Manager at ...


    By Casella

  • $3 billion market for air pollution monitoring, sampling and process control

    The world market for stack continuous emissions monitors (CEMs) will be $900 million this year. However, if one takes into account the additional revenues for ambient monitoring systems, intermittent stack sampling and process control using pollutant analyzers, the market is above $3 billion. This is the latest forecast in the McIlvaine Air Pollution Monitoring and Sampling World Markets. Some ...


    By The McIlvaine Company

  • New emissions monitoring system could change face of pollution at sea

    A new emissions monitoring system being developed by a Norfolk, VA, systems engineering firm will allow vessels worldwide to continuously monitor pollutants and readily report findings to regulatory agencies and inspectors. The patent-pending Continuous Emissions Monitoring System (CEMS), developed by W R Systems, Ltd. (WRSystems), is the first technology integration of its kind. A successful ...


    By WR Systems, Ltd.

  • Casella ETI launch ATEX approved laser based monitoring systems

    Casella ETi has launched the U.K.'s first tuneable diode laser emissions monitoring system with ATEX approval for use in hazardous areas. Proven technology in cross duct analysis of continuous emissions monitoring from within stacks has been also been developed to enable ...


    By Casella

  • Casella ETI launch ATEX approved laser based monitoring systems

    Casella ETi has launched the U.K.'s first tuneable diode laser emissions monitoring system with ATEX approval for use in hazardous areas. Proven technology in cross duct analysis of continuous emissions monitoring from within stacks has been also been developed to enable ...


    By Casella

  • The new DAQ Device from SAIL is set to Revolutionise Acoustic Monitoring

    St Andrews Instrumentation (SAIL), pioneers in passive acoustic monitoring instrumentation, is pleased to announce the launch of its new data acquisition device (DAQ) at Ocean Business 2015, stand V38. Encased in compact and robust IP51 housing, the new SAIL DAQ device is a compact and easy to use solution for real time data retrieval. Simply connect a Hydrophone or Microphone or other inputs and ...

  • AQE 2015 to focus on ways to improve air quality and emissions monitoring

    AQE 2015 to focus on ways to improve air quality and emissions monitoring The organisers of AQE 2015, the international Air Quality and Emissions show, have announced a comprehensive programme of events that will take place in Telford, UK, on 22nd and 23rd April. Created to provide an update on the latest regulations, technologies, methods and research in air quality and emissions monitoring, AQE ...


    By Quantitech Ltd

  • Industry first for Enviro Technology’s continuous Emissions Monitoring Systems

    Air quality monitoring specialists, Enviro Technology, have achieved an industry first becoming the only UK supplier of Continuous Emissions Monitoring Systems (CEMS) to meet the new, revised MCERTS certification version 3.3 for performance standards and test procedures. As part of stringent UK and European regulations, industrial companies regulated by the Environment Agency are required to ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you