sludge dewatering News

  • Sludge Dewatering Machine About to Take Plane

    Thanks to the valued trust of our partner, two lucky sludge dewatering machine with plywood case will take planes to a wonderful land! Screw Press Sludge dewatering, with the compact design and structure, are more and more used into sludge handling projects and taking the place of filter press. With the unique advantages, it save people from heavy labor and hevy mud removal work.  We ...

  • MSE Hiller offering sludge dewatering

    MSE Hiller specialise in the supply of High performance sludge dewatering equipment to the Water and Wastewater treatment Industries. Effluents may be clarified and sludges dewatered or thickened using Hiller centrifuges at process rates of 1 to 150 m3/hr. A fleet of mobile hire units, some with lime stabilisation plants, are available to rent for temporary sludge dewatering duties at cusomers’ ...


    By MSE Hiller Limited

  • Maersk supply service order new building from Damen

    When one of the largest supply shipping companies approached us to help them treat oily sludge and contaminated bilge, we were a little intimidated. However this has been an exciting challenge. We have developed and produced different types of Sludge Dewatering Separators and our current task is to develop a new system for treating the heavy fuel sludge drain water on this new building. We ...

  • Three Mearsk Supply vessels to operate in Brazilian waters

    There’s a lot of hectic activity at our workshop, where we’re finalizing the last of three Sludge Dewatering Separator (SDS), which will be dispatched to Poland where they will be installed in three Mearsk Supply vessels to operate in Brazilian waters. It is no coincidence that Mearsk Supply chooses to mount The SDS in these boats, it costs namely between 500 U.S. $ to 600 US$ per m3 ...

  • Decaoil Decapress New range of Centrifuges

    M&SE Hiller specialise in the supply of Hiller dewatering equipment to the Water and Wastewater treatment Industries. Effluents can be clarified and sludges dewatered or thickened using Hiller centrifuges at process rates of 1 to 150 m3/hr. Three phase Decaoil® units are supplied for oily sludges and oil / water / solid separation duties. Recent installation has included a tallow ...


    By MSE Hiller Limited

  • The New Flottweg Xelletor Series @Weftec 2018

    Sewage sludge dewatering can get expensive, so the savings potential for sewage treatment plant operators is immense. The formula is simple. Dryer sludge equals less sludge. Less sludge equals lower disposal costs. Flottweg will present the next generation of sewage sludge dewatering decanters at Weftec 2018. The secret to the outstanding performance of this decanter centrifuge is inside, in the ...


    By Flottweg SE

  • Continuous innovation – another new decanter size from Alfa Laval

    Alfa Laval Booth 29017, Hall B Visit Alfa Laval, Stand #29017, Hall B at the upcoming WEFTEC 2008 show in Chicago, Illinois, October 18-22, 2008 The Swedish multi-national engineering group, Alfa Laval will feature its recent developments and solutions within water and waste water treatment during WEFTEC 2008. From the beginning, Alfa Laval's ALDEC G2 decanter family managed to set a new ...


    By Alfa Laval Corporate AB

  • Process description of Screw Press Sludge Dewatering Machine

    Working Principle: When the sludge is thickened by gravity, the sludge is transported to the dehydrating section. In the process of advancing, with the gradual smaller of the seam and pitch, and the obstruction of the back pressure plate, the internal pressure is produced and the volume is reduced continuously to achieve the purpose of full ...

  • Sludge Dewatering Machine&Polymer Dosing Machine for BASF Chemical

    On 13th September, after services engineer went to BASF Chemical's operation site. And together with engineers on site, we help them complete the sludge dewatering house. Three sets of polymer dosing tanks and one set Screw Press sludge dewatering machine installed for BASF Chemical. Thanks for all the valuable trust, we will keep moving and providing high-quality products. Advantages of our ...

  • AMCON announces order of New Sludge Dewatering Press “Volute VDC-121 Model” for Ueno Industry Co., Ltd.

    AMCON INC. (Headquarters: Yokohama, Kanagawa, CEO: Shoichi Sasaki), manufacturing and selling of sludge treatment equipments, today announced that we received an order of New Sludge Dewatering Press “Volute VDC-121 Model” for Ueno Industry Co., Ltd. (Headquarters: Nakano-ku, Tokyo). The equipment is being delivered in August 2012. ...


    By AMCON Inc.

  • NEW model DP764 mobile rig launched at IFAT 2016 exhibition in Munich

    MSE Hiller used IFAT, the largest waste water and environmental exhibition in Europe to launch their new state of the art DP764 mobile sludge dewatering rig in Munich Germany recently. The 45 foot trailer mounted rig uses the new Hiller model DP764 Decapress machine and offers capacities up to 130 m3/hr at g forces of up to 3,000 x g. Fitted with a modern SEE centrifuge control system and easy to ...


    By MSE Hiller Limited

  • Three Sludge Dewatering Lines for Baiyun, China

    On October 25, 2010 three sludge dewatering lines left our Düren plant en route to our customer Zhumadianshi Baiyun Paper, a pulp and paper mill situated in the north of China. This consignment is the largest order in the history of BELLMER KUFFERATH as a supplier of screw presses for sludge dewatering purposes. Each of the three lines basically consists of an FR flocculation reactor, an ...


    By Bellmer GmbH

  • H2Flow DAF installation for a railway company

    H2Flow provided a complete engineered DAF Treatment System for treating the washdown of rail cars. H2Flow also provided a pipe flocculator, chemical dosing system, sludge tank, pumps, sludge dewatering press, and a PLC control ...


    By H2Flow Equipment Inc.

  • The MAIOR HS installed at the WWTPs of the Autonomous Province of Trento

    At the Malè and Faver WWTPs of the Autonomous Province of Trento, has been successfully completed within January 2014 the installation and commissioning of the sewage sludge dewatering plants, by centrifugation, with the latest version of the Pieralisi decanters, the MAIOR HS series. Pieralisi supplied the complete dewatering plants, which include besides the MAIOR 4 HS RTV DFA ...


    By Pieralisi Group

  • Pieralisi Group Arrives in Saudi Arabia

    Suido Kiko Middle East (“SKME”) is one of the main engineering and construction companies based in Jeddah that specializes in providing solutions in the water & waste water sectors. The company is a Joint venture between Saudi Brothers Commercial Company Group and Suido Kiko Kaisha of Japan. "SKME" also prides itself as the first engineering company ...


    By Pieralisi Group

  • Pieralisi Group Arrives in Saudi Arabia

    Suido Kiko Middle East(“SKME”) is one of the main engineering and construction companies based in Jeddah that specializes in providing solutions in the water & waste water sectors. The company is a Joint venture between Saudi Brothers Commercial Company Group and Suido Kiko Kaisha of ...


    By Pieralisi Group

  • Newly developed machinery to Mexico

    Hydria Water has recently delivered several products from the portfolio to a returning client in Mexico. Previously there was plastic chain & flight scrapers with scum pipes and a stepscreen of Cross Screen XS type for the inlet screening. The latest order included a Disc Press QS from our Mellegard & Naij portfolio, the machine is a recently developed machine for sludge dewatering. The ...


    By Hydria Water AB

  • Screw Press Sludge Dewatering Machine

    Before, screw presses, centrifuges and belt presses are used as a common method to dewater. However, they require continuous watching, high energy consumption, and people maintenance. Typically, screw presses utilize perforated or slotted openings, designed to allow liquids to escape as the sludge is pressed. Often this results in unsatisfactory dewatering performance at low pressure, or in ...

  • DEWACO ink agreement to provide sophisticated Dewatering facilities to Alexandria City

    Dewa Water and Energy recently signed an agreement with the Egyptian city of Alexandria to upgrade the Sludge Dewatering facilities of the Alexandria West Wastewater Treatment Plant. The plant, which currently has a capacity of 460,000 m3/day will be refurbished by the end of 2012 to process a capacity of 680,000 m3/day. DEWACO is excited to be a part of this project, and applauds this ...


    By Dewaco OY

  • Thank you from IFAT!

    Thank you all who came by the Hydria Water booth at IFAT in Munich last week. It was an amazing exhibition with lot’s of visitors coming by with a lot of new ideas where we could assist with solutions. partners were present bringing their clients to meet with us and all together we got so many new interesting cases says Marko Kunerus. ...


    By Hydria Water AB

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you