sampling system News

  • Protea Heated Gas Sampling System

    For heated gas sampling from up to 4 separate sample points, Protea’s Heated Stream Selection Module (HSSM) is a ready to use 19" rack interface that can be used with Protea’s range of multigas FTIR analysers or any other industrial gas instrumentation.  The standard HSSM includes a bank of 4 heated solenoid valves with 1 common outlet, allowing each of the sample ...


    By Protea Limited

  • Water sampling system for oil pollution

    General Oceanics Rosette Water Samplers with GO-FLO sampling Bottles and Idronaut 316CTD. This flexible system can be configured for any size vessel and deployed with or without a conducting sea cable. The GO-FLO water bottles equipment with the new CAM release can be opened discretely at any depth to avoid contamination from above. The Idronaut conductivity sensor is not damaged by contact with ...


    By General Oceanics Inc.

  • How to and how not to buy a LIMS or Sample Tracking System

    Autoscribe has many decades of management experience in designing, developing, delivering and supporting LIMS solutions to labs in many industries. In that time, we have gathered together a lot of information on what makes a good system, what makes a bad one, the issues to bear in mind, and the problems to look out for.We have now put all of this information into a guide, which is specifically ...


    By Autoscribe Informatics

  • Water Sampling Update

    Summer field work has come to a close at the Newberry EGS Demonstration site, and with it we’ve completed the last round of water sampling and analysis. The EGS project was carefully designed to protect the local groundwater system, and our groundwater monitoring program helps us make sure we protect this valuable natural resource. Our water monitoring program was designed to document and ...


    By AltaRock Energy, Inc.

  • Opsis Fastloop - An alternative sampling system for DOAS cross-duct CEM systems

    Untitled Document Opsis engineers have come up with a novel solution to the problem sometimes encountered when it is difficult to locate cross-duct DOAS analysers close to the stack due to restricted access and ...

  • LIMS boost for multi-sample registration

    The Bulk Sample Registration capability of the Matrix Gemini Laboratory Information Management System (LIMS) from Autoscribe has been designed to save time when registering large numbers of samples and/or multiple sample types. Details for different sample types can be presented on a single screen. This has additional benefits for contract laboratories which may need to carry out regular analyses ...


    By Autoscribe Informatics

  • Gas Sampling Probes for Every Application

    Gas sampling specialists JCT presents a complete portfolio of gas sampling probes with a new set of technical brochures available on the company’s website. Beyond the wide range of gas sampling probes for typical gas analysis applications like continuous emission monitoring (CEMS) JCT is well known for its flexibility in building reliable solutions also for demanding applications like NOx ...


    By JCT Analysentechnik GmbH

  • PerkinElmer Introduces High-Throughput Sample Introduction Systems for Environmental Analysis

    Integrated Solution Provides up to 50 Percent Increase in Optima ICP-OES and ELAN ICP-MS Productivity WALTHAM, Mass. – PerkinElmer Life and Analytical Sciences, a global leader in application-focused measurement and analysis solutions, today announced an agreement with Elemental Scientific Inc. (ESI) to offer integrated sample introduction systems designed to improve throughput when making ...


    By PerkinElmer, Inc.

  • Sample System developed for safe, accurate analysis of moisture in corrosive gases

    Developed specifically for use in safe or hazardous area locations, the MM500 sample system from Systech Illinois allows safe, accurate and reliable analysis of moisture in Chlorine, Hydrogen Chloride and other corrosive gas mixtures. This sample system works in conjunction with Systech’s range of moisture analysers, which represent the latest advance in moisture analysis. Designed to be ...


    By Systech Instruments Ltd

  • Automatic Duckbill Composite Sampling System: Reach New Heights!

    Automatic sampler monitors effluent for regulatory compliance, even in freezing temperatures. Explosion-proof, using compressed air (no pumps; no vacuum system) with a self-cleaning action, it moves samples up high lifts (24+m) and over long runs (30+m) from multiple sites simultaneously. The controller can be located far from the sampling site and programmed to sample based on time or by a flow ...

  • ALcontrol Installs Sample Planning and Scheduling Software

    ALcontrol are presently installing TAPS software from Trilogy Business Systems to organise their field sampling and monitoring programmes.  The software will ensure all samples are taken on time, spot missing bottles and allow instant re-scheduling if there is a failure to collect. The efficiency savings expected include optimisation of collection traveling times, printing of field round ...


    By Trilogy Group Limited

  • New high performance sample gas cooler

    Bühler Technologies, a leading manufacturer of high quality accessories and systems for the gas analysis, is introducing the PKE 52, a new series of high performance peltier coolers. Depending on the selected heat exchanger, the gas flow can go as high as 500l/h per single stream, or up to 2x 250 l/h per dual stream even under harsh ambient conditions. Analogue to the well known PKE 5 ...


    By Bühler Technologies GmbH

  • UK Health and Safety Laboratory samples with Axetris MFCs

    Proficiency testing ensures workplace & consumer safety. ...


    By Axetris Ag

  • Distek, Inc. Releases the PrepEngine Sample Prep Station

    North Brunswick, NJ – Distek, Inc., an industry leader in pharmaceutical laboratory testing instruments, accessories and validation services, is excited to release the PrepEngine Sample Prep Station for Content Uniformity. The PrepEngine was co-developed through collaboration between Distek, Inc. and Two Square Science based in Fall River, MA. The result is a 10 station system which ...


    By Distek, Inc.

  • Novel sample pretreatment unit for heavy metal analysis

    AppliTek launches a unique solution for accurately determining the total metal content in water bodies. The novel pretreatment system, designed as an add-on unit for AppliTek’s VPA Series of Voltammetric Process Analyzers, allows to safely and conveniently process incoming samples with concentrated acids and oxidizing agents. Accuracy, precision and stability of results are very critical ...


    By AppliTek NV

  • The Kitagawa Gas Detector Tube System is an accurate and cost effective spot gas detector sampling system.

    Need a simple solution to Gas Detection?   The Kitagawa Gas Detector Tube System is an accurate and cost effective spot gas detector sampling system.   The Kitagawa Gas Detector Tube System available at Shawcity Limited is used by many industries to detect gases and vapours, simply and reliably, without the need for calibration, effort or ...


    By Shawcity Limited

  • Mineral oil contamination in dry food samples

    SpeedExtractor E-916: Optimization of pressurized solvent extraction (PSE) for the rapid and efficient determination of MOSH and MOAH in dry food samples  Click here for more information   Related ...


    By BÜCHI Labortechnik AG

  • Sample gas cooler now FM certified

    Bühler Technologies, the leading manufacturer of components for gas analysis systems based in Ratingen, Germany has received FM Approval for their Compressor Gas Coolers (EGK Series). Different from traditional sample gas cooler designs, these advanced gas coolers are based on an energy efficient compressor cooling system and perform at an extremely stable dew point even under hot ambient ...


    By Bühler Technologies GmbH

  • Webinar: Want more flexible sample characterization?

    We invite you to attend our webinar introducing the Thermo Scientific™ Q250 SEM. The Q250 SEM is the advanced, flexible solution for current and future research applications. Featuring three imaging modes, high vacuum, low vacuum and ESEM, it accommodates the widest range of samples of any SEM system. Discover how sample characterization becomes complete with fast and accurate elemental ...


    By Thermo Fisher Scientific

  • Eriez Separate, Detect and Sample at Bauma 2010

    Eriez Magnetics Europe Ltd are exhibiting the latest technology in metal removal, detection and sampling equipment at Bauma to be held in ...


    By Eriez Magnetics Europe Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you