screw press News

  • Aleppo is screwed. Thanks everyone.

    As humanitarian aid organisations in Syria prepare for one of their biggest tests yet, they are falling into disarray. Judging by the course of the war so far, Aleppo’s hundreds of thousands of civilians could well be besieged, used as human shields, forced to flee, or all three. As the aid community readies for the inevitable crisis, it faces a split between ...


    By IRIN

  • Delta Screw now even more energy efficient

    This new series of E compressors includes four sizes in the volume flow range from 900 to 6,700 m3 per second and drive capacities from 55 to 630 kilowatts. The single stage, oil-free screw (type) compressors are being offered with 2.0 bar and 3.5 bar differential pressure. Energy savings of up to 6% can be achieved, depending on the pressure ratio or the volume flow - which represents impressive ...

  • The new ANDRITZ C-Press: efficient sludge dewatering with high performance and low operating costs

    International technology Group ANDRITZ has launched new sludge dewatering equipment for waste water treatment plants, industrial treatment plants, and food applications. The ANDRITZ C-Press, a screw press providing high performance combined with compact design, features low operating costs. With its direct drive system and conical shaft with constant screw pitch, the new press can handle inlets ...

  • TRA Snow and Sun Doubles Solar Racking Production Capabilities with New Press Brake

    A solar panel doesn't automatically attach itself to a roof, wall or structure. There are numerous frames, pieces, and screws that become part of the solar system before it provides energy to a building. TRA Snow and Sun manufactures ...


    By PRWeb

  • What are the benefits of utilizing dry ice blasting in rubber manufacturing?

    Dry ice blasting is used to clean rubber molds for manufacturers of gaskets, o-rings, shoes, and many other products. Because the tooling can be cleaned right at the press, dry ice blasting reduces potential damage to the molds from removing them from the press and reinstalling them. To reach the perfect cleaning result, tire manufacturers should use Automated In-Press Mold Cleaner, amobile ...


    By IceTech A/S

  • Japanese Market for Orthopedic Trauma Devices 2010 now available at ReportsandReports

    Dallas, TX: ReportsandReports announce Japanese Market for Orthopedic Trauma Devices 2010 Market Research Report in its Store.   Browse complete Report at ...


  • Hydria Water engages with a Children’s hospital in Ukraine.

    Hydria Waters contributes to a children’s hospital in Kiev, Ukraine by supplying several products from the water treatment portfolio. By the end of this year the supply of our step type screen, the Cross Screen XS 1700-450-6, which is a fine screen, will be installed along with ancillaries such as a screw press, some piping and also a manually raked screen MS ...


    By Hydria Water AB

  • Bellmer acquires Kufferath Machine Building Division

    Gebr. Bellmer GmbH Maschinenfabrik located in Niefern, Germany has acquired the former machine building division of Andreas Kufferath GmbbH + Co KG in Düren, also Germany. Kufferath with its product series AKUPRESS® is regarded as the leader of the screw press technology worldwide. Experience gained through decades and numerous trademark rights form the basis for this. For example, only ...

  • 150 years AERZEN, part 2 1931–1984 - AERZEN breaks records

    The production of screw compressors, which have since become one of the most important products made by AERZEN, began during the Second World War. At that time, the Reich Ministry for Armaments and War Production instructed Managing Director Karlheinrich Heller to design a screw compressor, intended to serve as an exhaust gas compressor in new submarine types. After a period of negotiations ...

  • Three Sludge Dewatering Lines for Baiyun, China

    On October 25, 2010 three sludge dewatering lines left our Düren plant en route to our customer Zhumadianshi Baiyun Paper, a pulp and paper mill situated in the north of China. This consignment is the largest order in the history of BELLMER KUFFERATH as a supplier of screw presses for sludge dewatering purposes. Each of the three lines basically consists of an FR flocculation reactor, an ...

  • WesTech Announces Strategic Partnership with Nordic Water

    May 20th, 2009. WesTech Engineering, Inc. is pleased to announce a new partnership with Nordic Water Products. WesTech, will now have sole North American distribution rights for the following Nordic Water product groups: MEVA fine screens, featuring the Rotoscreen™ Step and patented Monoscreen™ suitable for pre-membrane treatment. New from Meva is the patented Screw Wash Press with CPS. The ...


    By WesTech Engineering, Inc.

  • Moyno 2000 HS System Technology Targets Dewatered Sludge Cake

    The Moyno 2000 HS system is a significant technology advancement for the wastewater treatment industry. It can pump filter cake further distances with higher volumetric efficiencies than any other progressing cavity pump. Its twin-screw feeder supplies a constant, pressurized feed rate to the pump resulting in a 100 percent pump cavity fill rate. The Moyno 2000 HS System features an integral ...


    By Moyno, Inc.

  • Japanese Market for Orthopedic Trauma Devices 2010 (Executive Summary) Now Available at ReportsandReports

    Dallas, TX: ReportsandReports announce it Will Japanese Market for Orthopedic Trauma Devices 2010 (Executive Summary) Market Research Report in its Store. Browse complete Report on: ...


  • ANDRITZ receives order for extensive rebuild of Stora Ensoʼs Varkaus mill, Finland

    International technology Group ANDRITZ has received an order from Stora Enso to rebuild the fiberline, evaporation plant, recausticizing plant, recovery boiler, and recycled fiber plant at the Varkaus pulp mill, Finland. Start-up is scheduled for the fourth quarter of 2015. The order is part of Stora Ensoʼs project to convert an existing fine paper machine to a containerboard machine as ...

  • New AKUPRESS® X model for explosive and hazardous materials

    The screw press line AKUPRESS® X has been at the vanguard of the market for dewatering to maximum dryness for many years. The range of application is expanding continuously. Recently we have been contacted by customers who need to dewater materials that require special measures for protection against ...

  • Innovation in maraging steel EutecTrode XHD 6860

    Smooth, regular weld surface requires minimal machining Low temperature ageing treatment eliminates quenching defects & distortion Retain aged hardness up to higher service temperatures Good weldability without preheating for practical engineering applications XHD 6860 - higher performance electrode with a completely new metallurgical formulation ...


    By Castolin Eutectic

  • Strautmann Umwelttechnik compacts Styrofoam® up to 700kg/m³

    Make money out of your waste with balers from Strautmann Umwelttechnik. Week by week, there are many thousand of tons of waste which arise from packaging material and insulation material, which comes from expanded polystyrene, short EPS, like Styrofoam®. In the 90s the disposal of this very voluminous material was very expensive for many companies. Nowadays many progressive enterprises earn ...

  • US Labor Department`s OSHA cites Smithville Manufacturing for 21 violations at Wooster, Ohio, facility after worker`s finger is amputated

    The U.S. Department of Labor's Occupational Safety and Health Administration has cited Smithville Manufacturing Co. for 21 health and safety violations, including one willful, after receiving a complaint that a worker's finger was amputated at the facility by an unguarded press machine. OSHA has proposed penalties of $65,800 as a result of the December 2012 inspection. The willful violation was ...

  • German Premium Manufacturer SOLARWATT Expands its Commitment in the United Kingdom

      Solar modules as roofing tiles: SOLARWATT presents its in-roof solution Easy-In at ECOBUILD in London. SOLARWATT solar systems have the winning credentials of "Made in Germany" and compliance with MCS standards. SOLARWATT AG (Dresden) is consolidating its activities in the UK. The German photovoltaic specialist will be ...


  • Bottled ozone

    Ozone is very versatile as an environmentally friendly oxidation agent. The spin-off company Oxy3, in collaboration with a research team at Montan University in Leoben, Austria, has managed to come up with a new ozone production method. The aggregate is simple to use and plugs into commonly available oxygen bottles. Ozone can be produced simply by pressing a button, in various concentrations; ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you