single stage shredding News

  • Complete 2-stage plastic recycling system available

    A complete 2 stage shredding and granulating system that was built in 2006 and was only run for 3000 hours has come up for sale and we are ready to disassemble and deliver anywhere in the US. The system includes: - Infeed conveyor for shredder- Single shaft shredder, WEIMA Model WLK-15- Shredder discharge and granulator infeed conveyor- Metal detection and separation equipment- Granulator, MPG ...


    By eFACTOR3 LLC

  • Columbus McKinnon Europe Installs Stage One and Stage Two Processing for FDG Recycling, Sardinia, Italy

    CM Europe recently completed the installation and start-up of a stage one and stage two processing system as a part of a complete crumb rubber plant. Stage one consists of the CM Primary Shredder. This machine is specifically designed to process European super single truck tires. Stage one will reduce whole tires to 6" x 6" or 300 x300 mm tire shred. Stage two introduces the CM4R Liberator. The ...

  • The WEIMA PowerLine is the most versatile high capacity shredder for the recycling

    The WEIMA PowerLine is the most versatile high capacity Shredder for the Recycling, and Waste to Energy Industry. This machine is ideally suited as a high capacity secondary shredder in a multi-stage operation or as a SINGLE STAGE Shredding solution for clean material streams from post industrial waste. Whether it is plastic in form of purging, profiles, pipes, film, fibers or paper, cardboard, ...


    By eFACTOR3 LLC

  • Secure file destruction with certified UNTHA shredder

    LAGER 3000 GmbH, established in 1999, is one of today’s leading providers of file and data storage, archive management and file digitalization solutions. The company's customers include well-known banks, public authorities, courts, insurance companies as well as trade and commerce firms. Recently, the company started offering customers a secure file and data destruction service according to ...


    By UNTHA Shredding Technology

  • M&J Shredders and used machine specials from eFACTOR3

    eFACTOR3, headquartered in Charlotte North Carolina, is a complete solutions provider of recycling and waste-to-energy equipment. e3 offers a wide range of machines for the recycling industry including shredding, cleaning, granulating and extruding equipment. Use M&J Pre-Shredders to Increase Efficiency M&J (Metso Denmark) has been ...


    By eFACTOR3 LLC

  • M&J 6000S-16 shredder for E.ON Värme Sverige

    In 2002, M&J Industries A/S supplied two M&J 6000S-12 shredders to the E.ON Värme Sverige facility. These shredder units were intended for the preliminary shredding of the flow of waste down to a grain size of <300 mm, before it passed on to two traditional hammer mill installations for final pre-incineration processing. Crucial for the flowThe overall efficiency of this CFB ...


  • Tire Chipper Prototype

    After months of design and fabrication we are now in the final stages of testing for our newest product. Our Sidewall Chipper will create chipped rubber from sidewalls that have had their beads removed in a single pass with no need for steel extraction.  Removal of the bead wire prior to chipping creates a more efficient machine that results in an affordable end product for our customers. ...

  • IFAT fuels record interest in UNTHA waste shredders

    The Austrian-headquartered team travelled to Munich for the bi-annual event, excited to demonstrate their shredders to some of Europe’s most established waste management organisations. But footfall to the stand surpassed all expectations, with visitors from as far afield as Japan eager to see the much-talked-about shredders. Almost 100 delegates from more than 15 countries participated in ...


    By UNTHA Shredding Technology

  • Polish CEMEX cement plant relies on WEIMA

    In the eastern Polish town of Chelm, not far from the Ukrainian border, the waste recycling company EkoPaliwa recently successfully commissioned their new plant for the production of alternative fuels. Two WEIMA PowerLine 3000 single-shaft shredders with a powerful hydraulic drive used in secondary shredding absolutely take center stage here. The main buyer of the produced Refuse Derived Fuel ...


    By WEIMA

  • Increasing efficiency with TRIA granulators and eFACTOR3

    eFACTOR3, headquartered in Charlotte North Carolina, is a complete solutions provider of recycling and waste-to-energy equipment. e3 offers a wide range of machines for the recycling industry including shredding, cleaning, granulating and extruding equipment. e3 Adaptive Blades- Built to Last After our feature on the new e3 Adaptive Blade System in June, ...


    By eFACTOR3 LLC

  • IFAT 2016: NEW WEIMA PowerLine and FineCut waste shredders

    Just in time for IFAT 2016, the shredding specialist from Ilsfeld unveils its completely revised single-shaft shredder for waste shredding. Visitors in Munich will be the first to experience the innovations live. Designed for universal use, WEIMA’s PowerLine 3000 with powerful hydraulic drive will be on display. No material is like the other. No matter if it is commercial waste, bulky or ...


    By WEIMA

  • WEIMA Premieres Shredder at K 2016

    What event could provide a more suitable framework for a product presentation than the leading trade show in the plastics industry in Dusseldorf? The size reduction specialist from Ilsfeld (Germany) will present its all-new WKS single-shaft shredder series with 1400, 1800, and 2200 mm working width. Because they were specially designed for plastic applications, the new machines aim for shredding ...


    By WEIMA

  • Eriez magnetics - PR1019 Eriez introduce new equipment at RWM and IFAT 2010

    Optimum separation is a key stage in all applications. Eriez has designed and developed an extensive range of separators utilising magnetic principles, and at RWM, UK (stand 1410, Hall 17) and IFAT, Germany (Stand 500, Hall B3) in September 2010, Eriez will be launching 3 new systems for non ferrous and ferrous metal recovery. On the exhibition stands at both RWM and IFAT, Eriez will be ...


    By Eriez Magnetics Europe Ltd

  • Opening up the energy markets; speech to Energy UK

    Introduction I want to start today by saying how crucial your work is to the country. You produce and supply the energy that keeps our society running. That heats our homes, lights our streets and powers our working lives. Every single day, working together, you supply the country with one billion kilowatt hours of electricity. Enough power to make 50 ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you