sample particulate News

  • COD analyzer for laboratories

    LAR's QuickCODlab is a chemical-free working COD analyzer for the determination of the chemical oxygen demand (COD) in water. Due to an innovative injection and oxidation technique, unfiltered water samples incl. particulates will be injected directly via a precision syringe into the oven. Optionally, an Autosampler for up to 60 samples is available. Using the Ultra high temperature combustion ...


    By LAR Process Analysers AG

  • Introducing the NEW E-FRM-DC!

    The New and Improved Met One Instruments E-FRM-DC sampler is a single-event filter sampler for the determination of daily PM2.5 or PM10 particulate concentrations in ambient air. The E-FRM-DC has an innovative design and unique features provide a versatile, reliable, and simple platform for your ambient air sampling needs. This versatile instrument is used for fixed or portable ambient ...

  • New isokinetic sampler is automatic

    Environmental monitoring equipment specialist Quantitech has announced the launch of a new generation of automatic isokinetic samplers that bring new levels of speed, accuracy and reliability to the sampling of particulates and gases from chimneys, stacks and ducts. The new Tecora Isostack G4 (4th Generation) automatically records measurement values in addition to equipment configuration data, ...


    By Quantitech Ltd

  • COD Analysis for Laboratories

    LAR's QuickCODlab is a COD analyzer for the determination of the chemical oxygen demand (COD) in laboratory applications. Water samples will be injected via a precision syringe or via autosampler. Both injection systems are equipped with special syringes so that unfiltered water samples incl. particulates can easily be injected into the oven. Thus, operators do not need any sample preparation ...


    By LAR Process Analysers AG

  • COD Analyzer for Waste Water Analysis

    LAR's QuickCODultra is an online COD analyzer for the determination of the chemical oxygen demand (COD) in complex water. The analyzer uses a robotic horizontally and vertically moving injection needle. It enables the injection of the raw waste water sample incl. particulates into the oven. Thus, operators do not need any sample preparation such as filtration. The COD analyzer works with a high ...


    By LAR Process Analysers AG

  • EPA monitors air quality in cleanup from Iowa floods

    The US Environmental Protection Agency is conducting air sampling for asbestos and air monitoring for particulates as Iowa communities clean up from recent floods. EPA on-scene coordinators will assess air quality by using fixed monitoring equipment situated at key points throughout the flood-damaged area. The initial locations for sampling and monitoring activities include the cities of Cedar ...

  • ASTM E1216 - 11 standard practice for sampling for particulate contamination by tape lift

    The tape lift provides a rapid and simple technique for removing particles from a surface and determining their number and size distribution. By using statistically determined sample size and locations, an estimate of the surface cleanliness level of large areas can be made. The user shall define the sampling plan. The sampling plan shall consider the importance of surface geometry and ...


    By ASTM International

  • Standing room only at FTIR workshop

    The Quantitech workshop on FTIR gas analysis at AQE 2013 was completely full, with many attendees forced to stand outside the entrance. Commenting on the appeal of this event, Quantitech’s Dominic Duggan said: “FTIR can measure almost any gas in almost any application, so anyone with an interest in three or more gases will need to know about FTIR.” About half of the workshop ...


    By Quantitech Ltd

  • ASTM D3268 - 91(2011) standard test method for separation and collection of particulate and gaseous fluorides in the atmosphere (Sodium bicarbonate-coated glass tube and particulate filter method)

    The sodium bicarbonate coated tube filter method provides a means of separating and collecting atmospheric gaseous fluoride and particulate fluoride samples. Since the samples are collected on the dry tube and filter, the fluoride may be eluted with a small volume of eluant (see Section 10 for specific instructions on fluoride elution). Elution into a small volume and the sensitivity of the ...


    By ASTM International

  • Quantitech workshop will be one of your ‘five-a-day’

    Every attendee at Quantitech’s gas analysis workshop at AQE 2013 will receive a free orange. The purpose of the complimentary citrus refreshment will be revealed during the workshop, which will take place from 12-12.30 on Thursday 14th March in Workshop Room 1. Entitled ‘FTIR analysis for complex gas mixtures – real world examples of trace gas analysis in ambient air and stack ...


    By Quantitech Ltd

  • MicroVol 1100 Compact Particulate Sampler

    Ecotech is pleased to announce the Ecotech MicroVol 1100 meets the new Australian Standards for determination of suspended particulate mater AS/NZS 3580.9.9:2006 (PM10) and AS/NZS 3580.9.10:2006 (PM2.5) . The MicroVol 1100 Particulate Sampler provides a flexible sampling platform for PM10, PM2.5 or TSP particulate sampling. The MicroVol 1100 sampler is microprocessor controlled and features ...


    By Ecotech - ACOEM Group

  • TOC Analyzer for Cooling Water

    The on-line TOC analyzer QuickTOCultra by LAR Process Analysers AG, Berlin, is a measurement system for the determination of the total organic carbon (TOC) in water. The parameter TOC will be inter alia used for the assessment of cooling water quality. Using a horizontally and vertically moving injection needle the sample will be transported and injected form the sample vessel into the furnace. ...


    By LAR Process Analysers AG

  • ASTM E2515 - 11 standard test method for determination of particulate matter emissions collected by a dilution tunnel

    1. Scope 1.1 This test method is applicable for the determination of particulate matter emissions from solid-fuel-burning appliances including woodstoves, pellet-burning appliances, factory-built fireplaces, masonry fireplaces, masonry heaters, indoor furnaces, ...


    By ASTM International

  • EPA to Meet with Residents of the Edisto Court Neighborhood

    The U.S. Environmental Protection Agency (EPA) will be participating in a meeting to provide an update regarding its removal assessment to residents of the Edisto Court neighborhood. Representatives from the S.C. Department of Health & Environmental Control will also be present at the meeting hosted by Councilman Moe Baddourah and Edisto Court Neighborhood Association President Bessie Watson. ...

  • New Aurora family of nephelometers from Ecotech

    Ecotech, total solution provider for environmental monitoring solutions, has today announced the release of the Aurora series, a new range of highly accurate, cost effective and user friendly integrating nephelometers. Comprising a choice of either single wavelength or a 3 wavelength instrument, the Aurora family delivers increased accuracy in studying particulates and their source of origin, ...


    By Ecotech - ACOEM Group

  • Sierra-CP Expands Operations with New India Location in Pune

    The Automotive Test Division of Sierra, known as Sierra-CP Engineering, is a complete turn-key automotive test systems company and has manufacturing and support facilities spread across the globe—United Kingdom, United States, Malaysia, China, and India. Having operations in India for over a decade, Sierra-CP has announced the opening of a new expanded location in Pune, India. Sierra ...


    By Sierra Instruments, Inc.

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance assessment and optimization of particulate matter ...


    By ASTM International

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance ...


    By ASTM International

  • Sierra expands global reach with the acquisition of CP engineering in the United Kingdom

    Sierra Instruments, headquartered in Monterey, California, a flow measurement and control instrumentation and automotive test systems company, has signed an agreement to acquire CP Engineering, a privately-held company headquartered in Malvern, England. For the last 30 years, CP has designed and manufactured engine and vehicle testing technology with hardware and software solutions that cover the ...


    By Sierra Instruments, Inc.

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance assessment and optimization of particulate matter control systems, continuous ...


    By ASTM International

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you