screw pump News

  • Corrosion-resistant screw pump retrofit

    The city of Woodland, California, USA, has retrofit the headworks and return activated sludge (RAS) systems at its Water Pollution Control Facility with five stainless steel Siemens Internalift pumps. The pumps replaced their more than 25-year-old carbon steel predecessors. The new pumps' stainless steel design is expected to be more corrosion-resistant, thus increasing expected equipment ...

  • Screw Pumps for Kortenhoef Placed in a Jiffy

    FishFlow Innovations have placed the two fish-friendly Archimedean screw pumps for pumping station Kortenhoef in Nederhorst den Berg. Placing the screw pumps was done in just a few hours. This is partly due to the unique steel frame that carries the screw pumps. If the pumping station will go into use in the spring of 2014, it will be a fish-safe passageway in both directions; moving from the ...


    By FishFlow Innovations

  • New screw pump from Colfax Fluid Handling

    Colfax Fluid Handling, a business of Colfax Corporation (NYSE: CFX), will in June begin deliveries of a new screw pump for lubricating liquids. The new series covers a wide capacity range with a variety of installation variations. The pumps are suitable even for rough operating conditions. The new "CFH M" series is ideal for pumping all types of lubricating liquids like lubricating and hydraulic ...


    By ALLWEILER GmbH

  • New screw pump from Colfax Fluid Handling

    Colfax Fluid Handling, a business of Colfax Corporation (NYSE: CFX), will in June begin deliveries of a new screw pump for lubricating liquids. The new series covers a wide capacity range with a variety of installation variations. The pumps are suitable even for rough operating conditions. The new "CFH M" series is ideal for pumping all types of lubricating liquids like lubricating and hydraulic ...


    By ALLWEILER GmbH

  • New screw pumps reduce operating costs by up to 40%

    The new generation of screw pumps from Colfax Fluid Handling reduces operating costs by up to 40%. As complete pump sets consisting of the pump, motor, and a frequency converter, they achieve these savings without additional investment. Colfax Fluid Handling promises a leap forward in technology that dramatically reduces operating costs of screw pumps for the first time in decades – without ...


    By ALLWEILER GmbH

  • SOLTEC single screw eccentric progressing cavity pumps in food industry

    Pumps of SOLTEC company Novomoskovsk Mechanical Plant are placed on most leading manufacturers of dairy industry in Russia, Ukraine, Belarus, Kazakhstan, Azerbaidzhan, Moldova, Georgia and countries of Baltic. SOLTEC horizontal and vertical food pumps transfer cream, yogurt, sour cream, melted cheese and other milk products. At the same time it helps to minimize the whipped effect and avoid the ...

  • SOLTEC Single Screw Eccentric Progressing Cavity Pumps on household chemistry production

    SOLTEC with Novomoskovsk Mechanical Plant have fulfilled one great project on the development of one of the leading producers of household chemistry. Due to well co-ordinated work of specialists of two companies, a new high-tech plant was supplied with 15 pump units, that’s why the productivity per shift is 340 t. SOLTEC Single Screw Eccentric Progressing Cavity Pumps are the main means of ...

  • New screw pumps reduce operating costs by up to 40%

    The new generation of screw pumps from Colfax Fluid Handling reduces operating costs by up to 40%. As complete pump sets consisting of the pump, motor, and a frequency converter, they achieve these savings without additional investment. Colfax Fluid Handling promises a leap forward in technology that dramatically reduces operating costs of screw pumps for the first time in decades – ...


    By ALLWEILER GmbH

  • The substitution of gerotor single screw pair

    Specialists of SOLTEC company Novomoskovsk Mechanical Plant fulfill any tasks given by a Customer. It means the installation of SOLTEC gerotor pair on the unit of import manufacture. This pump transfers the sludge of sewage on one of the Moscow water canal. That’s why the abrasive elastomer is added to the stator designing and rotor is made of steel 40X13 with thermal treatment. An ...

  • Installation of a Bar Screen with a Screw Compactor

    We have recently installed on a wastewater treatment plant in the East of France a Bar Screen along with a Screw Compactor. The package Bar Screen/Screw Compactor is installed within a lift pumping station. Project Description Supply of a Bar Screen Type NG, stainless steel 316L, width 500mm, bar spacing 6mm, max flow 130m3/h Supply of a screw compactor ...


    By FB Procédés

  • Mouvex to Display Leading Screw Compressor Technology at IAA Show 2014

    Mouvex®, part of Pump Solutions Group (PSG®) and a leading manufacturer of positive displacement pumps, is pleased to announce that it will be featuring its leading screw compressor technology for the international commercial vehicle industry at the 65th Annual International Motor Show (IAA) Commercial Vehicles. The IAA Show – which is the world’s largest trade show for ...


    By MOUVEX

  • High-performance Pump

    Olaer is now introducing a new extremely compact screw pump solution for medium flow applications up to 190l/min, to complement our existing range of gerotor pumps with flows up to 80l/min. The OHP type of screw pump is a dependable, low noise and economical low pressure pump free from pulsations ensuring long service life of any application. The OHP screw pump can be fitted with ...

  • Peristaltic pumps for pumping concrete-fibreglass mixture

    Pumping concrete-fibreglass mixture Concrete is composed of cement and “other ingredients” such as limestone, gravel, granite, fly ash, etc. Some soft-grind components such as sand and parts of water will give you a perfect concrete structure. Concrete is a very heavy fluid (normal concrete = 2400 kg/m3). Concrete is viscous and very abrasive because of the sand and ...

  • Are your pumps protected?

    Magnetic Scrubber Technology improves Pump PerformanceFerrous metal contamination in fluid results in premature wear and failure of pumps resulting in down-time for repairs and increased operational costs. The 5000 Series Magnetic Scrubber reduces pump damage caused by corrosion and erosion, which extends pump component life and reduces pump maintenance or replacement. When installed prior to ...


    By One Eye Industries Inc.

  • Safe and clean: Allweiler pumps with Allseal

    Screw pumps made by Allweiler AG are now available with a new opto-e/lectronic module. Known as 'Allseal”, this new product detects wear of the mechanical seal as soon as it begins and immediately warns the operator of any leaks. The pump can then be automatically switched off and pumping tasks switched over to a secondary unit. Plant operators recognize pumps as the heart of their systems and ...


    By ALLWEILER GmbH

  • NETZSCH Pumps & Systems does the triple

    The NETZSCH Pumps & Systems GmbH in Waldkraiburg were granted the three certificates in accordance with OHSAS 18001, ISO 14001 and ISO 9001 by the SGS International Certification Services beginning of March this year. This success has been mainly achieved by the department "Integrated Quality Systems". Therefore the requirements of the internationally recognised DIN EN ISO 14001 and ...


    By NETZSCH Group

  • Less and More: Why You Should Pump Slurries with a Peristaltic Pump

    LESS WATER Peristaltic Pumps Use Less Water Hose pumps can circulate slurry SGs of 1.6 to 1.8 or up to 80% solid content. The traditional centrifugal pump loses efficiency when the slurry SG reaches 1.3 or 30% solids. With this limitation, slurry pumps have significant process water demands : on a plant processing 70 tonnes of ore per hour, ...

  • Double face seal on submerged SOLTEC pumps

    According to the Customer’s technical task SOLTEC company Novomoskovsk Mechanical Plant produces the vertical screw pumps of various assemblies for chemical industry to pump aggressive acid and abrasive liquid media. Pumps are made of stainless corrosion-resistant alloys with double face seal excluding pumping fluid ...

  • NOV® Mono® makes pump maintenance a piece of cake!

    One year on from the launch of its ground-breaking EZstripTM progressing cavity (PC) pump, NOV® Mono®, Europe’s leading designer and manufacturer of pumps, parts, Munchers®, screens and packaged systems, has launched another maintain-in-place (MIP) innovation which is set to revolutionise the maintenance of a PC sludge cake pump. Specifically designed to minimise the time and ...

  • Colfax fluid handling delivers bitumen pumps to Russia

    In June of 2012, Colfax Fluid Handling delivered a package of 21 Allweiler screw and centrifugal pumps for a bitumen production facility in Russia. The pumps are an important part of the plant, which is located in Novoshakhtinsk (Rostov region) and produces bitumen according to the "Biturox" process from Vienna-based Pörner Ingenieurgesellschaft mbH. The thirteen Allweiler screw pumps of the ...


    By ALLWEILER GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you