sludge dewatering system News

  • New revolutionary Sludge Dewatering Separator (SDS)

    Now there is good news to all those who have to handle hydrous oily sludge, both on land and at sea. Faroe Maritime Technic (FMT), have during the latest 9 months developed and tested a prototype, to separate free and emulsified water from oily-sludge. The system was originally a book up task from a large Danish shipping company, who wanted a total solution, ...


    By Faroe Maritime Technic

  • Three Sludge Dewatering Lines for Baiyun, China

    On October 25, 2010 three sludge dewatering lines left our Düren plant en route to our customer Zhumadianshi Baiyun Paper, a pulp and paper mill situated in the north of China. This consignment is the largest order in the history of BELLMER KUFFERATH as a supplier of screw presses for sludge dewatering purposes. Each of the three lines basically consists of an FR flocculation reactor, an ...

  • Danish Sludge Dewatering Plant Chooses Hanovia Uv

    To ensure wastewater is effectively disinfected before being mixed with a polymer for subsequent sludge decantation (separation) and dewatering, the Stege Kommune municipality in Denmark has installed ...

  • The Ultimate Solution for treating HF-Sludge: Sludge Dewater Evaporator

    Treats heavy fuel (HF) sludge drain water from >100ppm to 0ppm. The content in the "dark" bottle is the untreated drain water from heavy fuel sludge. The drain water is treated in a vacuum boiler, and the content in the "light" bottle, is the result - 0 ppm. The process is fully automatic, and reduces the HF-sludge volume by more than 80%. This is the ultimate solution for treating ...


    By Faroe Maritime Technic

  • Moyno 2000 HS System effectively handles dewatered sludge cake

    Moyno, Inc. offers the 2000 HS System as the cost-effective alternative to expensive, high-maintenance piston pumps and open conveyors for dewatered sludge transfer in municipal wastewater treatment. It features an integral hopper with a twin-screw auger feeder and Moyno G4 progressing cavity pump that efficiently handles semi-dry, high solids, dewatered municipal sludge to over 50 percent ...


    By Moyno, Inc.

  • Moyno 2000 HS System Technology Targets Dewatered Sludge Cake

    The Moyno 2000 HS system is a significant technology advancement for the wastewater treatment industry. It can pump filter cake further distances with higher volumetric efficiencies than any other progressing cavity pump. Its twin-screw feeder supplies a constant, pressurized feed rate to the pump resulting in a 100 percent pump cavity fill rate. The Moyno 2000 HS System features an integral ...


    By Moyno, Inc.

  • Moyno 2000 HS System effectively handles dewatered sludge cake

    Moyno, Inc. offers the 2000 HS System as the cost-effective alternative to expensive, high-maintenance piston pumps and open conveyors for dewatered sludge transfer in municipal wastewater treatment. It features an integral hopper with a twin-screw auger feeder and Moyno G4 progressing cavity pump that efficiently handles semi-dry, high solids, dewatered municipal sludge to over 50 percent ...


    By Moyno, Inc.

  • The Flottweg Decanter Centrifuge C2E – Top Product of the Month in September

    Prozesstechnik Online named a Top Product of the Month for the ninth time this year. In September, our Decanter C2E was the clear winner. This centrifuge is specially designed for sludge dewatering at small sewage treatment plants. Our C2E puts the know-how gained from our big environmental decanters into a compact package. This ...


    By Flottweg SE

  • PHOENIX Process Compact Dewatering Systems

    PHOENIX Process Equipment Co. offers a series of affordable compact belt filter presses and gravity belt thickeners specifically designed for smaller industrial and municipal wastewater plants. When supplied as skid mounted systems, they include all necessary pumps, controls, polymer dosing systems, and require only four external connections, greatly simplifying installation The compact ...

  • Filter Press Draco, excellence in dewatering

    Maximum dewatering and dry solids production, large filtration area in a short space, automatic control system, low chemical consumption, after-sales technical assistance. Process flexibility-easily accommodates fluctuating inlet consistency. User friendly-simple, safe & reliable operation. Capable of operating in fully automatic, FPA, semi-automatic, FPSA, completely in manual mode, FPM and ...


    By Toro Equipment S.L.

  • The new ANDRITZ C-Press: efficient sludge dewatering with high performance and low operating costs

    International technology Group ANDRITZ has launched new sludge dewatering equipment for waste water treatment plants, industrial treatment plants, and food applications. The ANDRITZ C-Press, a screw press providing high performance combined with compact design, features low operating costs. With its direct drive system and conical shaft with constant screw pitch, the new press can handle inlets ...

  • Compact dewatering systems from PHOENIX Process Equipment Co.

    PHOENIX Process Equipment Co. offers a series of affordable compact belt filter presses and gravity belt thickeners specifically designed for smaller municipal wastewater plants. When supplied as skid mounted systems, they include all necessary pumps, controls, polymer dosing systems, and require only four external connections, thus greatly simplifying installation.The compact gravity belt ...

  • CAVIA – profit from sludge

    A combination of in-depth technical knowledge and widespread process experience, has kept Dewaco at the forefront of waste water and sludge handling technologies for more than two decades. Renowned for its high quality and performance, the DEWA range of equipment and solutions has been specifically designed to serve the sludge handling needs of municipal and industrial customers around the ...


    By Dewaco Ltd

  • Sludge-to-Power research

    Researchers at the University of Nevada, Reno, are conducting experiments in the transformation of wastewater sludge to electrical power at the Truckee Meadows Water Reclamation Facility. Ultimately, the plant’s electrical power could be supplied on-site by the process under development. "We are very pleased with the results of the demonstration testing of our research", Chuck Coronella, ...

  • Aquatech dewatering expands services into newfoundland and labrador

    Aquatech Dewatering Company and Aquatech Pump and Power announced that they are expanding their services to the Canadian East Coast and plan to open a full service branch in Newfoundland this year. Aquatech currently is an exclusive distributor of Godwin Pumps, Hudig Pumps and Dragflow Pumps. Aquatech is a fast growing, full service provider of dewatering services in the mining and construction ...


    By Aquatech Dewatering Company

  • Aquatech dewatering opens new branch in Ontario

    Aquatech Dewatering Company and Aquatech Pump and Power announced the opening of their new Sudbury, Ontario Branch for May 1st of this year. The Sudbury Branch is Aquatech’s third full service branch in Ontario; the head office in Concord and the Eastern Ontario branch in Ottawa. The new branch is strategically located in close proximity to Northern Ontario's surging mining sector which is ...

  • Aquatech Dewatering Opens New Branch In Sudbury, Ontario

    Aquatech Dewatering Company and Aquatech Pump and Power announced the opening of their new Sudbury, Ontario Branch for May 1st of this year. The Sudbury Branch is Aquatech’s third full service branch in Ontario; the head office in Concord and the Eastern Ontario branch in Ottawa. The new branch is strategically located in close proximity to Northern Ontario's surging mining sector ...

  • Aquatech dewatering expands services into Newfoundland and Labrador

    Aquatech Dewatering Company and Aquatech Pump and Power announced that they are expanding their services to the Canadian East Coast and plan to open a full service branch in Newfoundland this year. Aquatech currently is an exclusive distributor of Godwin Pumps, Hudig Pumps and Dragflow Pumps. Aquatech is a fast growing, full service provider of dewatering services in the mining and construction ...


    By Aquatech Dewatering Company

  • Aquatech Dewatering Opens New Branch In Sudbury, Ontario

    Aquatech Dewatering Company and Aquatech Pump and Power announced the opening of their new Sudbury, Ontario Branch for May 1st of this year. The Sudbury Branch is Aquatech’s third full service branch in Ontario; the head office in Concord and the Eastern Ontario branch in Ottawa. The new branch is strategically located in close proximity to Northern Ontario’s surging mining ...

  • Aquatech Dewatering Expands Services Into Newfoundland and Labrador

    Aquatech Dewatering Company and Aquatech Pump and Power announced that they are expanding their services to the Canadian East Coast and plan to open a full service branch in Newfoundland this year. Aquatech currently is an exclusive distributor of Godwin Pumps, Hudig Pumps and Dragflow Pumps. Aquatech is a fast growing, full service provider of dewatering services in the mining and construction ...


    By Aquatech Dewatering Company

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you