roughness measurement News

  • Combustion analyzer for rough environments

    Based on decades of experience and customer feedback, NEO Monitors has designed an Ex-d certified tunable diode laser (TDLS) analyzer. The instrument is based on the proven LaserGas™ III platform, and is for those that need CO-monitoring in combustion processes. In combination with LaserGas™ III SP O2, the analyzer is the answer to any combustion process where ...


    By NEO Monitors AS

  • TOC Analyzer for the Rough Stuff

    In numerous industries water is used in various processes. There are complex sample matrices that need to be measured very fast. LAR AG offers for a wide variety of applications the QuickTOCultra. This TOC analyser determines organic pollutants in water reliably, especially samples with a high salt content and/or high particle density. The sample is injected via a robot-driven injection system to ...


    By LAR Process Analysers AG

  • 3 Flow Measurement Sites with One Transmitter

    The manufacturer presents a transmitter capable of simultaneously measuring up to three different measurement places with 9 flow velocity sensors in total. This means less installation expenses, low space requirements for installation in control cabinets and simultaneous access to 3 measurement sites using merely one communication interface. By using the new version operators are free ...


    By NIVUS GmbH

  • 3-D laser scanning: A new soil quality measurement

    Soil researchers pay close attention to bulk density, as it is one of the most common soil measurements and it is often used as a measure of soil quality. A soil’s bulk density can be indicative of the ease of root penetration, water movement, and soil strength. Measuring this value with traditional methods has been difficult in the past, but researchers have developed a new method using laser ...

  • Prosonic S – New Prosonic S Ultrasonic Level Measurement System

    Open channel flow measurement of wastewater streams in sewers Greenwood, Indiana – Endress+Hauser, Inc. introduces a new addition to the Prosonic family of ultrasonic flowmeters, the Prosonic S. From non-contact level measurement and flow measurement in open channels to pump and screen control, liquids or bulk solids, the new Prosonic S allows you to individually configure the system for ...


    By Endress Hauser

  • ASTM D4417 - 11 standard test methods for field measurement of surface profile of blast cleaned steel

    The height of surface profile has been shown to be a factor in the performance of various coatings applied to steel. For this reason, surface profile should be measured prior to coating application to ensure that it meets that specified. The instruments described are readily portable and sufficiently sturdy for use in the field. Note 1—Optical microscope methods serve as a referee ...


    By ASTM International

  • Hand-held FTIR analyzers — a new capability for at-site measurements of rock and minerals — use of FTIR for elucidating rock and mineral composition

    A2 Technologies' Exoscan hand-held FTIR (Figure 1) is increasingly being used by researchers involved in the geosciences for analysis of rocks, minerals, and soil for a broad variety of applications. The reason for this acceptance is that the Exoscan system, equipped with diffuse reflectance sampling interface, can be used equally effectively in the laboratory or field locales to provide ...


  • Ready T-Bracket Spill Berms measure up to largest spill containment and support requirements

    Oil spills and discharges most commonly happen during the oil storage container transfer process, and during fuel and chemical deliveries. Even though the majority of spills involve less than 100 gallons, most facilities that maintain above-ground storage of more than 1320 gallons of oil are still required to have oil spill plans in place as part of EPA and other regulatory rules. It is ...


    By Interstate Products Inc

  • Easy-to-Operate Flow Meter with high Accuracy

    The NivuFlow 600 was designed particularly for flow metering in full pipelines. To meet the highest accuracy requirements it is possible to equip the transmitter with up to 28 measurement paths. Pipe sensors as well as contactless clamp-on sensors are available for various measurement jobs. It is however not necessary to interrupt running processes to install both sensor types. The measurement ...


    By NIVUS GmbH

  • ASTM E2840 - 11 standard practice for pavement condition index surveys for interlocking concrete roads and parking lots

    The PCI is a numerical indicator that rates the surface condition of the pavement. The PCI provides a measure of the present condition of the pavement based on the distress observed on the surface of the pavement, which also indicates the structural ...


    By ASTM International

  • New ISO draft international standard on classification of surface particle cleanliness now available

    ISO DIS 14644-9 Cleanrooms and associated controlled environments—Classification of surface particle cleanliness is now available from the Institute of Environmental Sciences and Technology (IEST). This new ISO Draft International Standard describes the classification of particle contamination levels on solid surfaces in cleanrooms and associated controlled environment applications. This part of ...

  • Talking biogas production in Europe

    Europe is quickly becoming a hotspot for the biogas industry, and Sierra and our local French distributor Alto Instruments took advantage of that fact by exhibiting at BiogazEurope in France. Attendees learned about the entire biomass process, from the bio side of ...


    By Sierra Instruments, Inc.

  • New material reduces heat loss during electricity generation

    A new material could capture heat wasted during the production of electricity from fossil fuels or even convert your own body heat into electricity using personal ‘power jackets’. Engines that convert heat into electricity are used to produce around 90 per cent of the world’s power. These engines typically only convert 30–40 per cent of the potential energy into electricity, with the rest lost as ...

  • OWA to support state-of-the-art BEACon dual Doppler radar project to reduce cost of energy from offshore wind

    The Carbon Trust today announced its support for a state-of-the-art technology trial, through its Offshore Wind Accelerator (OWA), to understand the viability of using dual Doppler radar to produce high-resolution dynamic maps of the wind flow through and around a wind farm. The measurement campaign is part of OWA partner DONG Energy's BEACon (Beamed Radar for Energy Assessment and Site ...


    By Carbon Trust

  • CASELLA CONTINUES TO HELP BUSINESSES REDUCE RISKS FROM EXPOSURE TO VIBRATION

    New CEL-960 Human Vibration Meter offers remote operation for more easier measurement of hand-arm and whole-body vibration Further demonstrating its commitment to helping employers reduce or eliminate the ...


    By Casella

  • New HSE guidance aims to reduce bin deaths

    Choosing the correct bin location and banging on the side of containers are key measures set out in new guidance outlining ways in which waste management organisations can reduce the risk of people bin deaths. Produced by the Health and Safety Executive along with the Waste Industry Safety and Health (WISH) Forum, People in Commercial Waste Containers is aimed at helping waste collection ...

  • Portable FTIR for Geoscience Analysis of Soil and Rock in the Field

    Danbury CT. A2 Technologies now offers a family of portable hand held FTIR systems that are optimized for geoscience applications including the compositional analysis of rocks, minerals and soils. A2’s Exoscan and FlexScan FTIR systems are battery powered, hand-held FTIR spectrometers that are proven for field applications. For years, FTIR spectroscopy has been applied to this area of study ...


  • Online resource for accurate melting point determination in chemical laboratories now available

    METTLER TOLEDO has launched a new online resource for chemical industry laboratories that focuses on features and benefits of the company’s technology solutions which includes a free downloadable tips and tricks booklet at atwww.mt.com/ChemLab Melting Point Determination is a common task in chemical laboratories to test the purity and characteristics of substancesThe melting point is ...


    By Mettler - Toledo Int. Inc

  • Cheshire West and Chester Council Employees can grin like cats as New Casella vibration device helps to safeguard them at work

    Efficiency and cost-effectiveness were two of the reasons behind Cheshire West and Chester Council’s selection of a CEL-960 Human Vibration Monitor from specialist manufacturer, Casella CEL (www.casellameasurement.com; 01234 844100), to help protect staff from the effects of prolonged use of certain equipment. The unitary Council, which employs more ...


    By Casella

  • TOXFLAM online

    TOXFLAM is a software code based on an analytical solution to the atmospheric dispersion equation for inert substances that may undergo a first-order chemical or physical decay and have a density that is similar to the air density (Bianconi and ...


    By Enviroware s.r.l.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you