sludge press News

  • New Sludge Dewatering Press -Reduction in Total Cost by 30%!

    Long-awaited Appearance of New Volute Dewatering Press-The New Model Exhibited in “NEW Environment Expo 2011” Held in Tokyo Big Sight- AMCON INC. (Headquarters: Yokohama, Kanagawa, CEO: Shoichi Sasaki), manufacturing and selling of sludge treatment equipment, is going to start sell the new model sludge dewatering equipment “Volute VDC-121 Model” from May 24th, 2011. The ...


    By AMCON Inc.

  • Using ozone to reduce sludge

    Untitled Document An excess of sludge in a sewage treatment plant is not a new problem. For a long time, “end of pipe” ...


  • CAVIA – profit from sludge

    A combination of in-depth technical knowledge and widespread process experience, has kept Dewaco at the forefront of waste water and sludge handling technologies for more than two decades. Renowned for its high quality and performance, the DEWA range of equipment and solutions has been specifically designed to serve the sludge handling needs of municipal and industrial customers around the ...


    By Dewaco Ltd

  • The new ANDRITZ C-Press: efficient sludge dewatering with high performance and low operating costs

    International technology Group ANDRITZ has launched new sludge dewatering equipment for waste water treatment plants, industrial treatment plants, and food applications. The ANDRITZ C-Press, a screw press providing high performance combined with compact design, features low operating costs. With its direct drive system and conical shaft with constant screw pitch, the new press can handle inlets ...

  • AMCON announces order of New Sludge Dewatering Press “Volute VDC-121 Model” for Ueno Industry Co., Ltd.

    AMCON INC. (Headquarters: Yokohama, Kanagawa, CEO: Shoichi Sasaki), manufacturing and selling of sludge treatment equipments, today announced that we received an order of New Sludge Dewatering Press “Volute VDC-121 Model” for Ueno Industry Co., Ltd. (Headquarters: Nakano-ku, Tokyo). The equipment is being delivered in August 2012. ...


    By AMCON Inc.

  • Belt press used in Textile industry

    We have been awarded a project of dewatering sludge coming from sedimentation tank of textile wastewater treatment plant. This plant has once used 4 units chamber filter press(1000x1000, 80 m2) , to process the waste sludge three years ago, but they are not satisifed for the performace. After further checking and discussion with us, they award us for using our Environmental type belt press to ...

  • Filter Press Draco, excellence in dewatering

    Maximum dewatering and dry solids production, large filtration area in a short space, automatic control system, low chemical consumption, after-sales technical assistance. Process flexibility-easily accommodates fluctuating inlet consistency. User friendly-simple, safe & reliable operation. Capable of operating in fully automatic, FPA, semi-automatic, FPSA, completely in manual mode, FPM and ...


    By Toro Equipment S.L.

  • Sludge cleans waste water in Singapore

    Clean water is in short supply in Singapore and therefore innovative thinking is necessary, as the city-state ensures its access to the scarce resource. Grundfos has received a good 1.2 million euro to sophisticate a brand new technology in which the waste water is treated through sludge. The cleansed water can help ease the strain on the water resources in the area. At the beginning of next ...


    By Grundfos

  • 21st century metal sludge recycling

    The ever increasing price for raw materials and our customers’ desire for independence from international resource suppliers was the driver behind our newly developed process to recycle grinding sludges from the metal industry. Until now it has been usual to mechanically separate the oil and press the metal swarf with the remaining oil afterwards. But the emerging low-grade ...


    By econ industries GmbH

  • Plate Filter Press Model. FD-M

    Plate Filter Press Model FD-M is especially designed for dewatering the slurry with grease by our R&D. It has been proven to have the capability of solving the difficulty in effectively minimizing the moisture of the grease sludge in dewatering, confronted by most oil refinery plants and power plants. The type mainly adopts membrane chamber system, combined with dedicated filter cloth, which ...

  • PHOENIX Announces Expanded Belt Filter Press Line

    PHOENIX Process Equipment Co., of Louisville, Kentucky, has announced an expanded line of Model WX Belt Filter Presses. The new PHOENIX Model WX-D features dual gravity zones for maximum hydraulic flow rates per meter of belt width on very difficult, low feed solids biological sludge applications. The integral third belt pre-thickener accelerates gravity drainage, while the extended gravity ...

  • PHOENIX Announces Expanded Belt Filter Press Line

    PHOENIX Process Equipment Co., of Louisville, Kentucky, has announced an expanded line of Model WX Belt Filter Presses. The new PHOENIX Model WX-D features dual gravity zones for maximum hydraulic flow rates per meter of belt width on very difficult, low feed solids biological sludge applications.  The integral third belt pre-thickener accelerates gravity drainage, while the extended ...

  • Three Sludge Dewatering Lines for Baiyun, China

    On October 25, 2010 three sludge dewatering lines left our Düren plant en route to our customer Zhumadianshi Baiyun Paper, a pulp and paper mill situated in the north of China. This consignment is the largest order in the history of BELLMER KUFFERATH as a supplier of screw presses for sludge dewatering purposes. Each of the three lines basically consists of an FR flocculation reactor, an ...

  • High-end sludge treatment solutions for demanding applications

    DEWACO LTD offers solutions to the world's most complex sludge treatment problems. The company can also help to reduce environmental impacts and substantially improve efficiency in producing bioenergy from waste.  The company provides complete sludge thickening, dewatering and sludge removal systems. Its combined process ...


    By Dewaco Ltd

  • PHOENIX Process Equipment Co Announces Expanded Belt Filter Press Line

    PHOENIX Process Equipment Co., of Louisville, Kentucky, has announced an expanded line of Model WX Belt Filter Presses. The Model WX is available in several different configurations, each suited to the specific application. Many of its design features were selected particularly for rugged mining and aggregate installations. The basic configuration includes a fully welded mainframe, ...

  • $1 Billion/yr Market for Belt Filter Presses and Replacement Belts

    Belt filter presses were developed in the 1970s and became popular just as the McIlvaine Company published the first issue of the Liquid Filtration Newsletter in 1980. This design rapidly replaced drum filters for many dewatering applications from sewage sludge dewatering to sludges in food, mining and other industries. Over the years the number of operating units has increased to more than ...


    By The McIlvaine Company

  • Moyno 2000 HS System Technology Targets Dewatered Sludge Cake

    The Moyno 2000 HS system is a significant technology advancement for the wastewater treatment industry. It can pump filter cake further distances with higher volumetric efficiencies than any other progressing cavity pump. Its twin-screw feeder supplies a constant, pressurized feed rate to the pump resulting in a 100 percent pump cavity fill rate. The Moyno 2000 HS System features an integral ...


    By Moyno, Inc.

  • `To Your Health` - Distillery sludge used to treat radioactive sites

    It's not the usual association that comes to mind - drinking your favourite brew and nuclear wastes - but a new study shows how distillery sludge can help solve one of our most pressing environmental problems. According to a new study, contaminated sites can be treated with sludge from the treatment of distillery wastewater in bioreactors. The study demonstrates an efficient method for ...


    By GLOBE Foundation

  • IFAT CHINA + EPTEE + CWS 2010: What to do with sewage sludge?

    In recent years China has developed into one of the world’s biggest markets for sewage treatment. According to the Chinese Ministry of Environmental Protection, over 20 billion euros was invested by the end of 2008 in around 1,550 sewage plants in the People's Republic. Together these facilities process 86 million tons of sewage each day. 'Despite the high level of expenditure on cleaning the ...


    By Messe München GmbH

  • IFAT CHINA 2008 - Solutions for handling mountains of sewage sludge

    China is facing huge problems because of an ever growing quantity of sewage sludge – the country urgently needs practical, ecological and economic solutions to deal with the situation. China is therefore looking abroad to see how foreign know-how and efficient technologies can be used. All of which will be showcased at the environmental trade fair IFAT CHINA, which takes place in Shanghai from 23 ...


    By Messe München GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you