rubber pipe testing News

  • Inflatable Pipe Balloon

    The Plugco Pipe Balloon is an inflatable plug used to close off a pipe and block the flow in a quick and simple way to enable safe maintenance and repair of the pipe. The plugs are built with SBR+NR mixed rubber, nylon cord, Kevlar cord and strong fabrics. Pipe Balloon Pipe plugs are available in many shapes, forms ...


    By PLUGCO

  • ASTM C500 / C500M - 07(2011)e1 Standard Test Methods for Asbestos-Cement Pipe

    This test method covers the standard for testing of asbestos-cement pipe for hydrostatic strength, flexural strength, crushing strength, straightness, and uncombined calcium hydroxide. Hydrostatic pressure test is performed by placing the pipe with a factory-assembled joint, in a hydrostatic pressure testing machine. Air is expelled and an internal water pressure at a uniform rate ...


    By ASTM International

  • Testing conditions for tank testers

    In addition to the financial implications of the loss of product, leakage from storage tanks can cause serious environmental damage and represent a grave threat to health and safety. In some circumstances, particularly when the stored materials are combustible or explosive, leakage can result in a major incident involving the loss of life and substantial damage to assets and to an ...


    By Ashtead Technology Ltd

  • Inflatable Sewer Line Test Plug

    You may need to plug your sewer line during a disaster as a back flowing sewer can cause considerable property damage and pose health hazards. You can avoid those promlems by way of plugging. Buy an inflatable sewer plug (test plug) that matches the size of your main sewer pipe. You can check our products easily. Our ...


    By PLUGCO

  • Testing for Styrene is becoming increasingly important in the workplace

    The US Agency for Toxic Substances and Disease Registry (ATSDR) states that human exposure to high levels of styrene may induce adverse nervous system effects.Styrene, also known as vinyl benzene, as well as numerous other names, is an organic compound found in many manufacturing processes. Under normal conditions, this aromatic hydrocarbon is an oily liquid. It evaporates easily and has a sweet ...


  • ASTM C14 - 11 standard specification for nonreinforced concrete sewer, storm drain, and culvert pipe

    This specification covers nonreinforced concrete pipe intended to be used for the conveyance of sewage, industrial wastes, storm water, and for the construction of culverts. Pipe manufactured according to this specification shall be of three classes of nonreinforced concrete pipe identified as Class 1, Class 2, and Class 3. These pipes shall conform to the strength requirements given in this ...


    By ASTM International

  • ASTM C428 / C428M - 05(2011)e1 Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe

    This specification covers requirements relating to asbestos-cement nonpressure sewer pipes, joints, and fittings suitable for use with gravity flow, intended for sewerage and drainage applications from point of use to point of treatment or disposal. It defines certain conditions of manufacture, classification, characteristics, and acceptance tests applicable to these products. ...


    By ASTM International

  • ASTM D6244 - 06(2011) standard test method for vertical compression of geocomposite pavement panel drains

    The vertical compression test for geocomposite pavement panel drains is intended to simulate vertical, horizontal, and eccentric loading resulting from an applied vertical load. The results of the analyses, including vertical strain of the panels and core area change, may be used as an index test. The vertical compression test may be used to ...


    By ASTM International

  • Atlanta mold testing laboratory warns flood victims of potential asbestos contamination in buildings

    As the flood waters eventually begin to recede some property owners who venture back into their homes and businesses will discover water damaged properties and ruined belongings. Fortunately many of the water damaged properties can be saved with proper and extensive water extraction and mold remediation and prevention techniques. Damaged properties not only have to deal with water damage issues, ...


  • Boston asbestos testing laboratory warns flood victims of potential asbestos contamination in buildings

    As the flood waters eventually begin to recede some property owners who venture back into their homes and businesses will discover water damaged properties and ruined belongings... As the flood waters eventually begin to recede some property owners who venture back into their homes and businesses will discover water damaged properties and ruined belongings. Fortunately many of the water damaged ...


  • ASTM D2765 - 11 standard test methods for determination of gel content and swell ratio of crosslinked ethylene plastics

    Many important properties of crosslinked ethylene plastics vary with the gel content. Hence, determination of the gel content provides a means of both controlling the process and rating the quality of finished products. Extraction tests permit verification of the proper gel content of any given crosslinked ethylene plastic and they also permit comparison between different ...


    By ASTM International

  • ASTM C1619 - 11 standard specification for elastomeric seals for joining concrete structures

    This specification covers the physical property requirements of elastomeric seals (gaskets) used to seal the joints of precast concrete structures used in gravity and low head pressure applications. The seals shall be classified as: Class A; Class B; Class C; Class D; and Class E. All gaskets shall be extruded or molded in such a manner that any ...


    By ASTM International

  • Visit us during the WATEX Exhibition 2016 on 25-28 September in Tehran

    PlugCo is the biggest manufacturer of inflatable pipe plugs, packers, pipe balloons, pipe stoppers, pneumatic plugs, rubber plugs, drain and sewer pipeline testing equipment in Turkey. PlugCo produce plugs up to 144”(DN3600) size and up to 6 Bar back pressure. All of PlugCo products suitable to test according to European Standard EN 1610. PlugCo has an efficient shipping department ...


    By PLUGCO

  • A-Lok premium `The New watertight connector`

    A-LOK® Premium™ Designed to produce a guaranteed watertight seal between pipe and concrete, the A•LOK® Premium™ flexible pipe-to-manhole compression connector provides maximum performance on the job site. Its unique design not only saves valuable project time, but also ensures longevity and offers unsurpassed environmental benefits. A-LOK® Premium™ connectors prevent infiltration and ...


    By A-Lok Products, Inc.

  • PlugCo will attend The WATEX Exhibition 2016

    PlugCo will attend The WATEX Exhibition 2016 in Tehran, Iran 25-28 September. At 12th International Water and Wastewater Exhibition, PlugCo will be exhibiting its products. Please visit us in our booth, and take the opportunity to speak with our experienced sales staff about infrastructure solutions for your applications. PlugCo is the biggest ...


    By PLUGCO

  • PlugCo will attend The WWETT Show 2017

    PlugCo will attend The WWETT Show 2017. At this exhibit, PlugCo will be exhibiting its products. PlugCo is the biggest manufacturer of inflatable pipe plugs, packers, pipe balloons, pipe stoppers, pneumatic plugs, rubber plugs, drain and sewer pipeline testing equipment in Turkey. PlugCo produce plugs up to 144”(DN3600) size and up to 6 Bar back ...


    By PLUGCO

  • ASTM F1150 - 11 Standard Specification for Commercial Food Waste Pulper and Waterpress Assembly

    1. Scope 1.1 This specification covers commercial pu78834.00 2. Referenced Documents (purchase separately) ASTM Standards A6/A6M Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling A29/A29M Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements ...


    By ASTM International

  • ASTM C1482 - 11 standard specification for polyimide flexible cellular thermal and sound absorbing insulation

    This specification covers the composition and physical properties of lightweight, flexible open-cell polyimide foam insulation intended for use as thermal and sound-absorbing insulation for a certain temperature range in commercial and industrial environments. The insulations are classified into the following types: Types I, II, III, IV, V, and VI. Polyimide foam shall be manufactured from the ...


    By ASTM International

  • Plugco opens Iran office in Tehran

    Turkey-based rubber pipe line test equipment producer has announced that its office in Tehran, the capital of Iran, is now open. Plugco Iran The company has conducted a lot of projects in the Middle East, Eastern Europe, China, South America, Asia, Africa and other countries. Plugco provides high quality plugs up to 144”(DN3600) size and 6 Bar back pressure. All of Plugco ...


    By PLUGCO

  • ASTM C534 / C534M - 11 standard specification for preformed flexible elastomeric cellular thermal insulation in sheet and tubular form

    This specification covers sheet and tubular preformed flexible elastomeric cellular thermal insulation. The materials are classified into three grades according to the operating temperature range of the industrial systems that each material is used for. The non-thermoplastic, thermoset products should be made of natural or synthetic rubber that may be modified using various thermoplastic or ...


    By ASTM International

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you